Open Access
Subscription Access
Experimental Investigation of Ignition Timing on the Performance and Emission Characteristics of a Crank-Rocker Engine
Subscribe/Renew Journal
The effects of varying the ignition timing on the performance and emissions characteristics of a crank-rocker engine were experimentally investigated. Experiments were carried out at five different ignition timings of 6.5°, 8.5°, 10.5°, 12.5° and 14.5° CA BTDC at engine speed of 2000rpm and wide open throttle position. Performance data such as brake torque, brake power, brake specific fuel consumption and brake thermal efficiency were calculated. Engine exhaust gas emission such as CO, CO2, HC and NOx have also been measured. The results showed that at 10.5° CA (BTDC) ignition timing, the crank-rocker engine produce maximum brake torque, brake power, BTE and minimum value for the BSFC. In general, CO and HC emissions decreased while CO2 and NOx emissions increased with ignition timing advance. The findings in this paper are useful for researchers and engine developers in understanding the trade-offs and physical limitations of crank-rocker engine designs.
Keywords
Ignition Timing, Curved-Cylinder, Crank-Rocker Engine, Performance and Emissions.
User
Subscription
Login to verify subscription
Font Size
Information
- J. Zareei and A. Kakaee. 2013. Study and the effects of ignition timing on gasoline engine performance and emissions, European Transport Research Review, 5(2), 109-116. https://doi.org/10.1007/s12544-013-0099-8.
- S. Yousufuddin and S. N. Mehdi. 2008. Effect of ignition timing, equivalence ratio and compression ratio on the performance and emission characteristics of a variable compression ratio SI engine using ethanol unleaded gasoline blends, Int. J. Engg. Transactions B: Applications, 21(1), 97-106.
- R. Daniel, C. Wang, H. Xu and G. Tian. 2012. Effects of combustion phasing, injection timing, relative air-fuel ratio and variable valve timing on SI engine performance and emissions using 2, 5-dimethylfuran, SAE Int. J. Fuels and Lubricants, 5(2), 855-866. https://doi.org/10.4271/2012-01-1285.
- R. Daniel, G. Tian, H. Xu, M.L. Wyszynski, X. Wu and Z. Huang. 2011. Effect of spark timing and load on a DISI engine fuelled with 2, 5-dimethylfuran. Fuel, 90(2), 449-458. https://doi.org/10.1016/j.fuel.2010.10.008.
- A. Kakaee, M. Shojaeefard and J. Zareei. 2011. Sensitivity and effect of ignition timing on the performance of a spark ignition engine: an experimental and modeling study, J. Combustion, 8. https://doi.org/10.1155/2011/678719.
- A. Kakaee and J. Zareei. 2013. Influence of varying timing angle on performance of an SI engine: An experimental and numerical study, J. Computational & Applied Research in Mech. Engg., 2(2), 33-43.
- S. Soylu and J. Van Gerpen. 2004. Development of empirically based burning rate sub-models for a natural gas engine, Energy Conversion and Management, 45(4), 467-481. https://doi.org/10.1016/S0196-8904(03)0016-4X.
- M. Guerrier and P. Cawsey. 2004. The development of model based methodologies for gasoline IC engine calibration, SAE Technical Paper, 0148-7191.
- K. Roepke, A. Rosenek and M. Fischer. 2002. Practical application of DoE methods in the development of production internal combustion engines, Proc. Int. Conf. on Statistics and Analytical Methods in Automotive Engg., 105.
- R. Ebrahimi. 2011. Effect of specific heat ratio on heat release analysis in a spark ignition engine, Scientia Iranica, 18(6), 1231-1236. https://doi.org/10.1016/j.scient.2011.11.002.
- R.H. Ganesh, V. Subramanian, V. Balasubramanian, J. Mallikarjuna, A. Ramesh and R. Sharma. 2008. Hydrogen fueled spark ignition engine with electronically controlled manifold injection: An experimental study, Renewable Energy, 33(6), 1324-1333. https://doi.org/10.1016/j.renene.2007.07.003.
- F. Ma, Y. Wang, H. Liu, Y. Li, J. Wang and S. Zhao. 2007. Experimental study on thermal efficiency and emission characteristics of a lean burn hydrogen enriched natural gas engine, Int. J. Hyd. Energy, 32(18), 5067-5075. https://doi.org/10.1016/j.ijhydene.2007.07.048.
- M. Farrell. 1993. Oscillating piston engine, United State Patent, 5,222,463.
- K.V. Hoose. 2005. Toroidal internal combustion engine, United State Patent, 20,050,016,493.
- R. Morgado. 2007. Internal combustion engine and method. United State Patent, 20,070,199,537.
- H. Hüttlin. 2008. Oscillating Piston Machine. United State Patent 743, 5064.
- L. Giurca. 2013. Hybrid Opposite Piston Engine - HOPE & Portable Range Extender, Powertrain Tech.
- E. Taurozzi. 2002. Balanced modular pendulum mechanism. United State Patent, 638, 2143.
- S.E. Mohammed, M.B. Baharom and A.R.A. Aziz. 2017. Performance and combustion characteristics of a novel crank-rocker engine, J. Mech. Sci. and Tech., 31(7), 3563-3571. https://doi.org/10.1007/s12206-017-0643-x.
Abstract Views: 351
PDF Views: 165