Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Vectoring Tests on Flex Nozzle System of Solid Rocket Motor Using Electro Mechanical Actuators


Affiliations
1 Advanced Systems Laboratory, Kanchanbagh, Hyderabad, India
     

   Subscribe/Renew Journal


Vectoring tests are carried out on each flex nozzle system of a rocket motor to verify the performance of flex seal using Electro Mechanical actuators, mirror image sensors and electronic controller. These tests are done for acceptance of the flex nozzle control system in the missile. The flex nozzle controls are tested for sine, ramp, frequency, response commands. During the tests the Command, Pitch, Average, Main Voltages are recorded using DAC. The flex nozzle system is integrated to the pressure chamber in horizontal condition and the Electro Mechanical actuators and mirror image sensors are assembled to the flex nozzle systems. The Electro Mechanical actuators are connected to the battery or 70V power supply to operate the actuators. Then the vectoring tests are performed using the Electro Mechanical actuators. LVDT'S are mounted on nozzle for displacement measurement. The chamber is pressurized pneumatically up to 2 bar.

Keywords

Flex Nozzle System, Electro Mechanical Actuators, Vectoring Tests, Digital Controllers.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Sutton, George P: Rocket Propulsion Elements, Inter science Publication John Wiley & Sons Inc, 8th Edition January 2010.

  • Ray, SK: Missile Control Systems, DESIDOC Publications, New Delhi, 2007.

  • Ram Mohan CH. V; Ramanathan, J; Satish Kumar; Gupta, AVSSKS: Characterization of materials used in Flex bearing of Large Solid Rocket Motors, 'Defence science Journal', vol. 61, no. 3 May 2011, 264-269.

  • Scott C, Asbury; Jeffrey A, Yetter: Static Performance of Six Innovative Thrust Reverser Concepts for Subsonic Transport Applications, DIANE Publishing, 1-2, ISBN- 978-1-4289-9643-4, 10th July 2013.

  • Megysey Eugene F: Pressure Vessel Hand book, PV publishing INC. Oklahoma City, USA, 14th edition.

  • Kadam, NV: Practical Design of Flex Control System for Launch Electro Mechanical Vehicle & Missiles, Allied Publishers Pvt. Ltd, Jan 2006.

  • Maclsaue, Bernie; Langton, Roy: Gas Turbine Propulsion System, John Wiley & Sons, 152-155, ISBN 978-0-470-0653-1.

  • Kuphaldt, Tony R: Lesson in Electrical circuits, vol. 4, Chapter-6 Ladder Logic, September 2010.

  • Brady, Ian: Programmable Logic Controllers Benefits & applications PLCS”, 5th December, 2011.

  • Balakrishna, R: Guided Weapons System Design, DESIDOC Publications, New Delhi, 1998 ◘


Abstract Views: 581

PDF Views: 4




  • Vectoring Tests on Flex Nozzle System of Solid Rocket Motor Using Electro Mechanical Actuators

Abstract Views: 581  |  PDF Views: 4

Authors

N. Kishore Nath
Advanced Systems Laboratory, Kanchanbagh, Hyderabad, India
B. Dinesh Kumar
Advanced Systems Laboratory, Kanchanbagh, Hyderabad, India

Abstract


Vectoring tests are carried out on each flex nozzle system of a rocket motor to verify the performance of flex seal using Electro Mechanical actuators, mirror image sensors and electronic controller. These tests are done for acceptance of the flex nozzle control system in the missile. The flex nozzle controls are tested for sine, ramp, frequency, response commands. During the tests the Command, Pitch, Average, Main Voltages are recorded using DAC. The flex nozzle system is integrated to the pressure chamber in horizontal condition and the Electro Mechanical actuators and mirror image sensors are assembled to the flex nozzle systems. The Electro Mechanical actuators are connected to the battery or 70V power supply to operate the actuators. Then the vectoring tests are performed using the Electro Mechanical actuators. LVDT'S are mounted on nozzle for displacement measurement. The chamber is pressurized pneumatically up to 2 bar.

Keywords


Flex Nozzle System, Electro Mechanical Actuators, Vectoring Tests, Digital Controllers.

References