International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Fabrication, Analysis and Testing of Smart Adaptive Composite Beams


Affiliations
1 Dept. of Mech., Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, India
2 Dept. of Mech., Engg., R V College of Engg., Bengaluru, India
3 National Aerospace Laboratories, Bengaluru, India
 

   Subscribe/Renew Journal


The presented research involves two types of Smart adaptive composite beams (SAC). The study was conducted on smart composite beams composed of LY5210 and EPOLAM 2063 resin systems respectively. The fabrication of composite beams involved embedding SMA wires in between layers of 0/90 woven glass fibre in the respective resin systems, followed by suitable curing and post curing cycles. Suitable mould was designed and manufactured to facilitate the required pre-straining of SMA wires. Both static and dynamic tests were done on the SAC specimens to study the behaviour of these SACs. Static and free vibration analyses were carried out using MSC Nastran and Hypermesh. There has been good agreement between the results of finite element analysis and the experimental results.

Keywords

Smart Composites, Free Vibration, Modal Analysis, Natural Frequencies, Shape Memory Alloys.
User
Subscription Login to verify subscription
Notifications
Font Size

  • T.W. Duerig, K.N. Melton, D. Stkel and C.M. Wayman. 1990. Engineering Aspects of Shape-Memory Alloys, Butterworth-Heinemann, Boston.

  • V. Birman, K. Chandrashekhara and S. Sain. 1996. An approach to the optimization of shape memory alloy hybrid composite plates subject to low-velocity impact, Composites, Part B, 27, 439-446. https://doi.org/ 10.1016/1359-8368(96)00010-8.

  • R. Stalmans, L. Delaey and J. Van Humbeeck. 1997. Modelling of adaptive composite materials with embedded shape memory alloy wires, Mater. Res. Soc. Symp. Proc., 459, 119-130. https://doi.org/10.1557/PROC-459-119.

  • S. Marfia, E. Sacco and J.N. Reddy. 2003. Superelastic and shape memory effects for laminated SMA beams, AIAA J., 41(1), 100-109. https://doi.org/10.2514/2.1918.

  • S. Marfia and E. Sacco. 2005. Micromechanics and homogenization of SMA-wire-reinforced materials, J. Applied Mechanics, 72(2), 259-268. https://doi.org/10.1115/1.1839186.

  • M. Cherkaoui, Q.P. Sun and G.Q. Song. 2000. Micromechanics modelling of composite with ductile matrix and shape memory alloy reinforcement, Int. J. Solids Struct, 37, 1577-1594. https://doi.org/10.1016/S0020-7683(98)00332-1.

  • C.S. Jarali and S. Raja. 2008. Homogenization and pseudoelastic behaviour of composite materials reinforced with shape memory alloy fibres, J. Composite Materials, 42, 1685-1707. https://doi.org/10.1177/0021998308092201.

  • C.S. Jarali, S. Raja and A.R. Upadhya. 2008. Micromechanical behaviours of SMA composite materials under hydro-thermo-elastic strain fields, Int. J. Solids and Structures, 45, 2399-2419. https://doi.org/10.1016/j.ijsolstr.2007.12.003.

  • H.J. Lee, J.J. Lee and J.S. Huh. 1999. A simulation study on the thermal buckling behaviour of laminated composite shells with embedded shape memory alloy wires, Compos. Struct., 47, 463-469. https://doi.org/10.1016/S0263-8223(00)00020-9.

  • B. Noolvi, S. Raja, S. Nagaraj and V.R. Mudradi. 2017. Fabrication and testing of SMA composite beam with shape control, AIP Conference Proc., 020055. https://doi.org/10.1063/1.4990208.


Abstract Views: 335

PDF Views: 143




  • Fabrication, Analysis and Testing of Smart Adaptive Composite Beams

Abstract Views: 335  |  PDF Views: 143

Authors

Basavaraj Noolvi
Dept. of Mech., Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, India
Shanmukha Nagaraj
Dept. of Mech., Engg., R V College of Engg., Bengaluru, India
S. Raja
National Aerospace Laboratories, Bengaluru, India

Abstract


The presented research involves two types of Smart adaptive composite beams (SAC). The study was conducted on smart composite beams composed of LY5210 and EPOLAM 2063 resin systems respectively. The fabrication of composite beams involved embedding SMA wires in between layers of 0/90 woven glass fibre in the respective resin systems, followed by suitable curing and post curing cycles. Suitable mould was designed and manufactured to facilitate the required pre-straining of SMA wires. Both static and dynamic tests were done on the SAC specimens to study the behaviour of these SACs. Static and free vibration analyses were carried out using MSC Nastran and Hypermesh. There has been good agreement between the results of finite element analysis and the experimental results.

Keywords


Smart Composites, Free Vibration, Modal Analysis, Natural Frequencies, Shape Memory Alloys.

References





DOI: https://doi.org/10.4273/ijvss.10.5.05