International Journal of Engineering Research

Open Access Open Access  Restricted Access Subscription Access

Application of Ferrite Ductile Iron on a Casting


Affiliations
1 College of Applied Technology, University of Science and Technology, Liaoning, China
 

In this paper, the ferrite ductile iron was used as the research object, the traditional 450-10 material production process of mechanical properties and metallographic test results can not meet the technical requirements of the problem from requirements of component material standards, successful test of ferrite material of castings, stable performance can meet the requirements of metallurgical testing requirements, these have been mass production, and these have obtained good economic benefits.

Keywords

Ferrite Ductile Iron, Carbon Equivalent, Silicon Content, Pouring Temperature.
User
Notifications
Font Size

  • i. Fenghui Wang, Anyuan Jiao. Finite Element Analysis of 35 tons Steel Coil Overturning Machine.Advanced Materials Research 921-924, 299-300 (2011).

  • ii. P.Wiggers, C. Miehe. Contact Constraints within Coupled Thermomechanical Analysis-A Finite Element Model,Computer Methods in Applied Mechanics and Engineering 301-319,113(1999).

  • iii. Zhang De-jian, Ke Zhen-dong.Fracture mechanics analysis of wheeled excavator dipper. Mechanical Research & Application 1:9-11,14(2009).

  • iv. GONG Jin, SONG Minglong,WANG Beizhan. Computer simulation and experiment for excavator ROPS performance. Modern Manufacturing Engineering 3,104-108(2009).

  • v. ong Ying Shangguan, Lian Yang,Di Wu et al. The application of Solid Works in bridge erecting machine's structure design. Advanced Manufacturing Technology 670-674, 1(2012).


Abstract Views: 205

PDF Views: 0




  • Application of Ferrite Ductile Iron on a Casting

Abstract Views: 205  |  PDF Views: 0

Authors

Haibin Qin
College of Applied Technology, University of Science and Technology, Liaoning, China

Abstract


In this paper, the ferrite ductile iron was used as the research object, the traditional 450-10 material production process of mechanical properties and metallographic test results can not meet the technical requirements of the problem from requirements of component material standards, successful test of ferrite material of castings, stable performance can meet the requirements of metallurgical testing requirements, these have been mass production, and these have obtained good economic benefits.

Keywords


Ferrite Ductile Iron, Carbon Equivalent, Silicon Content, Pouring Temperature.

References