Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of B4C Whisker on Mechanical Properties and Micro Hardness of AL 6061/SiC Metal Matrix Composite


Affiliations
1 Dept of Mech Engg, QIS College of Engg & Technology, Ongole, AP, India
2 Prof. of Mech Engg, Annamacharya Institute of Technology and Sciences, Tirupati, AP, India
3 Dept. of Mech Engg, JNTUA College of Engg, Kalikiri, Chittoor (Dist), AP, India
     

   Subscribe/Renew Journal


Mechanical properties such as strength, stiffness, toughness and micro hardness of metal matrix composites are finding challenging applications in aerospace, military and automobile industry. Among all metal matrix composites aluminium metal matrix has been the best explored metal for the development of metal matrix composites. The mechanical properties of metal matrix composites have been improved by reinforcing the whiskers to the Aluminium metal matrix. In the present study, efforts were made to fabricate metal matrix composites by keeping the composition of Al 6061 matrix constant and varying the reinforcement ratios of SiC viz. 5%, 10% and 15 % by weight to the matrix with or without addition of 2 wt% of B4C. The samples were prepared as per ASTM E08 standard size and tested under tensile loading and micro hardness for investigating the tensile strength, yield strength, and micro hardness. The test results show that with addition of B4C whisker to the Al 6061/SiC metal matrix composite gives an increment in tensile strength by 13.95%, yield strength by 10.54% and micro hardness by 4.61% increment.

Keywords

Metal Matrix Composites (MMCs), SiC, AL 6061/B4C, ASTM E08, Tensile strength, Yield strength, Micro Hardness.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Kesavan, R; Subramanya Reddy, P: Investigation of mechanical properties of Aluminium metal matrix composite (Al-Al2O3-SiC), ‘International Journal of Advanced Research in Science, Engineering and Technology’, vol. 2, no. 10, October 2015, 889-893.

  • Nallusamy, YS; Karthikeyan, A: Analysis of wear resistance, cracks and hardness of metal matrix composites with SiC additives and Al2O3 as reinforcement, ‘Indian Journal of Science and Technology’, vol. 9, no. 35, September 2016, 1-6.

  • Tee, K L; Lu, L; Lai, M O: In situ processing of Al-TiB2 composite by the stir-casting technique, ‘Journal of Materials Processing Technology’, vol. 89-90, May 1999, 513-519.

  • Jayashree, P K; Gowri Shankar, M C; Achutha Kini; Sharma S S; Raviraj Shetty: Review on effect of Silicon Carbide (Sic) on stir cast Aluminium metal matrix composites, ‘International Journal of Current Engineering and Technology’, vol.3, no. 3, August 2013, 1061-1071.

  • Serajul, Haque; Akthar Hussain, Ansari; Prem Kumar, Bharti: Effect of Process Parameters on wear Rate of Al6061-Cu Reinforced SiCp Metal Matrix Composites, ‘Journal of Materials and Environmental Science, vol. 5, no. 5, 2014, 1485-1489.

  • Rajashekhar; Mohammed Naveed; Anwar Khan, A R: Studies on effect of heat treatment on mechanical properties of hybrid aluminum matrix composites, ‘International Journal of Innovative Research in Science, Engineering and Technology’, vol. 2, no. 11, November 2013, 6150-6157.

  • Rajasekhar, Sivapuram; Hariprasada Reddy, Yedula; Chandra Mohana Reddy, Baggidi: An experimental investigation on tensile properties and energy absorption capabilities of hybrid nano metal matrix (Al6061+B4c+Sic) composites, ‘International Journal of Advances in Engineering & Technology’, vol. 10, no. 2, April 2017, 192-200.

  • Yovanovich, M M: Micro and macro hardness measurements, correlations, and contact models, ‘44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada’, 9-12 January 2006, 1-28.

  • Velmurugan, C; Subramanian, R; Thirugnanam, R; Kannan, T; Anandavel, B: Experimental study on the effect of Sic and Graphite particles on weight loss of Al 6061 hybrid composite materials, Journal of Technology and Science Education, Nova Science Publishers, Inc., vol. 2, no. 1/2, January 2011, 49-68.

  • Rajasekhar, Sivapuram; Hariprasada Reddy, Yedula; Chandra Mohana Reddy, Baggidi: A comparative analysis on energy absorption capabilities of epoxy e-glass and epoxy carbon fibers, ‘International Journal of Advanced Research and Innovative Ideas in Education’, vol. 3, no. 3, 2017, 1469-1474.

  • Gopal Krishna, U B; Sreenivas Rao, K V; Vasudeva, B: Effect of percentage reinforcement of B4C on the tensile property of aluminium matrix composites, ‘International Journal of Mechanical Engineering and Robotics Research’, Vol.1, No.3, October 2012, 290-295.

  • Shaikshavali, G; Venugopal Goud, E; Murali Mohan, M: Mechanical properties of Al 6061 based metal matrix composites reinforced with ceramic particulates and effect of age hardening on its tensile characteristics, ‘International Journal of Engineering Research and General Science’, vol. 4, no. 2, March-April,2016, 726-731.

  • Veeresh Kumar, G B; Rao, C S P; Selvaraj, N; Bhagyashekar, M S: Studies on Al6061SiC and Al7075-Al2O3 metal matrix composites, ‘Journal of Minerals & Materials Characterization & Engineering’, vol. 9, no. 1, 2010, 43-55.

  • Devaraju, Aruri; Kumar, Adepu; Kumaraswamy, Adepu; Kotiveerachari Bazavada: Wear and mechanical

  • properties of 6061-T6 Aluminium alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing, ‘Journal of Materials Research and Technology’, vol. 2, no. 4, October-December 2013, 362-369.


Abstract Views: 230

PDF Views: 6




  • Effect of B4C Whisker on Mechanical Properties and Micro Hardness of AL 6061/SiC Metal Matrix Composite

Abstract Views: 230  |  PDF Views: 6

Authors

Rajasekhar Sivapuram
Dept of Mech Engg, QIS College of Engg & Technology, Ongole, AP, India
Hariprasada Reddy Yedula
Prof. of Mech Engg, Annamacharya Institute of Technology and Sciences, Tirupati, AP, India
Chandra Mohana Reddy Baggidi
Dept. of Mech Engg, JNTUA College of Engg, Kalikiri, Chittoor (Dist), AP, India

Abstract


Mechanical properties such as strength, stiffness, toughness and micro hardness of metal matrix composites are finding challenging applications in aerospace, military and automobile industry. Among all metal matrix composites aluminium metal matrix has been the best explored metal for the development of metal matrix composites. The mechanical properties of metal matrix composites have been improved by reinforcing the whiskers to the Aluminium metal matrix. In the present study, efforts were made to fabricate metal matrix composites by keeping the composition of Al 6061 matrix constant and varying the reinforcement ratios of SiC viz. 5%, 10% and 15 % by weight to the matrix with or without addition of 2 wt% of B4C. The samples were prepared as per ASTM E08 standard size and tested under tensile loading and micro hardness for investigating the tensile strength, yield strength, and micro hardness. The test results show that with addition of B4C whisker to the Al 6061/SiC metal matrix composite gives an increment in tensile strength by 13.95%, yield strength by 10.54% and micro hardness by 4.61% increment.

Keywords


Metal Matrix Composites (MMCs), SiC, AL 6061/B4C, ASTM E08, Tensile strength, Yield strength, Micro Hardness.

References