ICTACT Journal on Communication Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Null Synthesis of Scanned Linear Array Antenna with Minimum Side Lobe Level and Fixed Dynamic Range Ratio Using Iterative Fast Fourier Transform


Affiliations
1 Department of Electronics and Communication Engineering, Aryabhatta Institute of Engineering and Management, West Bengal, India
2 Department of Electronics and Communication Engineering, National Institute of Technology, Durgapur, West Bengal, India
3 Department of Electrical Engineering, National Institute of Technology, Rourkela, Orissa, India
     

   Subscribe/Renew Journal


This paper presents a method based on iterative fast fourier technique for placing nulls in prescribed directions by amplitude-only control method in the radiation pattern of scanned linear array of uniformly spaced isotropic antennas with fixed dynamic range ratio of amplitude distribution and minimum peak side lobe level. Two examples have been presented, one with 20 isotropic antennas for placing two nulls and another with 22 isotropic antennas for placing wide null. Dynamic range ratio in both the cases has been fixed at 4.0.The method uses the property that for a linear array with uniform element spacing, an inverse Fourier transform relationship exists between the array factor and the element excitations.

Keywords

Antenna Arrays, Fast Fourier Transform, Null Synthesis, Side Lobe Level, Dynamic Range Ratio.
Subscription Login to verify subscription
User
Notifications
Font Size

Abstract Views: 247

PDF Views: 0




  • Null Synthesis of Scanned Linear Array Antenna with Minimum Side Lobe Level and Fixed Dynamic Range Ratio Using Iterative Fast Fourier Transform

Abstract Views: 247  |  PDF Views: 0

Authors

B. C. Mahato
Department of Electronics and Communication Engineering, Aryabhatta Institute of Engineering and Management, West Bengal, India
G. K. Mahanti
Department of Electronics and Communication Engineering, National Institute of Technology, Durgapur, West Bengal, India
A. K. Panda
Department of Electrical Engineering, National Institute of Technology, Rourkela, Orissa, India

Abstract


This paper presents a method based on iterative fast fourier technique for placing nulls in prescribed directions by amplitude-only control method in the radiation pattern of scanned linear array of uniformly spaced isotropic antennas with fixed dynamic range ratio of amplitude distribution and minimum peak side lobe level. Two examples have been presented, one with 20 isotropic antennas for placing two nulls and another with 22 isotropic antennas for placing wide null. Dynamic range ratio in both the cases has been fixed at 4.0.The method uses the property that for a linear array with uniform element spacing, an inverse Fourier transform relationship exists between the array factor and the element excitations.

Keywords


Antenna Arrays, Fast Fourier Transform, Null Synthesis, Side Lobe Level, Dynamic Range Ratio.