Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Numerical Studies on the Effect of Various Parameters on Wrinkling in Deep Drawing of Cylindrical Cups


Affiliations
1 Department of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
2 Department of Mechanical Engg., JNTU College of Engg., Hyderabad, India
     

   Subscribe/Renew Journal


Deep drawing is the process of converting a blank into cup shaped articles like kitchen sinks, utensils, fountain pen caps etc. Wrinkles and fracture are the major defects in deep drawn products. Wrinkles occur at flange as well as the sidewalls of a deep drawn cup. The main reason for wrinkles is inadequate blank holding force. However excessive blank holding force results in fracture. The aim of this work is to arrive at optimum blank holding force in order to produce wrinkle free products. In this work numerical simulations are conducted by considering five different parameters namely punch radius, die radius, clearance, coefficient of friction and Punch diameter using finite element explicit solver LSDYNA. Modeling of the set up is done using hyper mesh. In this work simulations are carried out as per L-27 orthogonal array suggested by Taguchi. A combination of finite element method and Taguchi analysis is used to determine the influence of process parameters in deep drawing.

Keywords

Deep Drawing, Blank Holding Force, Wrinkling, Taguchi Approach, LSDYNA.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 326

PDF Views: 1




  • Numerical Studies on the Effect of Various Parameters on Wrinkling in Deep Drawing of Cylindrical Cups

Abstract Views: 326  |  PDF Views: 1

Authors

B. V. S. Rao
Department of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
G. Chandra Mohan Reddy
Department of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
G. Krishna Mohan Rao
Department of Mechanical Engg., JNTU College of Engg., Hyderabad, India
P. V. R. Ravindra Reddy
Department of Mechanical Engg., CBIT, Gandipet, Hyderabad, India

Abstract


Deep drawing is the process of converting a blank into cup shaped articles like kitchen sinks, utensils, fountain pen caps etc. Wrinkles and fracture are the major defects in deep drawn products. Wrinkles occur at flange as well as the sidewalls of a deep drawn cup. The main reason for wrinkles is inadequate blank holding force. However excessive blank holding force results in fracture. The aim of this work is to arrive at optimum blank holding force in order to produce wrinkle free products. In this work numerical simulations are conducted by considering five different parameters namely punch radius, die radius, clearance, coefficient of friction and Punch diameter using finite element explicit solver LSDYNA. Modeling of the set up is done using hyper mesh. In this work simulations are carried out as per L-27 orthogonal array suggested by Taguchi. A combination of finite element method and Taguchi analysis is used to determine the influence of process parameters in deep drawing.

Keywords


Deep Drawing, Blank Holding Force, Wrinkling, Taguchi Approach, LSDYNA.