Digital Signal Processing

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

A Reduced Complexity of LDPC Decoder Architecture for IEEE 802.11n/ac Application


Affiliations
1 Department of Electronics and Communication Engineering, Sri Eshwar College of Engineering, Coimbatore, India
     

   Subscribe/Renew Journal


This paper presents a method of communication to safeguard the data and information communicated between the transmitter and receiver. Channel codes that can detect and correct the errors occurred during the transmission through a communication channel. Channel coding minimizes the effect of channel noise by using a channel encoder and decoder at the transmitter and receiver. The channel encoder encodes the message bits by adding redundant bits to generate each codeword based on word mechanism by splitting each codeword into 8 bits. Here, the channel decoder in the receiver exploits the redundant bits in the received codeword by 8 bits and retrieves the original message. The designed is based on single-key and multiple-key encryption / decryption. Here, quad word size 64-bit of message length is accepted for single transition. The process takes lesser time, even if the message size exceeded up-to 1000 characters with high security. Low-density parity-check codes have been adopted for 10 Gb/s ethernet (IEEE 803.3an), Wifi (IEEE 802.11n) and WiMAX (IEEE 802.16e) wireless LAN standards and are being considered for a range of application areas, from optical networks to digital storage.

[1]   R. G. Gallager, Low-Density Parity-Check Codes. The MIT Press, Sep. 1963.

[2]   D. MacKay, “Good error-correcting codes based on very sparse matrices,” Information Theory, IEEE Transactions on, 1999.

[3]   I. Djordjevic, M. Cvijetic, L. Xu, and T. Wang, “Using LDPC-Coded modulation and coherent detection for ultra highspeed optical transmission,” Lightwave Technology, 2007.

[4]   Y. Miyata, K. Sugihara, W. Matsumoto, K. Onohara, T. Sugihara, K. Kubo, H. Yoshida, and

[5]   T. Mizuochi, “A triple-concatenated FEC using soft-decision decoding for 100 Gb/s optical transmission,” in Optical Fiber Communication (OFC).

[6]   Y. Chen and D. Hocevar, “A FPGA and ASIC implementation of rate 1/2, 8088-b irregular low density parity check decoder,” in Global Telecommunications Conference, 2003.

[7]   GLOBECOM ’03. IEEE.


User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 223

PDF Views: 1




  • A Reduced Complexity of LDPC Decoder Architecture for IEEE 802.11n/ac Application

Abstract Views: 223  |  PDF Views: 1

Authors

G. Malarvizhi
Department of Electronics and Communication Engineering, Sri Eshwar College of Engineering, Coimbatore, India
M. Nivetha
Department of Electronics and Communication Engineering, Sri Eshwar College of Engineering, Coimbatore, India
M. Parveen
Department of Electronics and Communication Engineering, Sri Eshwar College of Engineering, Coimbatore, India
G. Renuga Devi
Department of Electronics and Communication Engineering, Sri Eshwar College of Engineering, Coimbatore, India

Abstract


This paper presents a method of communication to safeguard the data and information communicated between the transmitter and receiver. Channel codes that can detect and correct the errors occurred during the transmission through a communication channel. Channel coding minimizes the effect of channel noise by using a channel encoder and decoder at the transmitter and receiver. The channel encoder encodes the message bits by adding redundant bits to generate each codeword based on word mechanism by splitting each codeword into 8 bits. Here, the channel decoder in the receiver exploits the redundant bits in the received codeword by 8 bits and retrieves the original message. The designed is based on single-key and multiple-key encryption / decryption. Here, quad word size 64-bit of message length is accepted for single transition. The process takes lesser time, even if the message size exceeded up-to 1000 characters with high security. Low-density parity-check codes have been adopted for 10 Gb/s ethernet (IEEE 803.3an), Wifi (IEEE 802.11n) and WiMAX (IEEE 802.16e) wireless LAN standards and are being considered for a range of application areas, from optical networks to digital storage.

[1]   R. G. Gallager, Low-Density Parity-Check Codes. The MIT Press, Sep. 1963.

[2]   D. MacKay, “Good error-correcting codes based on very sparse matrices,” Information Theory, IEEE Transactions on, 1999.

[3]   I. Djordjevic, M. Cvijetic, L. Xu, and T. Wang, “Using LDPC-Coded modulation and coherent detection for ultra highspeed optical transmission,” Lightwave Technology, 2007.

[4]   Y. Miyata, K. Sugihara, W. Matsumoto, K. Onohara, T. Sugihara, K. Kubo, H. Yoshida, and

[5]   T. Mizuochi, “A triple-concatenated FEC using soft-decision decoding for 100 Gb/s optical transmission,” in Optical Fiber Communication (OFC).

[6]   Y. Chen and D. Hocevar, “A FPGA and ASIC implementation of rate 1/2, 8088-b irregular low density parity check decoder,” in Global Telecommunications Conference, 2003.

[7]   GLOBECOM ’03. IEEE.