AIRCC's International Journal of Computer Science and Information Technology

Open Access Open Access  Restricted Access Subscription Access

Design and Optimization a Circular Shape Network Antenna Micro Strip for some Application


Affiliations
1 National Engineering School of Tunis, University Tunis El Manar, Tunis, Tunisia
 

To meet the demands of high speed required by mobile communication of past generations ,one solution is to increase the number of antennas to the show and the reception of the wireless link this is called MIMO (Multiple input ,Multiple output )technology .however ,the integration of multiple antennas on the same PCB is delicate because of the small volume that require some applications and electromagnetic antenna between the coupling ,phenomena that we cannot neglect them .indeed a strong isolation between them has been reached to reduce fading of the signal caused by the electromagnetic antenna reached to reduce fading of the signal caused by the electromagnetic coupling and maximize the overall gain in this article we are interested then integration on the same printed circuit of eight antennas MIMO are not operation in the same frequency band .the first antenna of this last work at 2.4GHz .other antennas have resonance frequency folling each with 20MHz offset this device is characterized by its original form that keeps is highly isolated antennas from the point of view electromagnetic coupling.

Keywords

MIMO, Technology Micro-Strip, Microwave, Network Antenna.
User
Notifications
Font Size

  • Design”, Third Edition, John Wiley & Sons, Inc. [2] Ramesh garg, PrakashBhartia, InderBahl andApisakIttipiboon,Microtrip Design Antenna Handbook”, Artech House, Boston London.

  • Kin-Lu Wong, “Compact and Broadband Microstrip Antennas”, John Wiley & Sons, Inc.

  • A.Al-Zoubi, F. Yang, and A. Kishk, “A broadband center-fed circular patch-ring antenna with a monopole like radiation pattern,” IEEE Transaction Antennas Propagation, vol. 57, pp. 789–792, 2009.

  • Prasanna L. Zade,SachinS.Khade, Dr. N. K. Choudhary, “Modeling and Designing of Circular Microstrip Antenna For wireless communication”, International Conference on Emerging Trends in Engineering and Technology, ICETET- 2009.

  • Arun Singh Kirar, Veerendra Singh Jadaun, Pavan KumarSharma, “Design a Circular Microstrip Patch Antenna for Dual Band”, International Journal of Electronics Communication and Computer Technology (IJECCT) Volume 3 Issue 2 March 2013.

  • V.Harsha Ram Keerthi, Dr.Habibullah Khan, Dr.P.Srinivasulu, “Design of C-Band Microstrip Patch Antenna for Radar Applications Using IE3D”, Journal of Electronics and Communication Engineering, 2013.

  • M.Venkata,Narayana, Govardhani.Immadi, K.Rajkamal, M.S.R.S Tejaswi, “Microstrip Patch Antenna for C-band RADAR

  • Applications with Coaxial fed”, International Journal of Engineering Research and Applications, Vol.2, I

  • Jack H. Winters, ‘’On the Capacity of Radio Communication Systems with Diversity in a, Rayleigh Fading Environment’’, lEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL.SAC-5, NO. 5, JUNE 1987, p871

  • Jack H. Winters, ‘’The Diversity Gain of Transmit Diversity in Wireless Systems with Rayleigh Fading’’, IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 47, NO. 1, FEBRUARY 1998, p119


Abstract Views: 372

PDF Views: 160




  • Design and Optimization a Circular Shape Network Antenna Micro Strip for some Application

Abstract Views: 372  |  PDF Views: 160

Authors

Louati Siwar
National Engineering School of Tunis, University Tunis El Manar, Tunis, Tunisia
Fethi Mejri
National Engineering School of Tunis, University Tunis El Manar, Tunis, Tunisia
Aguili Taoufik
National Engineering School of Tunis, University Tunis El Manar, Tunis, Tunisia

Abstract


To meet the demands of high speed required by mobile communication of past generations ,one solution is to increase the number of antennas to the show and the reception of the wireless link this is called MIMO (Multiple input ,Multiple output )technology .however ,the integration of multiple antennas on the same PCB is delicate because of the small volume that require some applications and electromagnetic antenna between the coupling ,phenomena that we cannot neglect them .indeed a strong isolation between them has been reached to reduce fading of the signal caused by the electromagnetic antenna reached to reduce fading of the signal caused by the electromagnetic coupling and maximize the overall gain in this article we are interested then integration on the same printed circuit of eight antennas MIMO are not operation in the same frequency band .the first antenna of this last work at 2.4GHz .other antennas have resonance frequency folling each with 20MHz offset this device is characterized by its original form that keeps is highly isolated antennas from the point of view electromagnetic coupling.

Keywords


MIMO, Technology Micro-Strip, Microwave, Network Antenna.

References