Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Multi Objective Optimization of Process Parameters in Drilling of AL 6061-T6 and Brass C360 Alloys by WASPAS Method


Affiliations
1 Department of Mechanical Engineering, S.V. University, Tirupati, India
     

   Subscribe/Renew Journal


In the present work, the drilling experiments are performed on Aluminum 6061-T6 and Brass C360 alloy block of 8mm thickness using HSS Twist drills by means of universal drilling machine. Cutting parameters drill diameter, speed and feed rate are varied at 3 different levels. A number of drilling experiments are conducted using the L9 orthogonal array according to Taguchi design of experiment (DOE) on both materials separately. The output performances viz. MRR, surface roughness, torque and cutting forces are recorded for each run. Multi objective optimization technique WASPAS (weighted aggregated sum product assessment) method is used for determining the optimal drilling parameters resulting in minimum Surface roughness, Torque, cutting force and Maximum MRR. The measured responses were analyzed and the Influence of drill parameters on output responses such as metal removal rate and surface roughness, cutting force, torque is studied. After nine experimental trials, responses are compared for Al 6061-T6 and Brass C360 alloys.

Keywords

Drilling, Taguchi Design of Experiment (DOE), AL 6061-T6 and Brass C360 Alloys, WASPAS Method.
User
Subscription Login to verify subscription
Notifications
Font Size

  • A. Prabukarth, V. Krishnaraj, M. Senthilkumar - multi-objective optimization on drilling of titanium alloy, Materials Science Forum vol. 763, 2013, 29-49.

  • M.A. Amran, S. Salmaha, R. Izamshahb, M. Hadzleyb, Sivaraosb -“Effects of machine parameters on surface roughness using response surface method in drilling process”, The Malaysian International Tribology Conference 2013, Procedia Engineering 68, 2013, 24 – 29.

  • Nisha Tamta, R S Jadoun - Parametric Optimization of Drilling Machining Process for Surface Roughness on Aluminium Alloy 6082 Using Taguchi Method, SSRG International Journal of Mechanical Engineering (SSRGIJME), vol. 2, no. 7, July 2015.

  • B.Shivapragash ,K.Chandrasekaran , C . Parthasarathy and M.Samuel-“Multiple Response Optimizations in Drilling Using Taguchi and Grey Relational Analysis”. International Journal of Modern Engineering Research (IJMER), vol. 3, no. 2, March-April. 2013, 765-768.

  • Madic, M.Gecevska, V.Radovanovic, M. Petkovic - Multi criteria economic analysis of machining processes using the waspas method, 'Journal Of Production Engineering', vol. 17, No. 2.

  • Hari Singh, Abhishek Kamboj, Sudhir Kumar: Multi Response Optimization in Drilling Al6063/SiC/15% Metal Matrix Composite,'International Journal of Mechanical and Mechatronics Engineering', vol. 8, no. 4, 2014


Abstract Views: 293

PDF Views: 2




  • Multi Objective Optimization of Process Parameters in Drilling of AL 6061-T6 and Brass C360 Alloys by WASPAS Method

Abstract Views: 293  |  PDF Views: 2

Authors

B. Karthik
Department of Mechanical Engineering, S.V. University, Tirupati, India
P. Venkataramaiah
Department of Mechanical Engineering, S.V. University, Tirupati, India

Abstract


In the present work, the drilling experiments are performed on Aluminum 6061-T6 and Brass C360 alloy block of 8mm thickness using HSS Twist drills by means of universal drilling machine. Cutting parameters drill diameter, speed and feed rate are varied at 3 different levels. A number of drilling experiments are conducted using the L9 orthogonal array according to Taguchi design of experiment (DOE) on both materials separately. The output performances viz. MRR, surface roughness, torque and cutting forces are recorded for each run. Multi objective optimization technique WASPAS (weighted aggregated sum product assessment) method is used for determining the optimal drilling parameters resulting in minimum Surface roughness, Torque, cutting force and Maximum MRR. The measured responses were analyzed and the Influence of drill parameters on output responses such as metal removal rate and surface roughness, cutting force, torque is studied. After nine experimental trials, responses are compared for Al 6061-T6 and Brass C360 alloys.

Keywords


Drilling, Taguchi Design of Experiment (DOE), AL 6061-T6 and Brass C360 Alloys, WASPAS Method.

References