International Journal of Engineering Research

Open Access Open Access  Restricted Access Subscription Access

A Procedural Framework to Design and Fabrication Controlled by Pneumatics


Affiliations
1 Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204, India
 

This project deals with design development and fabrication of “MULTI PURPOSE PNEUMATIC MACHINE”. This machine is designed for the purpose of multi-operation i.e. Grinding, punching, and cutting. This machine performs multipurpose operation at same time with required speed and this machine is automatic which is controlled or operated by pneumatic pressure. This model of multi-operational machine may be used in industry and domestic operation which can perform mechanical operation like grinding, punching, and cutting of a thin metallic as well as wooden model or body. A high pressure compressed air is forced on a fan and the fan is made to rotate. This rotation is transmitted to the machining head by a shaft and the required operation is carried out.
User
Notifications
Font Size

  • i. Yang, “Pneumatic Punching Machine” Feb11 2015 CN104339690 A.

  • ii. Pan Lig Steel “Pneumatic Cutting Machine” July 13 2013 CN203076688, Zhejiang Feiferring Wafer Pneumatic Tool Co.Ltd.

  • iii. Wu Zhe “Pneumatic Grinding Machine”, April 16 2014.

  • iv. Markur Augsburg “Chamfering Of Bevel Gear “Mar 21 2013, CN103889628A.

  • v. Schunck Richard,”minimizing gearbox noise inside and otside the box”, Motion System Design.

  • vi. khurmi r s,(2014) “ A textbook of machine design” Eurasia publishing house(p)ltd., New-Delhi, ISBN 9788121925372.

  • vii. Mahadevan k and Reddy k.Balaveera, (2015), “ Design data hand book” cbs publishers and distributors (p) ltd., New-Delhi, ISBN 9788123923154.

  • viii. Adithan, M.; Gupta, A.B.(2002), Manufacturing Technology,New Age International Publisher, ISBN 978-81-224-0817-1.

  • ix. Matthew , Sam.” The basics of abrasive cutting” Retrieved 17 December 2016.

  • x. Todd, Robert H., Dell K. Aleen,And Leo Alting. Manufacturing processes reference guide. New York: Industrial Press inc. 1994.pg 107.

  • xi. Kalpakjian, Serope; Schmid, Steven R (2006).Manufacturing Engineering And Technology (5th edition ed) p.428.

  • xii. Peter Ulintz,Hole Extrusions-part1 metal forming magazine, oct 2011.2017-01-12.

  • xiii. Stephenson, David A; Agapiopu , Jhon S. (1997), metal cutting theory and practice, Markcel Dekker,P.164, ISBN 978-0-8247-9579-5.


Abstract Views: 214

PDF Views: 0




  • A Procedural Framework to Design and Fabrication Controlled by Pneumatics

Abstract Views: 214  |  PDF Views: 0

Authors

A. Aravinth Kumar
Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204, India
V. Balaji
Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204, India
S. Gokul
Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204, India
C. K. Aravinda Narayana
Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204, India

Abstract


This project deals with design development and fabrication of “MULTI PURPOSE PNEUMATIC MACHINE”. This machine is designed for the purpose of multi-operation i.e. Grinding, punching, and cutting. This machine performs multipurpose operation at same time with required speed and this machine is automatic which is controlled or operated by pneumatic pressure. This model of multi-operational machine may be used in industry and domestic operation which can perform mechanical operation like grinding, punching, and cutting of a thin metallic as well as wooden model or body. A high pressure compressed air is forced on a fan and the fan is made to rotate. This rotation is transmitted to the machining head by a shaft and the required operation is carried out.

References