Open Access
Subscription Access
Open Access
Subscription Access
Binder-Free Locally Developed Activated Carbon Powder Based Electrode for Supercapacitor
Subscribe/Renew Journal
Nowadays, new technologies try to generate more energy to satisfy the demand of electricity. Therefore, storage of generated energy is becoming a highly important task. It is well known that the supercapacitors and batteries play a major role in the field of energy storage. When considering those options for storage electricity, supercapacitors were able to replace most of the capabilities encompassed in batteries and conventional capacitors with high energy density and the power density. In this research article, fabricating a novel supercapacitor using local coconut shell charcoal was discussed. It was focused on improving its performances without using a binder compound while keeping the fabrication process simple and inexpensive. Activated carbon powder used to fabricate the supercapacitor in this research was made from local coconut shell charcoal which was activated using steam activation method. The electrodes were fabricated as an electrode slurry made of activated carbon powder mixed with potassium hydroxide (KOH). It is found that the highest specific capacitance could obtain from the supercapacitor was 137 F/g. Charge-discharge curve indicated a power density of 42.6 Wkg-1 and energy density of 14.58 Whkg-1 which was a remarkable improvement for a supercapacitor fabricated without a binder compound.
Keywords
Activated Carbon Powder, Aqueous Electrolyte, Cyclic Voltammetry, Electrochemical Impedance, Supercapacitors.
User
Subscription
Login to verify subscription
Font Size
Information
- G. Gouy, J. Phys. 9, 457, 1910.
- D. L. Chapman, “A contribution to the theory of electro-capillarity,” Philosophical Magazine Series 6, vol. 25, no. 148, pp. 475-481, 1913.
- J. H. Choi, “Fabrication of a carbon electrode using activated carbon powder and application to the capacitive deionization process,” Separation and Purification Technology, vol. 70, no. 3, pp. 362-366, 2010.
- D. Qu, “Studies of the activated carbons used in double-layer supercapacitors,” Journal of Power Sources, vol.109, no. 2, pp. 403-411, 2002.
- A. Burke, “R&D considerations for the performance and application of electrochemical capacitors,” Electrochimica Acta, vol. 53, no. 3, pp. 1083-1091, 2007.
- M. Galinski, A. Lewandowski, and I. Stępniak, “Ionic liquids as electrolytes,” Electrochimica Acta, vol. 51, no. 26, pp. 5567-5580, 2006.
- E. Frackowiak, “Carbon materials for supercapacitor application,” Physical Chemistry Chemical Physics, vol. 9, no. 15, pp. 1774-1785, 2007.
- T. Chen, and L. Dai, “Carbon nanomaterials for high-performance supercapacitors,” Materials Today, vol. 16, no. 7, pp. 272-280, 2013.
- Y. Wang, and Y. Xia, “Recent progress in supercapacitors: From materials design to system construction,” Advanced Materials, vol. 25, no. 37, pp. 5336-5342, 2013.
- X. Wang, D. Wang, and J. Liang, “Performance of electric double layer capacitors using active carbons prepared from petroleum coke by KOH and vapor reetching,” Journal of Materials Science and Technology, vol. 19, no. 3, pp. 265-269, 2003.
- W. Wang, S. Guo, M. Penchev, I. Ruiz, K. N. Bozhilov, D. Yan, M. Ozkan, and C. S. Ozkan, “Three dimensional few layer graphene and carbon nanotube foam architectures for high fidelity supercapacitors,” Nano Energy, vol. 2, no. 2, pp. 294-303, 2013.
- Z. Wen, X. Wang, S. Mao, Z. Bo, H. Kim, S. Cui, G.Lu, X. Feng, and J. Chen, “Crumpled nitrogen-doped graphene nanosheets with ultrahigh pore volume for high-performance supercapacitor,” Advanced Materials, vol. 24, no. 41, pp. 5610-5616, 2012.
- C. W. Huang, C. H. Hsu, P. L. Kuo, C. T. Hsieh, and H.Teng, “Mesoporous carbon spheres grafted with carbon nanofibers for high-rate electric double layer capacitors,” Carbon, vol. 49, no. 3, pp. 895-903, 2011.
- C. W. Huang, C. M. Chuang, J. M. Ting, and H. Teng, “Significantly enhanced charge conduction in electric double layer capacitors using carbon nanotube-grafted activated carbon electrodes,” Journal of Power Sources, vol. 183, no. 1, pp. 406-410, 2008.
Abstract Views: 325
PDF Views: 4