International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Acceleration Analysis of Tubular Constrained Damping Engine Mount


Affiliations
1 School of Mech. Engg., Taiyuan University of Sci. and Tech., Taiyuan, Shanxi, China
 

   Subscribe/Renew Journal


Trackless vehicles have been widely used for the underground mining in many coal-rich countries. However, their vibration is violent and this vibration could affect the driver's health and reduce the working efficiency. Therefore, how to solve this question about the vibration and shock has become an urgent and important thing. In this paper, a type of tubular constrained damping engine mount is designed and first used in the underground trackless vehicles. This tubular damping structure is made of three layers, the external and internal layer are made of steel and the middle layer of natural rubber is sandwiched between them. To know about the vibration-reducing performance of the new designed mounts, the real vehicle test was performed under two working conditions. The results show that the two rear mounts could obtain good vibration isolation effect, whereas the performance are sometimes poor in a certain direction for the two front mounts because of the vibration energy coupling in different directions. Further research is to optimize the parameters of the tubular constrained damping engine mount to make the vibration energies from different directions decoupled.

Keywords

Underground Trackless Vehicle, Tubular Structure, Engine Mount, Constrained Damping.
User
Subscription Login to verify subscription
Notifications
Font Size

  • R. Hansen. 2015. Analysis of methodologies for calculating the heat release rates of mining vehicle fires in underground mines, Fire Safety J., 71, 194-216. https://doi.org/10.1016/j.firesaf.2014.11.008.

  • A.K. Dash, R.M. Bhattcharjeea, P.S. Paul and M. Tikader. 2015. Study and analysis of accidents due to wheeled trackless transportation machinery in indian coal mines - identification of gap in current investigation system, Proc. Earth and Planetary Sci., 11, 539-547. https://doi.org/10.1016/j.proeps.2015.06.056.

  • A.T. Alisaraei, B. Ghobadian, T.T. Hashjin and S.S. Mohtasebi. 2012. Vibration analysis of a diesel engine using biodiesel and petrodiesel fuel blends, Fuel, 102, 414-422. https://doi.org/10.1016/j.fuel.2012.06.109.

  • Y.H. Yu, S.M. Peelamedu, N.G. Naganathan and R.V. Dukkipati. 2001. Automotive vehicle engine mounting systems: A survey, J. Dyn. Syst.-T ASME, 123(6), 186-193.

  • J. Orivuori, I. Zazas and S. Daley. 2012. Active control of frequency varying disturbances in a diesel engine, Control Engg. Pract., 20, 1206-1219.

  • M. Ostberg, M. Coja and L. Kari. 2013. Dynamic stiffness of hollowed cylindrical rubber vibration isolators - the wave-guide solution, Int. J. Solids Struct., 50, 1791-1811. https://doi.org/10.1016/j.ijsolstr.2013.02.008.

  • W.C. Flower. 1985. Understanding hydraulic mounts for improved vehicle noise, vibration and ride qualities, SAE Technical Paper Series, 850975.

  • J. Christopherson and G. Nakhaie Jazar. 2006. Dynamic behavior comparison of passive hydraulic engine mounts. Part 1: Mathematical analysis, J. Sound Vibr., 290, 1040-1070. https://doi.org/10.1016/j.jsv.2005.05.008.

  • T.Q. Truong and K.K. Ahn. 2010. A new type of semi-active hydraulic engine mount using controllable area of inertia track, J. Sound Vibr., 329, 247-260. https://doi.org/10.1016/j.jsv.2009.09.015.

  • C. Bohn, A. Cortabarria, V.H. Artel and K. Kowalczyk. 2004. Active control of engine-induced vibrations in automotive vehicles using disturbance observer gain scheduling, Control Engg. Pract., 12(8), 1029-1039.

  • I.L. Ladipo, J.D. Fadly and W.F. Faris. 2016. Characterization of magnetorheological elastomer (MRE) engine mounts, Materials Today: Proc., 3, 411-418. https://doi.org/10.1016/j.matpr.2016.01.029.

  • J. Cheer and S.J. Elliott. 2016. Active noise control of a diesel generator in a luxury yacht, Appl. Acoust.,105, 209-214. https://doi.org/10.1016/j.apacoust.2015.12.007.

  • S. Prakash, T.G. Renjith Kumar, S. Raja and D. Dwarakanathan. 2016. Active vibration control of a full scale aircraft wing using a reconfigurable controller, J. Sound Vibr., 36, 132-149. https://doi.org/10.1016/j.jsv.2015.09.010.

  • S. Daley, F.A. Johnson, J.B. Pearson and R. Dixon. 2004. Active control for marine applications, Control Engg. Pract., 12(4), 465-474.

  • J. Shen, H.Q. Zhu, M.G. Luo and D.L. Liu. 2016. Numerical simulation of CO distribution discharged by flame-proof vehicle in underground tunnel of coal mine, J. Loss Prevent Proc., 40, 117-121. https://doi.org/10.1016/j.jlp.2015.12.009.

  • P. Charles, J.K. Sinha, F. Gu and L. Lidstone. 2009. Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis, J. Sound Vibr., 321, 1171-1185. https://doi.org/10.1016/j.jsv.2008.10.024.

  • M. Hooshang, R. Askari Moghadam and S. AlizadehNia. 2016. Dynamic response simulation and experiment for gamma-type stirling engine, Renew. Energ., 86, 192-205. https://doi.org/10.1016/j.renene.2015.08.018.


Abstract Views: 333

PDF Views: 133




  • Acceleration Analysis of Tubular Constrained Damping Engine Mount

Abstract Views: 333  |  PDF Views: 133

Authors

Bijuan Yan
School of Mech. Engg., Taiyuan University of Sci. and Tech., Taiyuan, Shanxi, China
Baoxiang Lang
School of Mech. Engg., Taiyuan University of Sci. and Tech., Taiyuan, Shanxi, China
Zhangda Zhao
School of Mech. Engg., Taiyuan University of Sci. and Tech., Taiyuan, Shanxi, China
Dagang Sun
School of Mech. Engg., Taiyuan University of Sci. and Tech., Taiyuan, Shanxi, China

Abstract


Trackless vehicles have been widely used for the underground mining in many coal-rich countries. However, their vibration is violent and this vibration could affect the driver's health and reduce the working efficiency. Therefore, how to solve this question about the vibration and shock has become an urgent and important thing. In this paper, a type of tubular constrained damping engine mount is designed and first used in the underground trackless vehicles. This tubular damping structure is made of three layers, the external and internal layer are made of steel and the middle layer of natural rubber is sandwiched between them. To know about the vibration-reducing performance of the new designed mounts, the real vehicle test was performed under two working conditions. The results show that the two rear mounts could obtain good vibration isolation effect, whereas the performance are sometimes poor in a certain direction for the two front mounts because of the vibration energy coupling in different directions. Further research is to optimize the parameters of the tubular constrained damping engine mount to make the vibration energies from different directions decoupled.

Keywords


Underground Trackless Vehicle, Tubular Structure, Engine Mount, Constrained Damping.

References





DOI: https://doi.org/10.4273/ijvss.9.4.01