International Journal of Engineering Research

A. Naveen Kumar ¹, B. Gangadhara Shetty ²

Affiliations
1 Mechanical Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, IN
2 Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, IN

Abstract

Over the years metals like SS316l and its behavior and properties has established itself as the best available bio implant material. With the advancement in the field of material science, metallurgy and designing, the development for more advanced bio materials having better properties than metals is observed. It has been observed that one of the most important properties governing the suitability of the material to be a bio implant is 'wear resistance' 'Corrosion Resistance' and also the fatigue resistance. But in the recent trend metals as been completely replaced by other materials like alumina, composites, and also polymers which can have a very good biocompatibility then metals which as very good mechanical electrical and thermal properties compared to this type of material. In the biomaterials biocompatibility plays in main role in the behavior of implantation which recognize the pulse of the material which can be used as various polymer materials.

Keywords

Metals, Biocompatible, Polymers.

Full Text

   

G. Anoop Kumar ¹, A. Naveen Kumar ¹, B. Gangadhara Shetty ²

Affiliations
1 Mechanical Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, IN
2 Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, IN

Abstract

Energy is the driving force behind all the technological evolution that's happening around the world. Since fossil fuels are one of the main sources of energy, its volume is getting reduced by day. Hence, to overcome this, situation the fossil fuels must be replaced by some other alternative source of energy so that these fossil fuels can be saved to certain extend. This review is about recovery of energy from combustible, organic or bio degradable waste.

Keywords

Municipal Solid Waste, Waste to Energy.

Full Text

   

Chintu Kumar ¹, A. Naveen Kumar ¹, B. Gangadhara Shetty ²

Affiliations
1 Mechanical Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, IN
2 Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, IN

Abstract

The aim of the report is to highlight the final design report of a four-wheeler car with the rear engine system taking only the designer's perspective (Non-Technical) into consideration. To make final product, the design has been divided into sub divisions which are later on integrated into the final rendered model.

Keywords

Design, Rear Engine System, Perspective, Non-Technical, Rendered.

Full Text

   

A. Naveen Kumar ¹, B. Gangadhara Shetty ², M. Naveena ¹, Prashanth Gudodagi ¹

Affiliations
1 Mechanical Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, IN
2 Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, IN

Abstract

A biomaterial is essentially a material that is used and adapted for a medical application. This paper constitutes the wear study of SS304, PEEK and PEEK30% GF used as Bio-Material. One of the primary reasons that biomaterials are used is to physically replace hard or soft tissues that have become damaged or destroyed through some pathological process. It has been observed that one of the most important properties governing the suitability of the material to be a bio implant is 'WEAR RESISTANCE'. There is no specific standard for testing or measuring a materials wear resistance. The study was conducted by using a pinon-disk apparatus and is issued under the standard ASTM G-99. For the PIN-ON-DISK wear test conducted in this research, the specimens were a pin with a rounded tip, which is positioned perpendicular to a flat circular disk.

Keywords

Bio-Material, SS304, PEEK, PEEK30%GF, Wear Resistance.

Full Text