Journal of Surface Science and Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

A Review on Important Factors Affecting Dry Sliding Friction


Affiliations
1 Department of Mechanical Engineering, Adhi College of Engineering and Technology, Affliated to Anna University, Kanchipuram - 631 605, Tamil Nadu, India
     

   Subscribe/Renew Journal


Friction is the resistance faced by one body when it slides or rolls over another body. The friction is not a property of material. It is a response observed during sliding or moving. The maximum friction is required in some applications such as automobile tires on the road, machining the materials, brakes, clutches etc., Alternatively, the friction should be low in some applications like bearings, sliding parts of machineries etc., Most of material failure is occurred due to improper observation of friction and wear behaviors. Hence, understanding of the frictional behaviors of various metal pairs is essential to design any engineering tools and equipment. Therefore, in this paper, the important factors affecting the sliding friction are described in detail.

Keywords

Different Metal Pairs, Friction, Important Factor, Vacuum.
Subscription Login to verify subscription
User
Notifications
Font Size


  • N. P. Suh, Tribophysics, Prentice-Hall, Inc., Englewood Cliffs, New Jersey (1986).

  • B. Bhushan, Principles and Applications of Tribology, A Wiley- Interscience Publication, John wiley & sons, Inc., New York (1999).

  • E. Rabinowicz, Friction and Wear of Materials, Second edition, Wiley, New York (1995).

  • J. R. Whitehead, ‘Surface deformation and friction of metals at light loads’, in Proc. Roy. Soc. London. A., 201, 109 (1950).

  • P. J. Blau, Friction, lubrication, and Wear Technology, ASM Handbook, 18, Metals park, Ohio (1992).

  • E. Rabinowicz, ASLE Transactions, 14, 198 (1971).

  • D. H. Buckley, Surface effects in Adhesion, Friction, Wear and Lubrication, Elsevier Scientific Publishing Company, New York, USA (1981).

  • B. Bhushan, ASME. J. Lub. Tech., 102, 201 (1999).

  • D. K. Karupannasamy, M. B. De Rooji and D. J. Schipper, Wear, 308, 222 (2013).

  • J. F. Archard, ‘Elastic deformation and the laws of friction’, in Proc. R. Soc. London (1957).

  • K. Holmberg, A. Laukkanen, H. Ronkainen, R. Waudby, G Stachowiak, M Wolski, P Podsiadlo, M Gee, J Nunn and Carsten, Wear, 330–331, 3 (2015).

  • F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Part-I, Clarendon Press, Oxford (1950).

  • J. V. Reid and J. A. Schey, Wear, 118, 113 (1987).

  • A. Devaraju, A. Elayaperumal, S. Venugopal, V. Satish V. Kailas. and J. Alphonsa, Surf. Coat. Tech., 207, 406 (2012).

  • M. O. A. Mokhtar, Wear, 78, 297 (1982).

  • G. Bregliozzi, A. D. Schino, J. M. Kenny and H. Haefke, Mater. Lett., 57, 4505 (2003).

  • Z. B. Wang, N. R. Taao, S. Li, W. Wang, G. Liu, J. Lu and K. Lu, Mater. Sci. and Eng. A., 352, 144 (2003).

  • A. Amanov, Y.-S. Pyun and S. Sasaki, Tribo. Int., 72, 187 (2014).

  • R. Nafar Dehsorkhi, S. Sabooni, F. Karimzadeh, A. Rezaeian and M. H. Enayati, Mat. Des., 64, 56 (2014).

  • M. O. A. Mokhtar, M. Zaki and G. S. A. Shawki, Wear, 65, 29 (1980).

  • R. C. Bill and D. Wisander, Wear, 41, 351 (1977).

  • F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Part-II, Clarendon Press, Oxford (1964).

  • W. K. Lee and H. Jang, Wear, 306, 17 (2013).

  • K. Endo and H. Goto, Wear, 48, 347 (1978).

  • L. F. Coffin, Lub. Eng., 3, 50–59 (1956).

  • F. P. Bowden and K. E. W. Rowe, The physical properties of surfaces, III- The surface temperature of sliding metals, the temperature of lubricates surfaces’, in Proc. Roy. Soc. A (1936).

  • K. I. Jonson and D. V. Kellor, J. Appl. Phys., 38, 1896 (1967).

  • Y. Tsuya, Tech. Rep. of Mech. Eng. Lab., Japan, 3 (1975).

  • A. Devaraju, A. Elayaperumal, S. Venugopal, V. Satish V. Kailas. and J. Alphonsa, Wear, 288, 17 (2012).

  • K. Hiratsuka, A. Enomoto and T. Sasada, Wear, 153, 361 (1992).

  • F. P. Bowden and G. W. Ridler, ‘The adhesion of clean metals’, in Proc. Roy. Soc. A (1956).

  • F. F. Ling and T. E. Simkins, ASME. J. Basic Eng., 85, 481 (1963).

  • D. H. Buckley and R. Johnson, Wear, 11, 405 (1968).

  • K. Miyoshi and D. H. Buckley, ‘Friction and wear with a single crystal abrasive grit of silicon carbide- Effect of shear strength of metal’, NASA Technical Paper 1293 (1978).


Abstract Views: 394

PDF Views: 3




  • A Review on Important Factors Affecting Dry Sliding Friction

Abstract Views: 394  |  PDF Views: 3

Authors

A. Devaraju
Department of Mechanical Engineering, Adhi College of Engineering and Technology, Affliated to Anna University, Kanchipuram - 631 605, Tamil Nadu, India

Abstract


Friction is the resistance faced by one body when it slides or rolls over another body. The friction is not a property of material. It is a response observed during sliding or moving. The maximum friction is required in some applications such as automobile tires on the road, machining the materials, brakes, clutches etc., Alternatively, the friction should be low in some applications like bearings, sliding parts of machineries etc., Most of material failure is occurred due to improper observation of friction and wear behaviors. Hence, understanding of the frictional behaviors of various metal pairs is essential to design any engineering tools and equipment. Therefore, in this paper, the important factors affecting the sliding friction are described in detail.

Keywords


Different Metal Pairs, Friction, Important Factor, Vacuum.

References





DOI: https://doi.org/10.18311/jsst%2F2016%2F7751