ICTACT Journal on Communication Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Performance Analysis of Rectangular MPA Using Different Substrate Materials for WLAN Application


Affiliations
1 Department of Electronics and Communication Engineering, Rajiv Gandhi College of Engineering and Technology, India
2 Department of Electronics and Communication Engineering, SRM University, India
     

   Subscribe/Renew Journal


In this paper, a rectangular microstrip patch antenna (MPA) is designed using different substrate materials for analyzing the performance of the MPA. Alumina (Al2O3), Bakelite, Beryllium oxide (BeO), Gallium Arsenide (GaAs), RT-Duroid and Flame Retardant 4 (FR-4) are the six different substrate used in the design. The size of the rectangular microstrip patch antenna varies according to the dielectric constant of substrate materials used. The operating frequency taken for this analysis is 5.8 GHz. The proposed design provides the study on the performance of rectangular microstrip patch antenna for different substrate materials using the same frequency. This study conveys that which substrate material provides better performance. Moreover, this comparative study conveys that which substrate material provides better performance. The simulation parameters are investigated using HFSS.

Keywords

Rectangular Microstrip Patch, Substrate Materials, Al2O3, Bakelite, BeO, GaAs, RT-Duroid and FR-4 and HFSS.
Subscription Login to verify subscription
User
Notifications
Font Size

  • Constantine A. Balanis, “Antenna Theory Analysis and Design”, 3rd Edition, Wiley, 2015.

  • T. Jayachitra, V.K. Pandey and Anshuman Singh, “Design of Microstrip Patch Antenna for WLAN Applications”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 3, No. 3, pp. 17-22, 2014.

  • Sant Sharan Shukla, Rahul Kumar Verma and Gurpreet Singh Gohir, “Investigation of the effect of Substrate material on the performance of Microstrip antenna”, Proceedings of 4th International Conference on Reliability, Infocom Technologies and Optimization, pp. 1-3, 2015.

  • Amba Srivastava and Nandita Pradhan, “Analysis of Different Substrate Material and Frequency on Microstrip Patch Antenna”, International Journal of Electronics, Electrical and Computational System, Vol. 6, No. 2, pp. 58-64, 2017.

  • Gurpreet Kaur and Sonia Goyal, “To Study the Effect of Substrate Material for Microstrip Patch Antenna”, International Journal of Engineering Trends and Technology, Vol. 36, No. 9, pp. 490-493, 2016.

  • Sagar D. Mahamine, Rahul S. Parbat, Shekhar H. Bodake and Mahesh P. Aher, “Effects of Different Substrates on Rectangular Microstrip Patch Antenna for S-band”, International Conference on Automatic Control and Dynamic Optimization Techniques, pp. 1146-1145, 2016.

  • Saad Hassan Kiani, Khalid Mahmood, Umar Farooq Khattak, Burhan-Ud-Din and Mehre Munir, “U Patch Antenna using Variable Substrates for Wireless Communication Systems”, International Journal of Advanced Computer Science and Applications, Vol. 7, No. 12, pp. 286-291, 2016.

  • Munira Bano, A.K. Rastogi and Shanu Sharma, “Design and Simulation of Microstrip Patch Antenna using Different Substrates”, International Journal of Advanced Research in Computer Engineering and Technology, Vol. 3, No. 11, pp. 3871-3875, 2014.

  • Trupti Ingale, Chaitali Ingale, A.A. Trikolikar, Gunjan Rathore and P.C. Latane, “Effect of Different Substrate Material on Performance of H Shaped Patch Antenna”, International Journal of Innovative Research in Computer and Communication Engineering, Vol. 2, No. 11, pp. 1-2, 2014.

  • Kolli Venkatrao and S.S. Mohan Reddy, “Design and Performance Analysis of Microstrip Patch Antenna using Different Dielectric Substrates”, International Journal of Electronics and Communication, Vol. 2, No. 11, pp. 26-35, 2014.

  • Tilak Mukherjee, P. Venkat Rao, M.V.L. Bhavani and Abhishek Kumar Sinha, “Microstrip Patch Antenna Characteristics using Different Dielectric Substrates”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 4, No. 5, pp. 3813-3818, 2015.

  • Punita Mane, S.A. Patil and P.C. Dhanawade, “Comparative Study of Microstrip Antenna for Different Subsrtate Material at Different Frequencies”, International Journal of Emerging Engineering Research and Technology, Vol. 2, No. 9, pp. 18-23, 2014.

  • A.A. Qureshi, M.U. Afzal, T. Taqueer and M.A. Tarar, “Performance Analysis of FR-4 Substrate for High Frequency Microstrip Antennas”, Proceedings of China Japan Joint Microwave Conference, 2011.

  • Kiran Jain and Keshav Gupta, “Different Substrates use in Microstrip Patch Antenna-A Survey”, International Journal of Science and Research, Vol. 3, No. 5, pp. 1802-1803, 2014

  • Chidre Sagar Ram and V.M. Dhede, “Gain Improvement Techniques for Rectangular Microstrip Patch Antenna for different Frequencies”, International Journal of Advance Research and Innovative Ideas in Education, Vol. 2, No. 4, pp. 475-480, 2016.

  • Pradeep Kumar Sharma, Ritesh Saraswat and Jitendra Jangir, “Performance Analysis of Square Shaped Microstrip Patch Antenna for S Band Application”, International Journal of Modern Trends in Engineering and Research, Vol. 03, No. 10, pp. 123-127, 2016.

  • R. Prasad Rao, Budumuru Srinu and C. Dharma Raj, “Design and Analysis of Multi Substrate Microstrip Patch Antenna”, Microelectronics, Electromagnetics and Telecommunications, Vol. 372, pp. 733-739, 2015.


Abstract Views: 342

PDF Views: 3




  • Performance Analysis of Rectangular MPA Using Different Substrate Materials for WLAN Application

Abstract Views: 342  |  PDF Views: 3

Authors

E. Aravindraj
Department of Electronics and Communication Engineering, Rajiv Gandhi College of Engineering and Technology, India
K. Ayyappan
Department of Electronics and Communication Engineering, Rajiv Gandhi College of Engineering and Technology, India
R. Kumar
Department of Electronics and Communication Engineering, SRM University, India

Abstract


In this paper, a rectangular microstrip patch antenna (MPA) is designed using different substrate materials for analyzing the performance of the MPA. Alumina (Al2O3), Bakelite, Beryllium oxide (BeO), Gallium Arsenide (GaAs), RT-Duroid and Flame Retardant 4 (FR-4) are the six different substrate used in the design. The size of the rectangular microstrip patch antenna varies according to the dielectric constant of substrate materials used. The operating frequency taken for this analysis is 5.8 GHz. The proposed design provides the study on the performance of rectangular microstrip patch antenna for different substrate materials using the same frequency. This study conveys that which substrate material provides better performance. Moreover, this comparative study conveys that which substrate material provides better performance. The simulation parameters are investigated using HFSS.

Keywords


Rectangular Microstrip Patch, Substrate Materials, Al2O3, Bakelite, BeO, GaAs, RT-Duroid and FR-4 and HFSS.

References