Open Access
Subscription Access
An overview of key enabling technologies for DAE’s nuclear programme
Homi Jehangir Bhabha envisioned that the success of India’s nuclear energy programme would depend upon how soon the country becomes self-reliant in the manufacturing of required essential technologies, e.g. ultra-high vacuum systems, cryogenics and associated technologies, precision electronics, control and instrumentation, robotics, particle accelerators, plasma, lasers, etc. He initiated R&D programmes at TIFR, Mumbai, on few of these technologies immediately after taking over as Director in 1945, and expanded them once DAE was formed in 1954. In this article, we present a brief overview of R&D carried out by DAE during the past seven decades in the areas of key enabling technologies needed for the advancement of our nuclear programme. The tremendous efforts of DAE resulted in achieving self-reliance in the nuclear power programme as well as in the development of necessary technologies for investigation of fundamental science and for facilitation of societal and industrial growth in the country. DAE led the nation to not only become a partner in several international science megaprojects, e.g. LHC, FAIR, Fermilab, ITER, etc. but also took a leadership position in national megaprojects, i.e. MACE, LIGO-India and ADS.
User
Font Size
Information
- Venkataraman, G., Bhabha and his Magnificent Obsessions, Universities Press India Ltd, Hyderabad, 1994.
- Divatia, A. S. and Ambasankaran, C., Accelerator development in India. Pramana, 1985, 24, 227–244.
- Bhandari, R. K. and Roy, A., Next-generation particle accelerators for frontline research and wide-ranging applications in India – how to realize them? Curr. Sci., 2015, 108, 1608–1615.
- Bandyopadhyay, A., Naik, V., Dechoudhury, S., Mondal, M. and Chakrabarti, A., ANURIB – advanced national facility for unstable and rare ion beams. Pramana – J. Phys., 2015, 85, 505–515.
- Gowthami, R., Vanniarajan, C., Souframanien, J., Veni, K. and Renganathan, V. G., Efficiency of electron beam over gamma rays to induce desirable grain-type mutation in rice (Oryza sativa L.). Int. J. Radiat. Biol., 2021, 97, 727–736.
- Petwal, V. C. et al., Characterization of 10 MeV electron linac for radiation processing. In DAE-BRNS Indian Particle Accelerator Conference, Mumbai, 2006.
- Guin, J. P., Bhardwaj, Y. K., Naik, D. B. and Varshney, L., Evaluation of efficiencies of radiolysis, photocatalysis and ozonolysis of modified simulated textile dye waste-water. RSC Adv., 2014, 4, 53921.
- Chaudhary, N. et al., High energy electron beam induced improved thermoelectric properties of PEDOT:PSS films. Polymer, 2020, 202, 122645.
- Chaudhary, N. et al., Electron beam induced modifications of polyaniline silver nano-composite films: electrical conductivity and H2S gas sensing studies. Radiat. Phys. Chem., 2018, 153, 131–139.
- Ghodke, A. and Sharma A., Full energy operation of Indus-2. RRCAT Newsl., 2009, 22, 2.
- Ganguli, T., Experimental facilities at Indus-1 and Indus-2 synchrotrons. Phys. News, 2018, 48, 18–24.
- Surendran, P. et al. (eds), Accelerator mass spectrometry programme at BARC–TIFR pelletron accelerator. DAE-BRNS Indian Particle Accelerator Conference, 2006.
- Sharma, A. et al., First results of KALI-30 GW with 1 MV flash X-rays generation and characterization by imagine plate. J. Instrum., 2014, 9, 07011.
- Kapoor, S. S., Accelerator-driven sub-critical reactor system (ADS) for nuclear energy generation. Pramana, 2002, 59, 941.
- https://cds.cern.ch/record/2255762/files/CERN-Brochure-2017-002-Eng.pdf (accessed on 20 February 2022).
- Sahni, V. C., Indian contribution to the Large Hadron Collider under construction at CERN, Geneva. Curr. Sci., 2004, 87, 441–446.
- Venkatramani, N. and Verma, R. L., Laser and Plasma Technology Division Annual Report, BARC/1994/P/004, 1993.
- Deshpande, S. and Kaw, P., Fusion research programme in India. Sadhana, 2013, 38, 839–848.
- Gupta, P. D., Laser applications in Indian nuclear program. Energy Procedia, 2011, 7, 560–576.
- Upadhyaya, B. N. et al., Development of in-situ laser cutting technique for high pressure feeder coupling studs in pressurized heavy water reactors. In National Laser Symposium-2006 (NLS-06), RRCAT, Indore, 5–8 December 2006.
- Paul, B. et al., Development of pulsed Nd : YAG laser system for welding of Iodine brachytherapy sources. In 27th DAE-BRNS National Laser Symposium (NLS-27), RRCAT, Indore, 2018.
- Kumar, J., Singh, G., Saxena, M. K., Prakash, O., Dixit, S. K. and Nakhe, S. V., Development and studies on FBG temperature sensor for applications in nuclear fuel cycle facilities. IEEE Sensing J., 2021, 21, 7613–7619.
- Rai, A. K. et al., Development of thick SiC coating on thin wall tube of zircaloy-4 using laser based directed energy deposition technique. Surf. Coat. Technol., 2020, 398, 126088.
- Paul, C. P., Jinoop, A. N., Kumar, A. and Bindra, K. S., Laser-based metal additive manufacturing: technology, global scenario and our experiences. Trans. Indian Natl. Acad. Eng., 2021, 6, 895–908.
- Saha, T. K., Mass spectrometry activity at Technical Physics Division, BARC: an insight. In Proceedings of the 31st ISMAS Symposium on Mass Spectrometry, 2017, ISBN 81-88513-78-4.
- Indian Environmental Radiation Monitoring Network (IERMON), Department of Atomic Energy; https://dae.gov.in/node/304
- Yadav, K. K., Status update of the MACE gamma-ray telescope. In 37th International Cosmic Ray Conference (ICRC 2021), 12–23 July 2021 (Online), Berlin, Germany (arXiv:2107.04297v1 [astro-ph.IM] 9 Jul 2021).
- https://www.ligo-india.in/ (accessed on 20 February 2022).
Abstract Views: 315
PDF Views: 128