International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Numerical Investigation of Pressure Drop for Various Models of Catalytic Converter to Capture CO2 Emission using Activated Carbon


Affiliations
1 Dept. of Automobile Engg., Kumaraguru College of Tech., Coimbatore, India
 

   Subscribe/Renew Journal


Internal combustion engines are found to be extensively used in both mobile and stationary applications. The major drawbacks in diesel engines are the release of harmful gases like HC, CO, NOx and PM into atmosphere. There is several pre combustion and post combustion techniques are available to control these emissions effectively. Although CO2 emissions from I.C engines considered as a regulated emission but it is a leading contributor towards Greenhouse gases. In this work a numerical investigation on backpressure was carried out by varying porosity factor of activated carbon. Activated Carbon seems to be viable substance to capture CO2 emission from diesel exhaust. To evaluate the backpressure an analysis was carried out using CFD ANSYS fluent software. In the present investigation an analysis is carried out by placing activated carbon at three different variations. Then the analysis are done by varying three different porosity percentages 30,35 and 45 by placing activated carbon at three different locations. Final study reveals that activated carbon placed at PC35-3 layout shows optimum backpressure and high filtration efficiency while compared with other two layouts.

Keywords

Carbon Dioxide, Backpressure, CFD ANSYS, Filtration Efficiency.
User
Subscription Login to verify subscription
Notifications
Font Size

  • A.M. Liaquat, M.A. Kalam, H.H. Masjuki and M.H. Jayed. 2010. Potential emissions reduction in road transport sector using biofuel in developing countries, Atmospheric Environment, 44, 3869-3877. https://doi.org/10.1016/j.atmosenv.2010.07.003.

  • J.R. Li, Y. Ma, M.C. McCarthy, J. Sculley, J. Yu, H.K. Jeong, P.B. Balbuena and H.C. Zhou. 2011. Carbondioxide capture-related gas adsorption and separation in metalorganic frameworks, Coord. Chem., 255, 1791-1823. https://doi.org/10.1016/j.ccr.2011.02.012.

  • S. Choi, J.H. Drese and C.W. Jones. 2009. Adsorbent materials for carbondioxide capture from large anthropogenic point sources, Chem. Sus. Chem., 2, 796-854. https://doi.org/10.1002/cssc.200900036.

  • S.M. Kumar and P.S. Kumar. 2015. Numerical and experimental investigation of back pressure in various models of catalytic converter, Int. J. Applied Engg. Research, 10(61), 16-23.

  • S.J. Muthiya, V. Amarnath, P.S. Kumar and S.M. Kumar. 2015. Experimental investigation and controlling of CO2 emission from automobile exhaust by CCS technique. Int. J. Applied Engg. Research, 10(61), 36-46.

  • C.A. Scholes, S.E. Kentish and G.W. Stevens. 2008. Carbondioxide separation through polymeric membrane systems for flue gas applications, Recent Patents on Chemical Engg., 1, 52-66. https://doi.org/10.2174/2211334710801010052.


Abstract Views: 226

PDF Views: 110




  • Numerical Investigation of Pressure Drop for Various Models of Catalytic Converter to Capture CO2 Emission using Activated Carbon

Abstract Views: 226  |  PDF Views: 110

Authors

S. Mohan kumar
Dept. of Automobile Engg., Kumaraguru College of Tech., Coimbatore, India
S. Satish
Dept. of Automobile Engg., Kumaraguru College of Tech., Coimbatore, India

Abstract


Internal combustion engines are found to be extensively used in both mobile and stationary applications. The major drawbacks in diesel engines are the release of harmful gases like HC, CO, NOx and PM into atmosphere. There is several pre combustion and post combustion techniques are available to control these emissions effectively. Although CO2 emissions from I.C engines considered as a regulated emission but it is a leading contributor towards Greenhouse gases. In this work a numerical investigation on backpressure was carried out by varying porosity factor of activated carbon. Activated Carbon seems to be viable substance to capture CO2 emission from diesel exhaust. To evaluate the backpressure an analysis was carried out using CFD ANSYS fluent software. In the present investigation an analysis is carried out by placing activated carbon at three different variations. Then the analysis are done by varying three different porosity percentages 30,35 and 45 by placing activated carbon at three different locations. Final study reveals that activated carbon placed at PC35-3 layout shows optimum backpressure and high filtration efficiency while compared with other two layouts.

Keywords


Carbon Dioxide, Backpressure, CFD ANSYS, Filtration Efficiency.

References





DOI: https://doi.org/10.4273/ijvss.10.5.03