Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Investigation for Optimization of CNC-Wire Cut EDM Parameters for Better Surface Finish During Machining of Pral/SIC-MMc


Affiliations
1 Mech. Engg. Deptt., Punjab Engineering College, Chandigarh-160012, India
2 Production Engineering Department, Jadavpur University, Kolkata-700032, India
     

   Subscribe/Renew Journal


In this investigation, Taguchi method is used to optimize the CNC-Wire cut-EDM parameters for effective machining of Ai-SiC MMC. From experimental results and through analysis of variance (ANOVA) and 'F' test values the significant factors are determined for surface roughness. Mathematical model relating to the machining performance criteria e.g. surface finish is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of AI/SiC-MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 210

PDF Views: 0




  • Experimental Investigation for Optimization of CNC-Wire Cut EDM Parameters for Better Surface Finish During Machining of Pral/SIC-MMc

Abstract Views: 210  |  PDF Views: 0

Authors

A. Manna
Mech. Engg. Deptt., Punjab Engineering College, Chandigarh-160012, India
B. Bhattacharya
Production Engineering Department, Jadavpur University, Kolkata-700032, India

Abstract


In this investigation, Taguchi method is used to optimize the CNC-Wire cut-EDM parameters for effective machining of Ai-SiC MMC. From experimental results and through analysis of variance (ANOVA) and 'F' test values the significant factors are determined for surface roughness. Mathematical model relating to the machining performance criteria e.g. surface finish is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of AI/SiC-MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.