ICTACT Journal on Communication Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Rhombus Shaped Reconfigurable Microstrip Antenna for CDMA Wireless Applications


Affiliations
1 Department of Electronics and Communication Engineering, SDM Institute of Technology, India
     

   Subscribe/Renew Journal


Rhombus Shaped Reconfigurable microstrip antenna is designed to operate at 1.74GHz. The proposed antenna is a Rhombus shaped microstrip antenna which gives a good size reduction with good impedance bandwidth in terms of with and without capacitor. The Designed antenna is expected to reduction in size and increase in Bandwidth. The Simulation is carried out by using IE3D software and practical results are measured by Vector Network analyzer. Comparative analysis has made between with and without capacitor as a lumped element. The size reduction of Rhombus shaped Reconfigurable microstrip antenna with capacitor gives best possible size reduction of 75.95% with overall bandwidth 86MHz. Acceptable agreement is obtained between the simulated and measured antenna performance parameter.

Keywords

Reconfigurable Microstrip Antenna, Wireless Application, Bandwidth, Reduced Size.
Subscription Login to verify subscription
User
Notifications
Font Size

  • H. Wang, X.B. Huang, D.G. Fang and G.B. Han, “A Microstrip Antenna Array Formed by Microstrip Line Fed Tooth-Like-Slot Patches”, IEEE Transactions on Antennas and Propagation, Vol. 55, No. 4, pp. 1210-1214, 2007.

  • Kai Fong Lee and Wei Chen, “Advances in Microstrip and Printed Antennas”, John Wiley, 1997.

  • Jean-Francois Zurcher and Fred E. Gardiol, “Broadband Patch Antennas”, First Edition, Artech House, 1995.

  • Preet Kaur, Asok De and S.K. Aggarwal, “Design of a Novel Reconfigurable Fractal Antenna for Multiband Application”, International Journal of Advanced Science and Technology, Vol. 62, pp. 103-112, 2014.

  • N. Ramli, M.T. Ali, M.T. Islam, A.L. Yusof, S. Muhamud-Kayat and A.A. Azlan, “Design of an Aperture-Coupled Frequency-Reconfigurable Microstrip Stacked Array Antenna for LTE and WiMAX Applications”, ISRN Communications and Networking, Vol. 2014, pp. 1-11, 2014.

  • B.A. Cetiner, G.R. Crusats, L. Jofre and Necmi Biyikli, “RF MEMS Integrated Frequency Reconfigurable Annular Slot Antenna”, IEEE Transactions on Antennas and Propagation, Vol. 58, No. 3, pp. 626-632, 2010.

  • S. Muhamud-Kayat, M.T. Ali, M.K. Mohd Salleh, M.H. Mohd Rusli, N. Ramli and H. Alias, “Truncated Rhombus-Like Slotted Antennas with Aperture Coupling Technique”, Progress in Electromagnetics Research Letters, Vol. 39, pp. 181-198, 2013.

  • J. Perruisseau-Carrier, “Dual-Polarized and Polarization-Flexible Reflective Cells with Dynamic Phase Control”, IEEE Transactions on Antennas and Propagation, Vol. 58, No. 5, pp. 1494-1502, 2010.

  • F. Ferrero, C. Luxey, R. Staraj and G. Jacquemod, “A Novel Quad-Polarization Agile Patch Antenna”, IEEE Transactions on Antennas and Propagation, Vol. 57, No. 5, pp. 1563-1567, 2009.

  • D. Rodrigo, J. Romeu, S. Capdevila and L. Jofre, “A Figure-of-Merit for Pattern Reconfigurable Antennas”, IEEE Transactions on Antennas and Propagation, Vol. 61, No. 3, pp. 1448-1453, 2013.

  • Yan-Ying Bai, Shaoqiu Xiao, Ming-Chun Tang, Zhuo-Fu Ding and Bing-Zhong Wang, “Wide-Angle Scanning Phased Array With Pattern Reconfigurable Elements”, IEEE Transactions on Antennas and Propagation, Vol. 59, No. 11, pp. 4071-4076, 2011.

  • T.A. Denidni and N. Hassaine, “Broadband and High Gain E-Shaped Microstrip Antenna for High-Speed Wireless Networks”, Progress in Electromagnetic Research C, Vol. 1, pp. 105-111, 2008.

  • M.R. Tayfeh Aligodaz, K. Forooraghi and A. Rashidian, “Wideband Miniaturized L-Probe Fed Fractal Clover Leaf Microstrip Patch Antenna”, Proceedings of 13th International Symposium on Antennas, 2004.

  • M. Ali, R. Dougal, G. Yang and H.S. Hwang, “Wideband Circularly Polarized Microstrip Patch Antenna for Wireless LAN Applications”, Proceedings of IEEE Antennas and Propagation Society International Symposium, Vol. 2, pp. 34-37, 2003.


Abstract Views: 324

PDF Views: 2




  • Rhombus Shaped Reconfigurable Microstrip Antenna for CDMA Wireless Applications

Abstract Views: 324  |  PDF Views: 2

Authors

K. Madhusudhana
Department of Electronics and Communication Engineering, SDM Institute of Technology, India
S. Jagadeesha
Department of Electronics and Communication Engineering, SDM Institute of Technology, India

Abstract


Rhombus Shaped Reconfigurable microstrip antenna is designed to operate at 1.74GHz. The proposed antenna is a Rhombus shaped microstrip antenna which gives a good size reduction with good impedance bandwidth in terms of with and without capacitor. The Designed antenna is expected to reduction in size and increase in Bandwidth. The Simulation is carried out by using IE3D software and practical results are measured by Vector Network analyzer. Comparative analysis has made between with and without capacitor as a lumped element. The size reduction of Rhombus shaped Reconfigurable microstrip antenna with capacitor gives best possible size reduction of 75.95% with overall bandwidth 86MHz. Acceptable agreement is obtained between the simulated and measured antenna performance parameter.

Keywords


Reconfigurable Microstrip Antenna, Wireless Application, Bandwidth, Reduced Size.

References