Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Optimization of Process Parameters in Drilling of AMMC Using Sine Cosine Algorithm


Affiliations
1 Department of Mechanical Engineering, S.V. University, Tirupati, India
     

   Subscribe/Renew Journal


Composite materials are important engineering materials due to their outstanding mechanical properties. Aluminium materials are widely used to take advantage of their low density, corrosion resistance and combination of strength and formability, especially in the automobile and aerospace industries for light weight applications. In the present work Al 6101 is reinforced with B4C (8% wt) the AMMC have been prepared by using stir casting process. In this work we are studying how the helix angle of drill bit will Influence on the output responses of Drilling. Optimum levels of process parameters are identified by sine cosine algorithm (SCA).

Keywords

AMMC, Drilling, Sine Cosine Algorithm.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Shigeo, Zaima; Akiyasu, Yuki; Susumu, Kamo: Influence of Helix Angle of twist drill on wrought aluminium, 'Journal of Japan institute of light metals.', vol. 17, no. 5, September 1967.

  • Balaji, M; Murthy, BSN; Mohan Rao, N: Optimization of Cutting Parameters in Drilling Of AISI 304 Stainless Steel Using Taguchi and ANOVA, Global Colloquium in Recent Advancement and Effectual Researches in Engineering, Science and Technology (RAEREST 2016), 'Procedia Technology', vol. 25, 2016.

  • Narasimha, K; Osman, M O M; Chandrashekhar, S; Frazao, J: An Investigation into the Influence of Helix Angle on the Torque-Thrust Coupling Effect in Twist Drills, 'International Journal of Advanced Manufacturing Technology', vol. 2, no. 4, November 1987.

  • Wei, Yingying; Qinglong An, Ming, Weiwei; Chen, Ming: Effect of Drilling parameters and tool geometry on Drilling performance in Drilling carbon fiber–reinforced plastic/ titanium Alloy stacks, 'Advance in Mechanical Engineering', vol. 8(9), no. 16, August 2016.

  • Jolene S Vas, Fernandes, Aster; D’Souza, Arnold; Ankith Rai; Quadros, Jaimon D: Analysis of Temperature Changes during Dry Drilling of Austenitic Stainless Steels on Twist Drills Having Different Point Angles, 'Journal of Mechanical Engineering and Automation', vol. 6(5A), 2016.

  • Gopal Krishna, UB; Sreenivas Rao, KV; Vasudeva, B: Effect of percentage reinforcement of b4c on the tensile Property of aluminium matrix composites, 'International Journal of mechanical Engineering and Robotic Research', vol. 3, October 2012.

  • Mirjalili, Seyedali: SCA: A Sine Cosine Algorithm for Solving Optimization Problems, Knowledge-based Systems, vol. 96, March 2016.

  • Yashavanth Kumar, TG; Anil Kumar, Satheesh, J; Madhusudhan, T: A Review on Properties of Al-B4C Composite of Different Routes, 'International Research Journal of Engineering and Technology (IRJET)', vol. 3, no. 5, May 2016.

  • Kaneriya, Nayan G; Gaurav Kumar Sharma: Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI304 Austenitic Stainless Steel using Different Twist Drills, '5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014)', December 12th–14th, 2014, IIT Guwahati, Assam, India.

  • Topcu, HO; Gulsoy, Kadioglu, N and Gulluoglu, AN: Processing and mechanical properties of B4C reinforced Al matrix composites, 'Journal of Alloys and Compounds', 482, 2009, 516–521.

  • Shivapragash, B; Chandrasekaran, K; Samuel, M; Parthasarathy, C: Multiple Response Optimizations in Drilling Using Taguchi and Grey Relational Analysis, 'International Journal of Modern Engineering Research (IJMER)', vol. 3, no. 2, March-April, 2013, 765-768


Abstract Views: 236

PDF Views: 0




  • Optimization of Process Parameters in Drilling of AMMC Using Sine Cosine Algorithm

Abstract Views: 236  |  PDF Views: 0

Authors

T. Vijayaraj
Department of Mechanical Engineering, S.V. University, Tirupati, India
P. Venkata Ramaiah
Department of Mechanical Engineering, S.V. University, Tirupati, India

Abstract


Composite materials are important engineering materials due to their outstanding mechanical properties. Aluminium materials are widely used to take advantage of their low density, corrosion resistance and combination of strength and formability, especially in the automobile and aerospace industries for light weight applications. In the present work Al 6101 is reinforced with B4C (8% wt) the AMMC have been prepared by using stir casting process. In this work we are studying how the helix angle of drill bit will Influence on the output responses of Drilling. Optimum levels of process parameters are identified by sine cosine algorithm (SCA).

Keywords


AMMC, Drilling, Sine Cosine Algorithm.

References