Journal of the Association of Engineers, India

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Wet Turning of AISI 52100 Steel-An Experimental Investigation


Affiliations
1 Department of Mechanical Engineering, Bankura Unnayani Institute of Engineering, Bankura-722146, West Bengal, India
2 Department of Mechanical Engineering, Kalyani Govt. Engineering College, Kalyani-741235, West Bengal, India
     

   Subscribe/Renew Journal


This paper concerns with machinability study by judging cutting force, chip formed and chip reduction coefficient while finish turning of AISI 52100 steel employing a number of tool inserts in wet environment. This kind of steel is utilized in constructing different structures, equipment, etc. Turning tests are carried out with varying speed-feed combinations. Narrow groove, plain (without any groove) and wide groove coated carbide inserts are used. Chip formed, cutting force components, etc. are observed. From the results obtained, some conditions are tried to explore corresponding to desired machinability. Good machining performance is reported with plain tool insert at the cutting velocity of 161 m/min and 253 m/min within the scope of the present work.

Keywords

Machining, Turning, Coated Carbide, Cutting Force, Insert, Cutting Tool, Wet Condition.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Kalpakjian, S. and Schmid, S.R., Manufacturing Processes for Engineering Materials, Pearson Publication, India, 2016.

  • Agrawal, A., Goel, S., Rashid, W.B. and Price, M., Prediction on surface roughness during hard turning of AISI 4340 steel (69 HRC), Applied Soft Computing, Vol. 30, pp. 233-238, 2015.

  • Zhou, J. and Andersson, M., Effect of lubricant condition and tool wear in hard turning of novel-abrasion-resistance (N-AR) cast iron, Materials and Manufacturing Processes, Vol. 22, pp. 865-870, 2007.

  • Davim, J.P. and Figueira, L., Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques, Materials and Design, Vol. 28, pp. 1186-1191, 2007.

  • Mondal, K., Das, S., Mandal, B. and Sarkar, D., An investigation on turning hardened steel using different tool inserts, Materials and Manufacturing Processes, Vol. 31(13), pp. 1770-1781, 2016.

  • Mondal, K. and Das, S., An investigation on machinability during turning hardened steel in dry condition, Journal of The Institution of Engineers (India): Series C, DOI: 10.1007/s40032-017-0370-1, 2017.

  • Mondal, K. and Das, S., An investigation on machinability during hard turning with narrow groove tool insert in different environmental conditions, Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, p. 200, 2015.

  • Mahanty, P.S., Mondal, B.N. and Das, S., Development and performance testing of toughened alumina ceramic cutting tool, Proceedings of the International Conference on Advanced Manufacturing Technology, Durgapur, India, pp. 547-553, 2007.

  • Sarkar, S., Sarkar, S., Das, P.K., Das, S. and Paul, S., Performance of a newly developed multiwalled carbon nanotube reinforced alumina tool insert during turning of AISI 1060 steel, Journal of Association of Engineers, Vol. 86(1-2), pp. 64-79, 2016.

  • Sarkar, S., Mondal, K., Das, S. and Das, P.K., A brief experimental investigation on wearing of CNT reinforced alumina insert, Manufacturing Technology Today, Vol. 15(7), pp. 31-35, 2016.

  • El Hakim, M.A., Shalaby, M.A., Veldhuis, S.C. and Dosbaeva, G.K., Effect of secondary hardening on cutting forces, cutting temperature, and tool wear in hard turning of high alloy tool steels, Measurement, Vol. 65, pp. 233-238, 2015.

  • Sahoo, A.K. and Sahoo, B., Experimental investigation on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts, Measurement, Vol. 45, pp. 2153-2165, 2012.

  • Chattopadhyay, A.B., Machining and Machine Tools, Wiley India Pvt. Ltd., India, 2011.

  • Jerold, B.D. and Kumar, M.P., Machining of AISI 316 stainless steel under carbon-di-oxide cooling, Materials and Manufacturing Processes, Vol. 27, pp. 1059-1065, 2012.

  • Fratila, D. and Caizar, C., Investigation of the influence of process parameters and cooling method on the surface quality of AISI-1045 during turning. Materials and Manufacturing Processes, Vol. 27, pp. 1123-1128, 2012.

  • Mia, M. and Dhar, N.R., Optimization of surface roughness and cutting temperature in high-pressure coolant-assisted hard turning using Taguchi method, International Journal of Advanced Manufacturing Technology, Vol. 88, pp. 739-753, 2017.

  • Sing, R.K., Sharma, A.K., Dixit, A.R., Tiwari, A.K., Pramanik, A. and Mandal, A., Performance evaluation of alumina- graphene hybrid nano-cutting fluid in hard turning, Journal of Cleaner Production, Vol.162, pp. 830-845, 2017.

  • Chen, L., Tai, B.L., Chaudhari, R.G., Song, X. and Shih, A.J., Machined surface temperature in hard turning, International Journal of Machine Tools and Manufacture, DOI: http://dx.doi.org/10.1016/j.ijmachtools.2017.03.003, 2017.

  • Liew, P.J., Shaaroni, A., Sidik, N.A.C. and Yan, J., An overview of current status of cutting fluids and cooling techniques of turning hard steel, International Journal of Heat and Mass Transfer, Vol.114, pp. 380-394, 2017.

  • Akincioglu, S., Gokkaya, H. and Uygur, I., The effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of hastelloy C22 based on Taguchi method, International Journal Advanced Manufacturing Technology, Vol. 82(1-4), pp. 303-314, 2016.

  • Singh, D. and Rao, P.V., Performance improvement of hard turning with solid lubricants, International Journal of Advanced Manufacturing Technology, Vol. 38, pp. 529-535, 2008.

  • Pereira, O., Rodriguez, A., Fernandez-Valdivielso, A., Barreiro, J., Fernandez-Abiab, A.I. and Lopez-de-Lacalleb, L.N., Cryogenic hard turning of ASP23 steel using carbon dioxide, Procedia Engineering, Vol.132, pp. 486-491, 2015.


Abstract Views: 473

PDF Views: 4




  • Wet Turning of AISI 52100 Steel-An Experimental Investigation

Abstract Views: 473  |  PDF Views: 4

Authors

Krishnendu Mondal
Department of Mechanical Engineering, Bankura Unnayani Institute of Engineering, Bankura-722146, West Bengal, India
Santanu Das
Department of Mechanical Engineering, Kalyani Govt. Engineering College, Kalyani-741235, West Bengal, India

Abstract


This paper concerns with machinability study by judging cutting force, chip formed and chip reduction coefficient while finish turning of AISI 52100 steel employing a number of tool inserts in wet environment. This kind of steel is utilized in constructing different structures, equipment, etc. Turning tests are carried out with varying speed-feed combinations. Narrow groove, plain (without any groove) and wide groove coated carbide inserts are used. Chip formed, cutting force components, etc. are observed. From the results obtained, some conditions are tried to explore corresponding to desired machinability. Good machining performance is reported with plain tool insert at the cutting velocity of 161 m/min and 253 m/min within the scope of the present work.

Keywords


Machining, Turning, Coated Carbide, Cutting Force, Insert, Cutting Tool, Wet Condition.

References





DOI: https://doi.org/10.22485/jaei%2F2017%2Fv87%2Fi3-4%2F166113