International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Analysis of MR Damper for Quarter and Half Car Suspension Systems of a Roadway Vehicle


Affiliations
1 Dept.of Mech. Engg., K L University, Vaddeswaram, Guntur, India
2 Dept.of Mech. Engg., University College of Engg., JNTUK, Kakinada, Andhra Pradesh, India
 

   Subscribe/Renew Journal


Magnetorheological (MR) dampers are evolving as one of the most promising devices for semi-active vibration control of various dynamic systems. In this paper, the suspension system of a car using MR damper is analysed for 2DOF quarter car and 4DOF half car models and then compared with corresponding suspension system using passive damper for ride comfort and handling. Magnetorheological damper is fabricated using a MR fluid of Carbonyl iron powder and Silicone oil added with additive. Experiments are conducted to establish the behaviour of the MR damper and are used to validate Spencer model for MR damper. Further, using the validated Spencer model of MR damper, the quarter car and half car models of Vehicle Suspension system are simulated by implementing a semi-active suspension system for analysing the resulting displacement and acceleration in the car body. The ride comfort and vehicle handling performance of each specific vehicle model with passive suspension system are compared with corresponding semi-active suspension system. The simulation and analysis are carried out using MATLAB/SIMULINK.

Keywords

Magnetorheological Dampers, Suspension Systems, Spencer Model, Simulation and Fabrication of MR Damper.
User
Subscription Login to verify subscription
Notifications
Font Size

  • D. Ryba. 1974. Improvements in dynamic characteristics of automobile suspension systems part 1. two-mass systems, Vehicle System Dynamics, 3(1). https://doi.org/ 10.1080/00423117408968445.

  • D.A. Crolla and M.B.A. Abdel-Hady. 1991. Active suspension control performance comparisons using control laws applied to a full-vehicle model, Vehicle System Dynamics, 20(2), 107-120. http://dx.doi.org/ 10.1080/00423119108968982.

  • J Wang and G Meng. 2001. Magnetorheological fluid devices principles, characteristics and applications in mechanical engg., Proc. IMechE Part J. Materials: Design & Applications, 3, 165-174.

  • R. Turczyn and M. Kciuk. 2008. Preparation and study of model Magnetorheological fluids, J. Achievements in Materials and Manufacturing Engg., 27(2), 131-134.

  • M. Jolly, J.W. Bender and J.D. Carlson. 1998. Properties and applications of commercial magnetorheological fluids, Proc. SPIE 5th Annual Int. Symp. Smart Structures and Materials, San Diego, USA.

  • B.F. Spencer, S. Dyke, M. Sain and J. Carlson. 1997. Phenomenological model for magnetorheological dampers, J. Eng. Mech., 123(3), 230-238. http://dx.doi.org/10.1061/(ASCE)0733-9399(1997)123 :3(230).

  • V.K. Grag and R.V. Dukkipati. 1984. Dynamics of Railway Vehicle Systems, Academic Press Inc.

  • B. Sapiński and J. Filuś. 2003. Analysis of parametric models of MR linear damper. J. Theoretical and Applied Mechanics, 41(2), 215-240.


Abstract Views: 450

PDF Views: 285




  • Analysis of MR Damper for Quarter and Half Car Suspension Systems of a Roadway Vehicle

Abstract Views: 450  |  PDF Views: 285

Authors

D. V. A. R. Sastry
Dept.of Mech. Engg., K L University, Vaddeswaram, Guntur, India
K. V. Ramana
Dept.of Mech. Engg., K L University, Vaddeswaram, Guntur, India
N. M. Rao
Dept.of Mech. Engg., University College of Engg., JNTUK, Kakinada, Andhra Pradesh, India
P. Pruthvi
Dept.of Mech. Engg., K L University, Vaddeswaram, Guntur, India
D. U. V. Santhosh
Dept.of Mech. Engg., K L University, Vaddeswaram, Guntur, India

Abstract


Magnetorheological (MR) dampers are evolving as one of the most promising devices for semi-active vibration control of various dynamic systems. In this paper, the suspension system of a car using MR damper is analysed for 2DOF quarter car and 4DOF half car models and then compared with corresponding suspension system using passive damper for ride comfort and handling. Magnetorheological damper is fabricated using a MR fluid of Carbonyl iron powder and Silicone oil added with additive. Experiments are conducted to establish the behaviour of the MR damper and are used to validate Spencer model for MR damper. Further, using the validated Spencer model of MR damper, the quarter car and half car models of Vehicle Suspension system are simulated by implementing a semi-active suspension system for analysing the resulting displacement and acceleration in the car body. The ride comfort and vehicle handling performance of each specific vehicle model with passive suspension system are compared with corresponding semi-active suspension system. The simulation and analysis are carried out using MATLAB/SIMULINK.

Keywords


Magnetorheological Dampers, Suspension Systems, Spencer Model, Simulation and Fabrication of MR Damper.

References





DOI: https://doi.org/10.4273/ijvss.9.1.04