Artificial Intelligent Systems and Machine Learning

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

System Identification of Hydrodynamic Journal Bearings Using Oil Film Pressure Measurement


Affiliations
1 Mechanical Engineering Department, Padmashri Dr. Vithalrao Vikhe Patil College of Engineering, Affiliated to Pune University, Ahmednagar, Maharashtra, India
2 Adsul Technical Campus (Pune University), Ahmednagar, Maharashtra, India
3 Chemical Engineering Dept., University Dept. of Chemical Technology (UDCT), North Maharashtra University, Jalgaon, Maharashtra, India
     

   Subscribe/Renew Journal


In this study the system identification method is applied to obtain mathematical model in form of transfer function and step response for a hydrodynamic journal bearings using fluid film pressure measurement. System identification needs set of measured inputs and output signals to create mathematical models. In present research experimental values of speed and load are taken as input parameters and fluid film pressure is taken as output parameter. In order to do the stability analysis of fluid film bearing it is necessary to predict the behavior of fluid film bearing at different operating conditions which is possible by using system identification in Matlab and further simulation to find transfer function and step response. Proposed work shows good agreement between simulated results and experimental data.

Keywords

System Identification, Hydrodynamic Journal Bearing Modeling, Transfer Function, Pressure Distribution.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 235

PDF Views: 4




  • System Identification of Hydrodynamic Journal Bearings Using Oil Film Pressure Measurement

Abstract Views: 235  |  PDF Views: 4

Authors

Ravindra R. Navthar
Mechanical Engineering Department, Padmashri Dr. Vithalrao Vikhe Patil College of Engineering, Affiliated to Pune University, Ahmednagar, Maharashtra, India
N. V. Halegowda
Adsul Technical Campus (Pune University), Ahmednagar, Maharashtra, India
V. S. Patil
Chemical Engineering Dept., University Dept. of Chemical Technology (UDCT), North Maharashtra University, Jalgaon, Maharashtra, India

Abstract


In this study the system identification method is applied to obtain mathematical model in form of transfer function and step response for a hydrodynamic journal bearings using fluid film pressure measurement. System identification needs set of measured inputs and output signals to create mathematical models. In present research experimental values of speed and load are taken as input parameters and fluid film pressure is taken as output parameter. In order to do the stability analysis of fluid film bearing it is necessary to predict the behavior of fluid film bearing at different operating conditions which is possible by using system identification in Matlab and further simulation to find transfer function and step response. Proposed work shows good agreement between simulated results and experimental data.

Keywords


System Identification, Hydrodynamic Journal Bearing Modeling, Transfer Function, Pressure Distribution.