Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Sensitivity Analysis of Surface Roughness of AISI 1040 Carbon Steel in Dry Turning Operation with PVD Tool Using Taguchi Method


Affiliations
1 Sri Venkateswara University, College of Engineering, Tirupati, India
2 Swarnadhra College of Engineering, Narasapur, Andhra Pradesh, India
     

   Subscribe/Renew Journal


The present study is concentrated with orthogonal cutting of AISI 1040 carbon steel under dry turning conditions with PVD coated cemented carbide inserts. This paper presents the influence of cutting parameters on the surface roughness of carbon steels of AISI 1040 series. The investigations are carried out by conducting experiments based on Taguchi technique considering L27 orthogonal array. The investigations consists of surface roughness of the material under hot and cold conditions, this aspect is studied due to variation of temperature during turning process showing the affects of online monitoring of tool surface roughness. The other general investigations are signal to noise ratio and analysis of variance are employed to the parameters such as Material removal Rate (MRR). Finally, sensitivity analysis is carried out on most influenced cutting parameter to predict the surface roughness by obtaining the absolute fraction of variance.

Keywords

PVD, CVD, Taguchi and Sensitivity.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 223

PDF Views: 1




  • Sensitivity Analysis of Surface Roughness of AISI 1040 Carbon Steel in Dry Turning Operation with PVD Tool Using Taguchi Method

Abstract Views: 223  |  PDF Views: 1

Authors

V. Diwakar Reddy
Sri Venkateswara University, College of Engineering, Tirupati, India
D. Bhanu Prakash
Swarnadhra College of Engineering, Narasapur, Andhra Pradesh, India
G. Bhanodaya Reddy
Sri Venkateswara University, College of Engineering, Tirupati, India
G. Krishnaiah
Sri Venkateswara University, College of Engineering, Tirupati, India

Abstract


The present study is concentrated with orthogonal cutting of AISI 1040 carbon steel under dry turning conditions with PVD coated cemented carbide inserts. This paper presents the influence of cutting parameters on the surface roughness of carbon steels of AISI 1040 series. The investigations are carried out by conducting experiments based on Taguchi technique considering L27 orthogonal array. The investigations consists of surface roughness of the material under hot and cold conditions, this aspect is studied due to variation of temperature during turning process showing the affects of online monitoring of tool surface roughness. The other general investigations are signal to noise ratio and analysis of variance are employed to the parameters such as Material removal Rate (MRR). Finally, sensitivity analysis is carried out on most influenced cutting parameter to predict the surface roughness by obtaining the absolute fraction of variance.

Keywords


PVD, CVD, Taguchi and Sensitivity.