Refine your search
Collections
Co-Authors
Journals
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Rajesh, R.
- Dual Transmitter–Receiver Electromagnetic System for Lateral Boundary Detection of Subsurface Formations
Abstract Views :189 |
PDF Views:62
Authors
R. Rajesh
1,
V. S. Sarma
1
Affiliations
1 CSIR-National Geophysical Research Institute, Uppal Road, Hyderabad 500 007, IN
1 CSIR-National Geophysical Research Institute, Uppal Road, Hyderabad 500 007, IN
Source
Current Science, Vol 114, No 08 (2018), Pagination: 1747-1751Abstract
A new frequency domain electromagnetic system, based on different working principle has been designed and its efficacy tested over the existing systems through laboratory-scale-model studies. In this system, two transmitter coils have been employed to generate a magnetic null plane at their geometric centre. The receiver coil is placed in the null plane to record the induced secondary field. The interaction of the primary field is almost negligible on the secondary field recorded by the receiver. We present the theory and physical model results describing the system parameters and efficacy. The testing through physical model studies suggests an increased depth of detection in this new configuration compared to the existing systems. In terms of secondary field, the strength of the anomaly reflects the magnetic permeability/susceptibility difference of the subsurface medium on either side of the receiver. The study concludes that there is significant increase in depth of investigation and secondary field strength in this system over the existing conventional frequency domain systems and also more robust for boundary detection.Keywords
Conducting Bodies, Electromagnetic System, Magnetic Permeability, Physical Model Studies, Susceptibility.References
- Huang, H. and Won, I., Conductivity and susceptibility mapping using broadband electromagnetic sensors. J. Environ. Eng. Geo-phys., 2000, 5(4), 31–41.
- Spies, B. R., Depth of exploration in electromagnetic sounding methods. Geophysics, 1989, 54, 872–888.
- Huang, H., Depth of investigation for small broadband electromagnetic sensors. Geophysics, 2005, 70(6), G135–G142.
- Singh, N. P. and Mogi, T., Effective skin depth of EM fields due to large circular loop and electric dipole sources. Earth Planets Space, 2003, 55, 301–313.
- Duckworth, K. and Krebes, E. S., Depth sounding by means of a co-incident coil frequency domain electromagnetic system. Geophysics, 1998, 62, 49–55.
- Gupta, O., Rao, S. and Joshi, M., Moving source dipole electromagnetic exploration device for deeper and poorer conductors and a method of detecting such conductors, US Patent, 2004; https://www.google.com/patents/US20040000919
- Nageswararao, S. and Gupta, O. P., An electromagnetic moving source system for detection of subsurface mineralized zones. Curr. Sci., 2007, 92(1), 110–113.
- Improvement on the Characteristics of Transformer Oil using Nanofluids
Abstract Views :220 |
PDF Views:93
Authors
S. Sumathi
1,
R. Rajesh
2
Affiliations
1 Department of Electrical and Electronics Engineering, Anna University, Regional Campus, Coimbatore 641 046, IN
2 Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, IN
1 Department of Electrical and Electronics Engineering, Anna University, Regional Campus, Coimbatore 641 046, IN
2 Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, IN
Source
Current Science, Vol 118, No 1 (2020), Pagination: 29-33Abstract
Transformers play an important role in transmission and distribution systems. Even to this day, 75% of high-voltage transformer failure is the outcome of improper dielectric insulation. The reliable operation and ageing characteristics of the transformers mainly depend on the insulation material. Mineral oil has been used as an insulation and coolant for almost a century in power transformers. Due to the development of extra high voltage and to cope with the increasing demand in voltage level, a nanofluids-based transformer oil is proposed here. In this work, nanoparticles such as aluminium oxide, molybdenum disulphide and titanium dioxide are used with transformer oil to analyse the various critical characteristics like dielectric strength, acidity, interfacial tension, viscosity, flash point and fire point of the power transformer. The observed results show that the proposed nanofluids-based transformer oil provides better performance than the normal transformer oil.References
- Liu, M. S., Lin, M. C. C., Huang, I. T. and Wang, C. C., Chem. Eng. Technol., 2006, 29(1), 72–77.
- Jin, H., Andritsch, T., Tsekmes, I. A., Kochetov, R., Morshuis, P. H. F. and Smit, J. J., IEEE Trans. Dielect. Electr. Insul., 2014, 21(3), 1100–1108.
- Thabet, A., Allam, M. and Shaaban, S. A., IET Gener., Transm. Distrib., 2017, 12(5), 1171–1176.
- Oommen, T. V., Claiborne, C. C. and Mullen, J. T., In Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, Rosemont, IL, USA, 1997, pp. 465–468.
- Bartley, W. H., In Proceedings of the Weidmann-ACTI 5th Annual Technical Conference on New Diagnostic Concepts for Better Asset Management, Albuquerque, NM, USA, November 2006, pp. 1–7.
- Okabe, S., Kaneko, S., Kohtoh, M. and Amimoto, T., IEEE Trans. Dielectr. Electr. Insul., 2010, 17(1), 302–311.
- Choi, S. U. S., In The Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition, San Francisco, USA, ASME, FED 231/MD 66, 1995, pp. 99–105.
- Joshil, A. and Kumar, S., NDT&E Inter., 2005, 38, 459–461.
- Rafiq, M., Lv, Y. Z., Zhou, Y., Ma, K. B., Wang, W., Li, C. R. and Wang, Q., Renew. Sust. Energy Rev., 2015, 52, 308–324.
- Das, S. K., Choi, S., Yu, W. and Pradeep, T., Nanofluids: Science and Technology, John Wiley, 2008, vol. 21, pp. 5–8.
- Jama, M., Singh, T., Gamaleldin, S. M., Koc, M., Samara, A., Isaifan, R. J. and Atieh, M. A., J. Nanomater., 2016, 1, 1–23.
- Yu, W. and Xie, H., J. Nanomater., 2012, 5, 17.
- Das, S. K., Choi, S. U. and Patel, H. E., Heat Transfer Eng., 2006, 27(10), 3–19.
- Segal, V., Hjorstberg, A., Rabinovich, A., Nattrass, D. and Raj, K., IEEE International Symposium on Electrical Insulation, Arlington, VA, USA, 1998, pp. 619–622.
- Okabe, S., Kaneko, S., Kohtoh, M. and Amimoto, T., IEEE Trans. Dielectr. Electr. Insul., 2010, 17(1), 302–311.
- Sumathi, S. and Subburaj, P., Asian J. Res. Soc. Sci. Hum., 2017, 7(2), 678–690.
- Lee, J. C., Seo, H. S. and Kim, Y. J., Int. J. Therm. Sci., 2012, 62, 29–33.
- Du, B., Li, J., Wang, F., Yao, W. and Yao, S., J. Nanomater., 2015, 4, 1–9.
- Segal, V., Rabinovich, A., Nattrass, D., Raj, K. and Nunes, A., J. Magn. Magn. Mater., 2000, 215, 513–515.
- Kopcansky, P., Tomco, L., Marton, K., Koneracka, M., Potocova, I. and Timko, M., J. Magn. Magn. Mater., 2004, 276, 2377–2378.
- Chiesa, M. and Das, S. K., Colloids Surf. A, 2009, 335, 88–97.
- Pfaff, G. and Reynders, P., Chem. Rev., 1999, 99, 1963–1981.
- Yeh, Y. C., Tseng, T. T. and Chang, D. A., J. Am. Ceram. Soc., 1989, 72, 1472–1475.
- Awati, P. S., Awate, S. V., Shah, P. P. and Ramaswamy, V., Catal. Commun., 2003, 4, 393–400.
- Moafi, H. F., Shojaie, A. F. and Zanjanchi, M. A., Appl. Surf. Sci., 2010, 256, 4310–4316.
- Tsevis, A., Spanos, N., Koutsoukos, P. G., Linde, A. J. and Lykleme, J., J. Chem. Soc., Faraday Trans., 1998, 94, 295–300.
- Shojaie, A. F. and Loghmani, M. H., Chem. Eng. J., 2010, 157, 263–269.
- Pourabbas, B. and Jamshidi, B., Chem. Eng. J., 2008, 138(1–3), 55–62.
- Cotton, A. F., Wilkinson, G., Bochmann, M. and Murillo, C. A., Advanced Inorganic Chemistry, John Wiley, USA, 1999.
- Choudhary, R., Khurana, D., Kumar, A. and Subudhi, S., J. Exp. Nanosci., 2017, 12(1), 140–151.
- Yu, W. and Xie, H., J. Nanomater., 2012, 4, 1–17.
- Wang, X.-Q. and Mujumdar, A. S., Braz. J. Chem. Eng., 2008, 25(4), 631–648.
- Chiesa, M. and Das, S. K., J. Colloids Surf. A, 2009, 335, 1–3.
- Martin, D. and Wang, Z. D., IEEE Trans. Dielectr. Electr. Insul., 2008, 15(4), 1044–1050.
- Dissado, La. and Fothergill, J. C., IEEE Trans. Dielectr. Electr. Insul., 2004, 11(5), 737–738.
- Timko, M. and Marton, K., Czech. J. Phys., 2004, 54, 654–657.
- Timko, M., Herchl, F. and Marton, K., In Proceedings of the CSMAG’07 Conference, 2008, vol. 113, no. 1, pp. 569–572.
- Kopcanský, P., Tomco, L., Marton, K., Koneracka, M., Potocova, I. and Timko, M., J. Magn. Magn. Mater., 2004, 272, 2377–2378.
- Segal, V., Hjortsberg, A., Rabinovich, A., Nattrass, D. and Raj, K., In Conference Record of the 1998 IEEE International Symposium on Electrical Insulation (Cat. No. 98CH36239), 1998, vol. 2, pp. 619–622.
- IEC 156, Insulating Liquids – Determination of the Breakdown Voltage at Power Frequency – Test Method, 1995, 2nd edn.
- Wadhwa, C. L., High Voltage Engineering, New Age International, 2007.
- Du, Y. F., Lv, Y. Z., Wang, F. C., Li, X. X. and Li, C. R., In Electrical Insulation (ISEI), Conference Record of the 2010 IEEE International Symposium, San Diego, CA, USA, 2010, pp. 1–3.
- Fallah-Shojaie, A., Tavakoli, A., Ghomashpasand, M. and Hoseinzadeh, S., In 21st Iranian Conference on Electrical Engineering, ICEE, 2013.
- Pugazhendhi, S. C., In International Conference on High Voltage Engineering and Application, Shanghai, China, 2012, vol. 9, pp. 207–210.
- Chandini, G. and Karthik, R., In International Conference on Circuits, Power and Computing Technologies, Nagercoil, India, ICCPCT, 2014, pp. 370–376.
- ASTM D974. Standard test method for determining acidity of oil.
- ASTM D971. Standard test method for determining inferential tension of oil.
- ASTM D93. Standard test method for determining flash point of oil.
- Kumar, T. A., Pradyumna, G. and Jahar, S., J. Environ. Res. Dev., 2012, 7, 768–777.
- IS 1448 (P-25):1976. Standard for measuring viscosity of oil.
- Al2O3-coated Fe3O4/graphene/TiO2 Hybrid Nanocomposite Mixture as Anode Material for Lithium-ion Batteries
Abstract Views :213 |
PDF Views:88
Authors
Affiliations
1 Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, IN
2 Department of Biomedical Engineering, Karunya Institute of Technology, Coimbatore 641 114, IN
3 Department of Engineering Design, Indian Institute of Technology Madras, Chennai 600 036, IN
1 Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, IN
2 Department of Biomedical Engineering, Karunya Institute of Technology, Coimbatore 641 114, IN
3 Department of Engineering Design, Indian Institute of Technology Madras, Chennai 600 036, IN
Source
Current Science, Vol 123, No 2 (2022), Pagination: 177-183Abstract
Lithium-ion batteries are efficient energy storage devices in electric vehicles (EVs). Graphite is used in these batteries as an anode material because of its high stability and good conductivity. However, the need for stability, safety and reversibility is increasing rapidly in commercial EVs. In this study, a Fe<sub>3</sub>O<sub>4</sub>/TiO<sub>2</sub>/gra-phene hybrid nanocomposite coated with Al<sub>2</sub>O<sub>3</sub> has been developed using the microwave-assisted hydro-thermal process with graphite as the anode material for lithium-ion batteries. This combination of nano-materials increases the stability of the anode, electrical conductivity and electrochemical performance. The Fe<sub>3</sub>O<sub>4</sub>/graphene/TiO<sub>2</sub> nanocomposite results in a rever-sible capacity of 920 mAh g–1 after analysing it in 160 cycles at a current density of 100 mAh g–1. The nano-composite provides excellent long-term cycle stability of 650 mAh g–1 after 160 cycles. This shows an ultra-high rate capability of 475 mAh g–1 at 150°C. The gra-phene and Fe<sub>3</sub>O<sub>4</sub>/graphene/TiO<sub>2</sub>hybrid nanocomposite mixture coated with Al<sub>2</sub>O<sub>3</sub> exhibits good nonlinear cumulative effects, stability, high reversibility, and in-creased ultrahigh rate capability.Keywords
Electric Vehicles, Graphite Anode, Hybrid Nanocomposite, Lithium-ion Batteries, Microwave-assisted Hydrothermal ProcessReferences
- Zheng, M., Li, L., Gu, P., Lin, Z., Xue, H. and Pang, H., A glassy carbon electrode modified with ordered nanoporous Co3O4 for non-enzymatic sensing of glucose. Microchim. Acta, 2017, 184(3), 943–949.
- Wang, X., Wei, X. and Dai, H., Estimation of state of health of lith-ium-ion batteries based on charge transfer resistance considering different temperature and state of charge. J. Energy Storage, 2019, 21, 618–631.
- Zhang, J. et al., MOF-derived transition metal oxide encapsulated in carbon layer as stable lithium-ion battery anodes. J. Alloys Compd., 2019, 797, 83–91.
- Shen, L., Che, Q., Li, H. and Zhang, X., Mesoporous NiCO2O4 nanowire arrays grown on carbon textiles as binder-free flexible electrodes for energy storage. Adv. Funct. Mater., 2014, 24(18), 2630–2637.
- Yuan, Y. F. et al., NiCO2S4 multi-shelled hollow polyhedrons as high-performance anode materials for lithium-ion batteries. Electrochim. Acta, 2019, 299, 289–297.
- Han, J., Fu, Q., Xi, B., Ni, X., Yan, C., Feng, J. and Xiong, S., Loading Fe3O4 nanoparticles on paper-derived carbon scaffold toward advanced lithium–sulfur batteries. J. Energy Chem., 2021, 52, 1–11.
- Ma, J. and Liu, C., Turning waste into treasure: reuse of contami-nant-laden adsorbents (Cr(vi)-Fe3O4/C) as anodes with high potas-sium-storage capacity. J. Colloid Interface Sci., 2021, 582, 1107–1115.
- Shen, H., Xia, X., Yan, S., Jiao, X., Sun, D., Lei, W. and Hao, Q., SnO2/NiFe2O4/graphene nanocomposites as anode materials for lithium ion batteries. J. Alloys Compd., 2021, 853, 157017.
- Liu, Z. et al., Sandwich shelled TiO2@Co3O4@Co3O4/C hollow spheres as anode materials for lithium ion batteries. Chem. Com-mun., 2021, 57(14), 1786–1789.
- Kumar, A., Hussain, I., Kumar, S. and Koo, B. H., Structural, opti-cal properties and the origin of spin functionality in the Co modified TiO2 nanoparticles. Vacuum, 2021, 183, 109870.
- Friesen, A. et al., Al2O3 coating on anode surface in lithium ion batteries: impact on low temperature cycling and safety behavior. J. Power Sources, 2017, 363, 70–77.
- Zhang, G., Li, X., Liu, H. and Wei, D., Engineering capacitive contribution in dual carbon-confined Fe3O4 nanoparticle enabling superior Li+ storage capability. J. Mater. Sci., 2021, 56(8), 5100–5112.
- Li, S., Wang, M., Luo, Y. and Huang, J., Bio-inspired hierarchical nanofibrous Fe3O4–TiO2–carbon composite as a high-performance anode material for lithium-ion batteries. ACS Appl. Mater. Inter-faces, 2016, 8(27), 17343–17351.
- Al-Hazmi, F. S., Al-Harbi, G. H., Beall, G. W., Al-Ghamdi, A. A., Obaid, A. Y. and Mahmoud, W. E., One pot synthesis of graphenebased on microwave assisted solvothermal technique. Synth. Met., 2015, 200, 54–57.
- Lu, J., Deng, C., Zhang, X. and Yang, P., Synthesis of Fe3O4/ graphene/TiO2 composites for the highly selective enrichment of phosphopeptides from biological samples. ACS Appl. Mater. Inter-faces, 2013, 5(15), 7330–7334.
- Friesen, A. et al., Al2O3 coating on anode surface in lithium-ion batteries: impact on low temperature cycling and safety behavior. J. Power Sources, 2017, 363, 70–77.
- Jorio, A. and Saito, R., Raman spectroscopy for carbon nanotube applications. J. Appl. Phys., 2021, 129(2), 021102.
- González-Gómez, M. A. et al., Development of superparamagnetic nanoparticles coated with polyacrylic acid and aluminum hydroxide as an efficient contrast agent for multimodal imaging. Nanomateri-als, 2019, 9(11), 1626.
- Nguyen, K. D. V. and Vo, K. D. N., Magnetite nanoparticles–TiO2 nanoparticles–graphene oxide nanocomposite: synthesis, characterization and photocatalytic degradation for rhodamine-B dye. AIMS Mater. Sci., 2020, 7(3), 288–301.
- Wang, W., Xiao, K., Zhu, L., Yin, Y. and Wang, Z., Graphene oxide supported titanium dioxide and ferroferric oxide hybrid, a magnetically separable photocatalyst with enhanced photocatalytic activity for tetracycline hydrochloride degradation. RSC Adv., 2017, 7(34), 21287–21297.
- Tang, S. et al., Fe3O4 nanoparticles three-dimensional electro-peroxydisulfate for improving tetracycline degradation. Chemosphere, 2021, 268, 129315.
- Cañón, J. and Teplyakov, A. V., XPS characterization of cobalt impregnated SiO2 and γ-Al2O3. Surf. Interface Anal., 2021, 53(5), 475–481.
- Zhu, H., Shiraz, M. H. A., Liu, L., Hu, Y. and Liu, J., A facile and low-cost Al2O3 coating as an artificial solid electrolyte interphase layer on graphite/silicon composites for lithium-ion batteries. Nano-technology, 2021, 32(14), 144001.
- Sumathi, S., Rajesh, R. and Subburaj, P., Investigation of dielectric strength of transformer oil based on hybrid TiO2/Al2O3/MoS2nanofluid using Taguchi and response surface methodology. IETE J. Res., 2019, 1–9.
- Rajesh, R. and Sumathi, S., Certain performance investigation on hybrid TiO2/Al2O3/MoS2 nanofiller coated 3∅ induction motor: a Taguchi and RSM based approach. Energy Rep., 2020, 6, 1638– 1647.
- Jing, L., Fu, A., Li, H., Liu, J., Guo, P., Wang, Y. and Zhao, X. S., One-step solvothermal preparation of Fe3O4/graphene composites at elevated temperature and their application as anode materials for lithium-ion batteries. RSC Adv., 2014, 4(104), 59981–59989.
- Gao, G. et al., PEG-200-assisted hydrothermal method for the con-trolled-synthesis of highly dispersed hollow Fe3O4 nanoparticles. J. Alloys Compd, 2013, 574, 340–344.