Journal of Geological Society of India (Online archive from Vol 1 to Vol 78)

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Strain-Rate Estimation Using Fractal Analysis of Quartz Grains in Naturally Deformed Rocks


Affiliations
1 Department of Geology and Geophysics, Indian Institute of Technology, Kharagpur - 721302, West Bengal, India
     

   Subscribe/Renew Journal


The area-perimeter fractal dimension (D) of quartz grains has earlier been proposed as a strain-rate gauge based on experimental deformation of quartz aggregates. To test the application in naturally deformed rocks, D is calculated in (a) three quartzites belonging to the Lunavada Group of rocks (Aravalli Mountain Belt, NW India) that developed textures between 420-600°C and (b) one quartz reef sample from the Malanjkhand Granite (Central India), which underwent dynamic recrystallization between 250-400°C. Using the above T ranges and calculated D values, strain-rates are calculated for the two sets of samples. A 10-12.7 s-1 strain rate at 250°C is calculated for the quartz reef sample. However, at higher temperatures the calculated strain-rate is >10-10 s-1 for the quartz reef and the quartzite samples. The quartzites show evidence of dynamic recrystallization by grain boundary migration (GBM) and subgrain rotation (SGR), while the quartz reef is replete with evidence of bulging (BLG) recrystallization. T and calculated strainrates are plotted on available recrystallization map of quartz. It is demonstrated that whilst the T/strain-rate of the quartzites does not fall in the region of GBM and SGR, the T/strain-rate of the quartz reef falls in the BLG region. The problems with strain-rate calculations using area perimeter fractal dimension are discussed. It is concluded that the method of strain-rate calculation can be used only for lower T.

Keywords

Strain-Rate, Fractals, Quartz, Deformation.
Subscription Login to verify subscription
User
Notifications
Font Size

  • BAKKER, R.J. and MAMTANI, M.A. (2000) Fluid inclusions as metamorphic process indicators in the southern Aravalli mountain belt (India). Contrib. Mineral. Petrol., v.139, pp.163-179.

  • GOPALAN, K., TRIVEDI, J.R., MERH, S.S., PATEL, P.P. and PATEL, S.G. (1979) Rb-Sr age of Godhra and related granites, Gujarat (India). Proc. Indian Acad. Sci. (Earth and Planet. Sci.), v.88A, pp.7-17.

  • GUPTA, S.N., MATHUR, R.K. and ARORA, Y.K. (1992) Lithostratigraphy of Proterozoic rocks of Rajasthan and Gujarat - A review. Rec. Geol. Surv. India, v.115, pp.63-85.

  • GUPTA, S.N., ARORA,Y.K., MATHUR, R.K., IQBALUDDIN, B.P., SAHAI, T.N. and SHARMA, S.B. (1995) Geological Map of the Precambrians of the Aravalli Region, Southern Rajasthan and Northeastern Gujarat, India. Geol. Surv. India Publ., Hyderabad.

  • HIRTH, G. and TULLIS, J. (1992) Dislocation creep regimes in quartz aggregates. Jour. Struct. Geol., v.14, pp.145-60.

  • MAJUMDER, S. and MAMTANI, M.A. (2009a). Magnetic fabric in the Malanjkhand Granite (central India)-implications for regional tectonics and Proterozoic suturing of the Indian shield. Phys. Earth and Planet. Int., v.172, pp.310-323.

  • MAJUMDER, S. and MAMTANI, M.A. (2009b) Intensity of shape preferred orientation in a granite and its tectonic implications. Curr. Sci., v.96, pp.156-160.

  • MAJUMDER, S. and MAMTANI, M.A. (2009c) Fractal analysis of quartz grain boundary sutures in a granite (Malanjkhand, central India) - implications to infer regional tectonics. Jour. Geol. Soc. India, v.73, pp.309-319.

  • MAMTANI, M.A. (1998) Deformation mechanisms of the Lunavada Precambrian rocks, Panchmahal district, Gujarat. Unpublished Ph.D. thesis, M.S. University of Baroda (India), 268p.

  • MAMTANI, M.A. and KARANTH, R.V. (1996) Effect of heat on crystal size distributions of quartz. Curr. Sci., v.70, pp.396-399.

  • MAMTANI, M.A. and KARANTH, R.V. (1997) Syntectonic growth of porphyroblasts over crenulation cleavages - an example from the Precambrian rocks of the Lunavada Group, Gujarat. Jour. Geol. Soc. India, v.50, pp.171-178.

  • MAMTANI, M.A. and GREILING, R.O. (2005) Granite emplacement and its relation with regional deformation in the Aravalli Mountain Belt (India)-inferences from magnetic fabric. Jour. Struct. Geol., v.27, pp.2008-2029.

  • MAMTANI, M.A. and GREILING, R.O. (in press) Serrated quartz grain boundaries, temperature and strain rate: testing fractal techniques in a syntectonic granite. In: G. Gosso, A.M. Marotta and I. Spalla, I. (Eds.), Advances in Interpretation of Geological Processes: Refinement of Multi-Scale Data and Integration in Numerical Modelling. Geol. Soc. London Spec. Publ., (inpress).

  • MAMTANI, M.A., KARANTH, R.V. and GREILING, R.O. (1999) Are crenulation cleavage zones mylonites on the microscale? Jour. Struct. Geol., v.21, pp.711-718.

  • MAMTANI, M.A., MUKHERJI, A. and CHAUDHURI, A.K. (2007) Microstructures in a Banded Iron Formation (Gua mine, India). Geol. Mag., v.144, pp.271-287.

  • MAMTANI, M.A., KARANTH, R.V., MERH, S.S. and GREILING, R.O. (2000) Tectonic Evolution of the Southern Part of Aravalli Mountain Belt and its Environs: Possible Causes and Time Constraints. Gond. Res., v.3, pp.175-187

  • MAMTANI, M.A., MERH, S.S., KARANTH, R.V. and GREILING, R.O. (2001) Time relationship between metamorphism and deformation in Proterozoic rocks of the Lunavada region, southern Aravalli mountain belt (India) - a microstructural study. Jour. Asian Earth Sci., v.19, pp.195-205.

  • PANIGRAHI, M.K. and MOOKHERJEE, A. (1997). The Malanjkhand copper (+molybdenum) deposit, India: Mineralization from a low-temperature ore-fluid of granitoid affiliation. Mineralium Deposita, v.32, pp.133-148.

  • PANIGRAHI, M.K., BREAM, B.R., MISRA, K.C. and NAIK, R.K. (2004) Age of granitic activity associated with copper-molybdenum mineralization at Malanjkhand, Central India. Mineralium Deposita, v.39, pp.670-677.

  • PASSCHIER, C.W. and TROUW, R.A.J. (2005) Microtectonics. 2nd Edition, Springer-Verlag, Berlin, Heidelberg.

  • PFIFFNER, O.A. and RAMSAY, J.G. (1982) Constraints on geological strain rates; arguments from finite strain states of naturally deformed rocks. Jour. Geophy. Res., v.87 (B1), pp.311-321.

  • PIAZOLO, S., BONS, P.D., JESSELL, M.W., EVANS, L. and PASSCHIER, C.W. (2002) Dominance of microstructural processes and their effect on microstructural development: insights from numerical modeling of dynamic recrystallisation. In: S. de Meer, M.R. Drury, J.H.P. de Bresser and G.M. Pennock (Eds.), Deformation Mechanisms, Rheology and Tectonics: Current Status and Future Perspectives. Geol. Soc. London, Spec. Publ., no.200, pp.149-170.

  • SEN, K., MAJUMDER, S. and MAMTANI, M.A. (2005) Degree of magnetic anisotropy as a strain intensity gauge in ferromagnetic granites. Jour. Geol. Soc., London, v.162, pp.583-586.

  • SEN, K. and MAMTANI, M.A. (2006) Magnetic fabric, shape preferred orientation and regional strain in granitic rocks. Jour. Struct. Geol., v.28, pp.1870-1882.

  • STEIN, H.J., HANNAH., J.L., ZIMMERMAN,A., MARKEY, R.J., SARKAR, S.C. and PAL, A.B. (2004) A 2.5 Ga porphyry Cu-Mo-Au deposit at Malanjkhand, central India: implications for Late Archean continental assembly. Precambrian Res., v.134, pp.189-226.

  • STIPP, M., STUNITZ, H., HEILBRONNER, R. and SCHMID, S.M. (2002a) The eastern Tonale fault zone: a "natural laboratory" for crystal plastic deformation of quartz over a temperature range from 250 to 700°C. Jour. Struct. Geol., v.24, pp.1861-1884.

  • STIPP, M., STUNITZ, H., HEILBRONNER, R. and SCHMID, S.M. (2002b) Dynamic recrystallisation of quartz: correlation between natural and experimental conditions. In: S. de Meer, M.R. Drury, J.H.P. de Bresser, and G.M. Pennock (Eds.), Deformation Mechanisms, Rheology and Tectonics: Current Status and Future Perspectives. Geol. Soc. London Spec. Publ. no.200, pp.171-190.

  • TAKAHASHI, M., NAGAHAMA, H., MASUDA, T. and FUJIMURA, A. (1998) Fractal analysis of experimentally, dynamically recrystallized quartz grains and its possible application as a e & meter. Jour. Struct. Geol., v.20, pp.269-275.

  • TWISS, R.J. and MOORES, E.M. (2007) Structural Geology, 2nd Edition,W.H. Freeman and Company, New York.

  • VERNON, R.H. (2004) A Practial Guide to Rock Microstructure. Cambridge Univ. Press, Cambridge.

  • VIGNERESSE, J.L. (2004) Rheology of a two-phase material with applications to partially molten rocks, plastic deformation and saturated soils. In: G.I. Alsop, R.E. Holdworth, K.J.W. McCaffrey and M. Hand (Eds.), Flow Processes in Faults and Shear Zones, Geol. Soc., London Spec. Publ., no.224, pp.79- 94.

  • VIGNERESSE, J.L. (2008) Granitic batholiths: from pervasive and continuous melting in the lower crust to discontinuous and spaced plutonism in the upper crust. Trans. Royal Soc. Edinburgh: Earth Sci., v.97, pp.311-324.

  • YEDEKAR, D.B., JAIN, S.C., NAIR, K.K.K. and DUTTA, K.K. (1990) The central Indian collision suture. Geol. Surv. India Spec. Publ., no.28, pp. 1-43.


Abstract Views: 171

PDF Views: 0




  • Strain-Rate Estimation Using Fractal Analysis of Quartz Grains in Naturally Deformed Rocks

Abstract Views: 171  |  PDF Views: 0

Authors

Manish A. Mamtani
Department of Geology and Geophysics, Indian Institute of Technology, Kharagpur - 721302, West Bengal, India

Abstract


The area-perimeter fractal dimension (D) of quartz grains has earlier been proposed as a strain-rate gauge based on experimental deformation of quartz aggregates. To test the application in naturally deformed rocks, D is calculated in (a) three quartzites belonging to the Lunavada Group of rocks (Aravalli Mountain Belt, NW India) that developed textures between 420-600°C and (b) one quartz reef sample from the Malanjkhand Granite (Central India), which underwent dynamic recrystallization between 250-400°C. Using the above T ranges and calculated D values, strain-rates are calculated for the two sets of samples. A 10-12.7 s-1 strain rate at 250°C is calculated for the quartz reef sample. However, at higher temperatures the calculated strain-rate is >10-10 s-1 for the quartz reef and the quartzite samples. The quartzites show evidence of dynamic recrystallization by grain boundary migration (GBM) and subgrain rotation (SGR), while the quartz reef is replete with evidence of bulging (BLG) recrystallization. T and calculated strainrates are plotted on available recrystallization map of quartz. It is demonstrated that whilst the T/strain-rate of the quartzites does not fall in the region of GBM and SGR, the T/strain-rate of the quartz reef falls in the BLG region. The problems with strain-rate calculations using area perimeter fractal dimension are discussed. It is concluded that the method of strain-rate calculation can be used only for lower T.

Keywords


Strain-Rate, Fractals, Quartz, Deformation.

References