Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Application of Desirability Based Hybrid Anfis Model for Optimization of Electro Discharge Machining of Hastealloy C-276


Affiliations
1 Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
     

   Subscribe/Renew Journal


Hastealloy C-276 is a difficult to machine superalloy and comprehensively employed in various engineering fields such as nuclear applications, aerospace and gas turbines. Hastealloy C-276 having better strength and poor thermal conductivity makes them difficult to machine materials which results in reduced life of the cutting tool and poor machinability by conventional methods of material removal. Advanced metal removal methods have evolved to accomplish those kind of needs and appealed to be an opposite alternative approach to traditional machining. Electro Discharge Machining (EDM) is considered as one of the nontraditional metal removal process which is especially adopted for machining of hard to machine materials. In this present investigation Spark Erosion Machining has been employed for machining of Haste Alloy C-276 with copper electrode by using Taguchi’s experimental design approach. Applied current (A), pulse on time (TON) and pulse off time (TOFF) were considered as the input process variables and the performance of spark erosion machining has been assessed by considering the performance measures such as material removal rate, surface roughness, overcut, form and orientation tolerance errors. The significance of process variables were analyzed by Analysis of Variance (ANOVA). Multi objective optimization has been performed by desirability function analysis to obtain better machining performance. In addition DFA based Adaptive Neuro Fuzzy Inference System (ANFIS) have been evolved to optimize the desired performance characteristics.

Keywords

EDM, Haste Alloy, Taguchi’s Design, Desirability Function Analysis, ANFIS.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Ahilan, C; Kumanan, S; Sivakumaran, N: Multi-objective optimisation of CNC turning process using grey based fuzzy logic. 'Int. J. Mach. Mach. Mater.', vol.5, 2009, 434–451.

  • Baraskar SS; Banwait, SS and Laroiya, SC: Multi-objective optimisation of electrical discharge machining process using Derringer’s desirability function approach, 'Int. J. Mater. Eng. Innova'., vol. 2, no. 3/4, 2011, 203-221.

  • Bharti, PS; Maheshwari, S; Sharma, C: Experimental investigation of Inconel 718 during die- sinking electric discharge machining, 'Int. J. Eng. Sci. Technol'., vol. 2, 2010, 6464–6473.

  • Derringer, G; Suich, R: Simultaneous Optimization of Several Response Variables, 'J. Quality Technol'., vol. 12, no. 4, 1980, 214-219.

  • Dhanabalan, C; Sivakumar, K; Sathiya Narayanan, C: Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation Tolerance, 'Indian J. Eng. Mater. Sci'., vol. 20, 2013, 391–397.

  • Ho, KH; Newman, ST: State of the art electrical discharge machining (EDM), 'Int. J. Mach. tools and manuf'., vol. 43, 2003, 1287 – 1300.

  • Jang, JSR; Sun, CT; Mizutani, E: Neuro-fuzzy and Soft Computing: A Comput. App. Learn. Mach. Intelligence, Prentice Hall, Upper Saddle River, NJ, 1997.

  • Kuppan, P; Narayanan, S; Rajadurai, A; Adithan, M: Effect of EDM parameters on hole quality characteristics in deep hole drilling of Inconel 718 superalloy, 'Int. J. Manuf. Res'., vol. 10, no. 1, 2015, 45-63.

  • Kuppan, P; Rajadurai, A; Narayanan, S: Influence of EDM process parameters in deep hole drilling of Inconel 718, 'Int. J. Adv. Manuf. Technol'., 38, 2008, 74–84.

  • Lin, JL; Wang, KS; Yan, BH; Tarng, YS: Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics, 'J. Mater. Process. Technol'., vol. 102, 2000, 48-55.

  • Luis, CJ; Puertas, I; Villa, G: Material removal rate and electrode wear study on the EDM of silicon carbide, 'J. Mater. Process. Technol'., 165, 2005, 889–896.

  • Pradhan, MK & Biswas, CK: Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISID2 steel “NF and NN based prediction of responses in EDM of D2 steel, 'Int. J. Adv. Manuf. Technol'., vol. 50(5-8), 2010, 591–610.

  • Qu, NS; Hu, Y; Zhu, D; Xu, ZY: Electrochemical machining of blisk channels with progressive pressure electrolyte flow. Mater. Manuf. Process'. vol. 29, 2014, 572-578.

  • Rupesh Kumar Pandey, SS Panda: Optimization of bone drilling parameters using grey-based fuzzy algorithm, Meas., vol. 47, 2014, 386–392.

  • Pervaiz, Salman; Rashid, Amir; Deiab, Ibrahim; Nicolescu, Mihai: Influence of tool materials on machinability of titanium- and nickel-based alloys: A Review, 'Mater. Manuf. Process'., vol. 29, 2014, 219-252.

  • Sengottuvel, P; Satishkumar, S; Dinakaran, D: Optimization of multiple characteristics of EDM parameters based on desirability approach and fuzzy modeling., 'Procedia Eng'., 64, 2013, 1069-1078.

  • Suresh, P; Marimuthu, K; Ranganathan, S; Rajmohan, T: Optimization of machining parameters in turning of Al−SiC−Gr hybrid metal matrix composites using grey-fuzzy algorithm, 'Trans. Nonferrous Met. Soc. China', vol. 24, 2014, 2805−2814.

  • Teimouri, R; Baseri, H; Moharami, R: Multiresponses optimization of ultrasonic machining process, 'J. Intel. Manuf'., vol. 26, 2015, 745-753.

  • Caydas, Ulas; Hascalık, Ahmet; Ekici, Sami: An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM, 'Expert Syst. Appl'., vol. 36, 2009, 6135–6139.

  • Wu, Q: Serrated chip formation and tool-edge wear in high-speed machining of advanced aerospace materials, Utah State University, Logan, Utah, 2007.

  • Xiaojiang Cai; Sheng Qin; Junli Li; Qinglong An; Ming Chen: Experimental investigation on surface integrity of end milling nickel based alloy - Inconel 718, 'Mach. Sci. Technol. Int. J'., vol. 18, 31-46


Abstract Views: 245

PDF Views: 0




  • Application of Desirability Based Hybrid Anfis Model for Optimization of Electro Discharge Machining of Hastealloy C-276

Abstract Views: 245  |  PDF Views: 0

Authors

N. Manikandan
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
N. Naresh
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
J. S. Binoj
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
S. Sree Sabari
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India
R. L. Krupakaran
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College, Tirupati, Andhra Pradesh, India

Abstract


Hastealloy C-276 is a difficult to machine superalloy and comprehensively employed in various engineering fields such as nuclear applications, aerospace and gas turbines. Hastealloy C-276 having better strength and poor thermal conductivity makes them difficult to machine materials which results in reduced life of the cutting tool and poor machinability by conventional methods of material removal. Advanced metal removal methods have evolved to accomplish those kind of needs and appealed to be an opposite alternative approach to traditional machining. Electro Discharge Machining (EDM) is considered as one of the nontraditional metal removal process which is especially adopted for machining of hard to machine materials. In this present investigation Spark Erosion Machining has been employed for machining of Haste Alloy C-276 with copper electrode by using Taguchi’s experimental design approach. Applied current (A), pulse on time (TON) and pulse off time (TOFF) were considered as the input process variables and the performance of spark erosion machining has been assessed by considering the performance measures such as material removal rate, surface roughness, overcut, form and orientation tolerance errors. The significance of process variables were analyzed by Analysis of Variance (ANOVA). Multi objective optimization has been performed by desirability function analysis to obtain better machining performance. In addition DFA based Adaptive Neuro Fuzzy Inference System (ANFIS) have been evolved to optimize the desired performance characteristics.

Keywords


EDM, Haste Alloy, Taguchi’s Design, Desirability Function Analysis, ANFIS.

References