Current Science

Open Access Open Access  Restricted Access Subscription Access

Bearing capacity of spatially variable unsaturated fly ash deposit using random field theory


Affiliations
1 Department of Civil Engineering, Indian Institute of Technology (Indian School of Mines) Dhanbad, Dhanbad 826 004, India
2 Department of Civil Engineering, Indian Institute of Technology (Indian School of Mines) Dhanbad, Dhanbad 826 004, India
 

The aim of the present study is to examine the bearing capacity of a spatially variable, unsaturated fly ash deposit, based on finite element limit analyses. Strength nonlinearity of fly ash, arising due to partial saturation, has been modelled based on the well-known van Genuchten (vG) fitting parameters, obtained from the water retention characteristics curve (WRCC). For the probabilistic study, WRCC fitting parameters and angle of internal friction of the fly ash deposit have been considered as stationary Gaussian random fields within a practicable range of coefficient of variation and anisotropic correlation lengths. Random field has been generated based on the Karhunen–Loeve expansion method. Adequate numbers of Monte-Carlo simulations have been executed to evaluate the probabilistic distribution of the bearing capacity, considering strength nonlinearity as well as the random distribution of the input parameters. Influence of stationary spatial variation of WRCC fitting parameters and friction angle on the probability of failure of a footing resting on the fly ash deposit is presented and observations are duly explained. The results of this study would be useful for practising engineers to design a safe fly ash fill and therefore offer a sustainable solution for the bulk utilization of fly ash in geotechnical engineering applications.

Keywords

Bearing capacity, finite element limit analysis, geotechnical engineering applications, probabilistic analysis, strength nonlinearity, unsaturated fly ash.
User
Notifications
Font Size

  • Nadaf, M. B. and Mandal, J. N., Behaviour of reinforced fly ash slopes with cellular mattress and strips under strip loading. J. Hazard. Toxic Radioact. Waste, 2017, 21(4); https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000376.

  • Prakash, A., Hazra, B. and Sreedeep, S., Probabilistic analysis of unsaturated fly ash slope. J. Hazard. Toxic Radioact. Waste, 2019, 23(1); https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000428.

  • Wang, D., Tawk, M., Indraratna, B., Heitor, A. and Rujikiatkamjorn, C., A mixture of coal wash and fly ash as a pavement substructure material. Transp. Geotech., 2019, 21, 100265; https://doi.org/10.1016/j.trgeo.2019.100265.

  • Bhatia, R. and Kumar, A., Load-settlement behavior of concrete debris pile in fly ash fill. J. Hazard. Toxic Radioact. Waste, 2020, 24(3), 04020006; https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000494.

  • Pant, A., Ramana, G. V., Datta, M. and Gupta, S. K., Comprehensive assessment of cleaner, sustainable and cost-effective use of coal combustion residue (CCR) in geotechnical applications. J. Clean. Prod., 2020, 271, 122570; https://doi.org/10.1016/j.jclepro.2020.122570.

  • Bhatt, A., Priyadarshini, S., Mohankrishnan, A. A., Abri, A., Sattler, M. and Techapaphawit, S., Physical, chemical, and geotechnical properties of coal fly ash: a global review. Case Stud. Constr. Mater., 2019, 11; https://doi.org/10.1016/j.cscm.2019.e00263.

  • Fredlund, D. G. and Morgenstern, N. R., Stress state variables for unsaturated soils. J. Geotech. Eng. Div. Am. Soc. Civ. Eng., 1977, 103, 447–466; https://doi.org/10.1061/AJGEB6.0000423.

  • Fredlund, D. G., Morgenstern, N. R. and Widger, R. A., The shear strength of unsaturated soils. Can. Geotech. J., 1978, 15(3); https://doi.org/10.1139/t78-029.

  • Fredlund, D. G. and Rahardjo, H., Soil Mechanics for Unsaturated Soils, Wiley, New York, USA, 1993, p. 517; https://doi.org/10.1002/9780470172759.

  • Oloo, S. Y., Fredlund, D. G. and Gan, J. K. M., Bearing capacity of unpaved roads. Can. Geotech. J., 1997, 34(3), 398–407; https://doi.org/10.1139/t96-084.

  • Xu, Y., Bearing capacity of unsaturated expansive soils. J. Geotech. Geol. Eng., 2004, 22, 611–625; https://doi.org/10.1023/B:GEGE.0000047043.29898.17.

  • Vahedifard, F. and Robinson, J. D., Unified method for estimating the ultimate bearing capacity of shallow foundations in variably saturated soils under steady flow. J. Geotech. Geoenviron. Eng., 2016, 142(4), 04015095; https://doi.org/10.1061/(ASCE)GT.19435606.0001445.

  • Vanapalli, S. K. and Mohamed, F. M. O., Bearing capacity of model footings in unsaturated soils. In Experimental Unsaturated Soil Mechanics (ed. Schanz, T.), Springer, Berlin, Germany, 2007, pp. 483–493; https://doi.org/10.1007/3-540-69873-6_48.

  • Vanapalli, S. K., Fredlund, D. G., Pufahl, D. E. and Clifton, A. W., Model for the prediction of shear strength with respect to soil suction. Can. Geotech. J., 1996, 33(3), 379–392; https://doi.org/10.1139/t96-060.

  • Zhang, C., Yan, Q., Zhao, J. and Wang, J., Formulation of ultimate bearing capacity for strip foundations based on the Meyerhof theory and unsaturated soil mechanics. Comput. Geotech., 2020, 126, 103734; https://doi.org/10.1016/j.compgeo.2020.103734.

  • Jin, L., Zhang, H. and Feng, Q., Application of improved radial movement optimization for calculating the upper bound of ultimate bearing capacity of shallow foundation on unsaturated soil. Comput. Geotech., 2019, 109, 82–88; https://doi.org/10.1016/ j.compgeo.2019.01.016.

  • Vo, T. and Russell, A. R., Bearing capacity of strip footings on unsaturated soils by the slip line theory. Comput. Geotech., 2016, 74, 122–131; https://doi.org/10.1016/j.compgeo.2015.12.016.

  • van Genuchten, M. Th., A closed-form equation predicting the hydraulic conductivity of unsaturated soils. Soil Sci. Soc. Am. J., 1980, 44(5), 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.

  • Oh, W. T. and Vanapalli, S. K., Modeling the stress versus settlement behavior of shallow foundations in unsaturated cohesive soils extending the modified total stress approach. Soils Found., 2018, 58(2), 382–397; https://doi.org/10.1016/j.sandf.2018.02.008.

  • Li, D. Q., Wang, L., Cao, Z. J. and Qi, X. H., Reliability analysis of unsaturated slope stability considering SWCC model selection and parameter uncertainties. Eng. Geol., 2019, 260, 105207; https://doi.org/10.1016/j.enggeo.2019.105207.

  • Hu, Y., Zhao, T., Wang, Y., Choi, C. and Ng, C. W. W., Direct simulation of two-dimensional isotropic or anisotropic random field from sparse measurement using Bayesian compressive sampling. Stochast. Environ. Res. Risk Assess., 2019, 33, 1477–1496; https://doi.org/10.1007/s00477-019-01718-7.

  • Shi, L., Yang, J. and Zhang, D., A stochastic approach to nonlinear unconfined flow subject to multiple random fields. Stochast. Environ. Res. Risk Assess., 2009, 23, 823–835; https://doi.org/ 10.1007/s00477-008-0261-3.

  • Lu, N., Godt, J. W. and Wu, D. T., A closed-form equation for effective stress in unsaturated soil. Water Resour. Res., 2010, 46(5), W05515; https://doi.org/10.1029/2009WR008646.

  • Bishop, A. W., The use of pore water coefficients in practice. Geotechnique, 1954, 4, 148–152; https://doi.org/10.1680/geot.1954.4.4.148.

  • Wu, Y., Zhou, X., Gao, Y., Zhang, L. and Yang, J., Effect of soil variability on bearing capacity accounting for non-stationary characteristics of undrained shear strength. Comput. Geotech., 2019, 110, 199–210; https://doi.org/10.1016/j.compgeo.2019.02.003.

  • Chen, W. F., Limit Analysis and Soil Plasticity, Elsevier, 2013.

  • Zhou, J. and Qin, C., Finite element upper bound analysis of seismic slope stability considering pseudo-dynamic approach. Comput. Geotech., 2020, 122, 103530; https://doi.org/10.1016/j.compgeo.2020.103530.

  • Martin, C. M., The use of adaptive finite-element limit analysis to reveal slip-line fields. Geotech. Lett., 2011, 1(2), 23–29; https://doi.org/10.1680/geolett.11.00018.

  • Anand, A. and Sarkar, R., A probabilistic investigation on bearing capacity of unsaturated fly ash. J. Hazard. Toxic Radioact. Waste, 2020, 24(4), 06020004; https://doi.org/10.1061/(ASCE)HZ.21535515.0000547.

  • Terzaghi, K., Theoretical Soil Mechanics, Wiley, New York, USA, 1943.

  • Cho, S. E. and Park, H. C., Effect of spatial variability of crosscorrelated soil properties on bearing capacity of strip footing. Int. J. Num. Anal. Methods Geomech., 2010, 34, 1–26; https://doi.org/10.1002/nag.791.

  • Griffiths, D. V. and Fenton, G. A., Bearing capacity of spatially random soil: the undrained clay Prandtl problem revisited. Geotechnique, 2001, 51(4), 351–359; https://doi.org/10.1680/geot.2001.51.4.351.

  • Lu, N. and Likos, W. J., Unsaturated Soil Mechanics, Wiley, New York, USA, 2004.

  • Lee, I. K., White, W. and Ingles, O. G., Geotechnical Engineering, Pitman, London, UK, 1983.

  • Griffiths, D. V., Fenton, G. A. and Manoharan, N., Bearing capacity of rough rigid strip footing on cohesive soil: probabilistic study. J. Geotech. Geoenviron. Eng., 2002, 128, 743–755; https://doi.org/10.1061/(ASCE)1090-0241(2002)128:9(743).

  • Shu, S., Gao, Y., Wu, Y. and Ye, Z., Undrained bearing capacity of two strip footings on a spatially variable soil with linearly increasing mean strength. Int. J. Geomech., 2021, 21(2); https://doi.org/10.1061/(ASCE)GM.1943-5622.0001904.


Abstract Views: 418

PDF Views: 155




  • Bearing capacity of spatially variable unsaturated fly ash deposit using random field theory

Abstract Views: 418  |  PDF Views: 155

Authors

Abhijit Anand
Department of Civil Engineering, Indian Institute of Technology (Indian School of Mines) Dhanbad, Dhanbad 826 004, India
Rajib Sarkar
Department of Civil Engineering, Indian Institute of Technology (Indian School of Mines) Dhanbad, Dhanbad 826 004, India

Abstract


The aim of the present study is to examine the bearing capacity of a spatially variable, unsaturated fly ash deposit, based on finite element limit analyses. Strength nonlinearity of fly ash, arising due to partial saturation, has been modelled based on the well-known van Genuchten (vG) fitting parameters, obtained from the water retention characteristics curve (WRCC). For the probabilistic study, WRCC fitting parameters and angle of internal friction of the fly ash deposit have been considered as stationary Gaussian random fields within a practicable range of coefficient of variation and anisotropic correlation lengths. Random field has been generated based on the Karhunen–Loeve expansion method. Adequate numbers of Monte-Carlo simulations have been executed to evaluate the probabilistic distribution of the bearing capacity, considering strength nonlinearity as well as the random distribution of the input parameters. Influence of stationary spatial variation of WRCC fitting parameters and friction angle on the probability of failure of a footing resting on the fly ash deposit is presented and observations are duly explained. The results of this study would be useful for practising engineers to design a safe fly ash fill and therefore offer a sustainable solution for the bulk utilization of fly ash in geotechnical engineering applications.

Keywords


Bearing capacity, finite element limit analysis, geotechnical engineering applications, probabilistic analysis, strength nonlinearity, unsaturated fly ash.

References





DOI: https://doi.org/10.18520/cs%2Fv122%2Fi5%2F542-556