Open Access
Subscription Access
Open Access
Subscription Access
Estimation of Flow Rate and Sizing of Trickling Filter in a Recirculating Aquaculture System
Subscribe/Renew Journal
In a recirculating aquaculture system (RAS), waste is generated from uneaten feed, fish faecal matter and organic debris from dead and dying organisms. These wastes generally decompose to produce mainly nitrogenous compounds in the form of ammonia, nitrite and nitrate. These nitrogenous compounds are particularly important in intensive RAS because of their toxicity to culture organisms. Therefore, removal of these compounds is very much necessary for successful operation of RAS. Adsorption, ion exchange and biological filtration are the three major available options for removal of nitrogenous wastes. In the first two options, frequent regeneration of media is required which usually increases the cost of the operation. Therefore, in the present study biological filtration has been chosen an option for aquaculture wastewater treatment. In the present study proper sizing of biofilter based on mass balance approach has been presented which is of critical importance to the successful design of any recirculation system.
Keywords
Recirculation System, Nitrogenous Compounds, Biological Filtration.
Subscription
Login to verify subscription
User
Font Size
Information
- Boyd, C.E. (1982). Water quality management for pond fish culture, Elsevier Scientific Publishing Co., New York, 318 pp.
- Brambilla, F., Antonini, M., Ceccuzzi, P., Terova, G. and Saroglia, M. (2008). Foam fractionation efficiency in particulate matter and heterotrophic bacteria removal from a recirculating seabass (Dicentrarchus la brax) system, Aquacultural Engg., 39 (1): 37–42.
- Emerson, K., Russo, R.C., Lung, R.E. and Thurston, R.V. (1975). Aqueous ammonia equilibrium calculations: effects of pH and temperature. J. Fisheries Res. Board Canada, 32: 2379–2383.
- Lawson, T.B. (1994). Fundamentals of aquacultural engineering, Chapmann and Hall, New York, USA.
- Losordo, T.M. and Hobbs, A.O. (2000). Using computer spreadsheets for water flowand biofilter sizing in recirculating aquaculture production systems. Aquacultural Engg., 23 (1–3): 95–102.
- Malone, R.F. and DeLos Reyes, A.A. (1997). Categories of recirculating aquaculture systems, Aquacultural Engineering Society Proceedings III, Advances in Aquacultural Engineering, a publication of the Northeast Regional Agricultural Engineering Service (NRAES-105). pp. 197–208.
- Parker, D., Lutz, M., Andersson, B. and Aspegren, H. (1995). Effect of operating variables on nitrification rates in trickling filters.Water Environ. Res., 67 (7): 1111–1118.
- Penry, D.L. and Jumars, P.A. (1986). Chemical reactor analysis and optimal digestion. Bio Sci., 36: 310–315.
- Tanveer, M., Moulick, S. and Mukherjee, C.K. (2016). Development of framework for modelling recirculating aquaculture system. In: P., Rajinder, Dhawan, A.K., Bano, F. and Risam, K.S. Natural resource management ecological perspectives. Indian Ecological Society: International Conference- 18-20 February, 2016, SKAUST Jammu. 581-582 pp.
- USEPA (1975). Process design manual for nitrogen control, US Environmental Protection Agency, Office of Technology Transfer, Washington, D.C.
- Westers, H. (1995). Feed and feeding strategies to reduce aquaculture waste, In: Aquacultural engineering and waste management, Timmons, M.B., editor, Northeast Regional Agricultural Engineering Service, Ithaca, New York, U.S.A. pp. 365–376.
- Wheaton, F.W. (1985). Aquacultural Engineering, John Wiley and Sons, New York, 708 pp.
- Wimberly, D.M. (1990). Development and evaluation of a low density media biofiltration unit for use in recirculating finfish culture systems, Louisiana State University, Baton Rouge 162 pp.
Abstract Views: 205
PDF Views: 0