Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Analysis of Regenerative Chatter in Turning


Affiliations
1 K. L. Coilege of Engg., Vaddeswaram, Guntur (Dist), Andhra Pradesh, India
2 Dept, of Mechanical Engg., NUY University, South Korea, United States
3 Dept. of Indl. and Production Engg., K. L. College of Engg., Vaddeswaram, Guntur (Dist), Andhra Pradesh, India
4 Dept. of Mechanical Engg., RVR & JC College of Engg., Chodawaram, Guntur (Dist), Andhra Pradesh, India
     

   Subscribe/Renew Journal


This paper presents effects of various cutting conditions (such as Velocity, Feed, Depth of cut), and tool geometry (such as Side Cutting Edge angle. Inclination angle. Rake angle), overhanging distance of work piece and over hanging distance of tool on regenerative chatter (Self excited vibrations) in turning process. A low mass accelerometer is placed at the tool-tip of the assembly and the system is excited at the same point by using an impulse hammer to obtain the tool-point frequency response function through spectrum analyzer or modal testing software. New test is performed when tool-overhang length changes or for different combination of system components. Regarding the analytical aspects, have to obtain any model of cutting process.This paper also presents mathematical modelling for better understanding the relationship between various cutting conditions, cutting forces and vibrations in turning machines.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 236

PDF Views: 0




  • Analysis of Regenerative Chatter in Turning

Abstract Views: 236  |  PDF Views: 0

Authors

K. Rama Kotaiah
K. L. Coilege of Engg., Vaddeswaram, Guntur (Dist), Andhra Pradesh, India
J. Srinivas
Dept, of Mechanical Engg., NUY University, South Korea, United States
K. J. Babu
Dept. of Indl. and Production Engg., K. L. College of Engg., Vaddeswaram, Guntur (Dist), Andhra Pradesh, India
Srinivas Kolla
Dept. of Mechanical Engg., RVR & JC College of Engg., Chodawaram, Guntur (Dist), Andhra Pradesh, India

Abstract


This paper presents effects of various cutting conditions (such as Velocity, Feed, Depth of cut), and tool geometry (such as Side Cutting Edge angle. Inclination angle. Rake angle), overhanging distance of work piece and over hanging distance of tool on regenerative chatter (Self excited vibrations) in turning process. A low mass accelerometer is placed at the tool-tip of the assembly and the system is excited at the same point by using an impulse hammer to obtain the tool-point frequency response function through spectrum analyzer or modal testing software. New test is performed when tool-overhang length changes or for different combination of system components. Regarding the analytical aspects, have to obtain any model of cutting process.This paper also presents mathematical modelling for better understanding the relationship between various cutting conditions, cutting forces and vibrations in turning machines.