Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Investigation on Micro-End Milling of Cast Grade Virgin PMMA


Affiliations
1 Department of Production Engineering, National institute of Technology, Tiruchirappalli, India
     

   Subscribe/Renew Journal


This paper presents an experimental study on effect of micro end milling process parameters on surface roughness with PMMA (Poly methyl methacrylate) as work piece material. It has wide applications in micro features and micro parts fabrication for automobile, aerospace, biomedical industries. Effect on surface finish during micro end milling on PMMA with 0.7mm carbide end mill tool was analyzed in this work. Response Surface Methodology (RSM) technique used for design of experiments for the factors feed rate and spindle speed. Experiments were carried out using multipurpose micro machine tool. Analysis was carried out with surface roughness value measured using surface roughness tester and inferences were made.


Keywords

Micro End Milling, PMMA, Response Surface Methodology, Surface Roughness.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 199

PDF Views: 0




  • Experimental Investigation on Micro-End Milling of Cast Grade Virgin PMMA

Abstract Views: 199  |  PDF Views: 0

Authors

S. P. Leo Kumar
Department of Production Engineering, National institute of Technology, Tiruchirappalli, India
J. Jerald
Department of Production Engineering, National institute of Technology, Tiruchirappalli, India
S. Kumanan
Department of Production Engineering, National institute of Technology, Tiruchirappalli, India
R. Nargundkar Aniket
Department of Production Engineering, National institute of Technology, Tiruchirappalli, India

Abstract


This paper presents an experimental study on effect of micro end milling process parameters on surface roughness with PMMA (Poly methyl methacrylate) as work piece material. It has wide applications in micro features and micro parts fabrication for automobile, aerospace, biomedical industries. Effect on surface finish during micro end milling on PMMA with 0.7mm carbide end mill tool was analyzed in this work. Response Surface Methodology (RSM) technique used for design of experiments for the factors feed rate and spindle speed. Experiments were carried out using multipurpose micro machine tool. Analysis was carried out with surface roughness value measured using surface roughness tester and inferences were made.


Keywords


Micro End Milling, PMMA, Response Surface Methodology, Surface Roughness.