Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Study on the Influence of LBW Process Parameters on Mechanical Properties of Dissimilar Metal Joints


Affiliations
1 Department of Mechanical Engineering, Sri Venkateswara University, Tirupati, India
     

   Subscribe/Renew Journal


Laser Beam Welding technique is applied to conduct experiments on joining of dissimilar metals, AISI 4130 and AISI 310 steels so as to study the influence of process parameters on mechanical properties of joints. Taguchi L25 Orthogonal Array is selected to join 2mm thick dissimilar steels by varying Laser Power, Welding Speed, Beam Incident Angle, Focal Point Position and Focal Length. Output results of Ultimate Tensile Strength (UTS) and Impact Strength (IS) are measured. ANOVA is carried out to obtain the levels of influence of process parameters and statistical evolution of the results. TOPSIS optimization is applied to transmogrify a multi-criteria optimization problem into a single-criterion problem, so as to obtain optimal combination of process parameters of Laser Beam Welding. Then UTS and IS are maximised. Results have revealed that the proposed method is appropriate for solving multi-criteria optimization of process parameters.

Keywords

Laser Beam Welding, Ultimate Tensile Strength, Impact Strength, Analysis of Variance, TOPSIS.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Narayana Reddy, B; Hema, P; Eswara Reddy, C; Padmanabhan, G: ‘Proceeding of 10th International Conference on Precision, Meso, Micro and Nano Engineering Manufacturing Engineering Section’, Department of Mechanical Engineering, IIT Madras, Dec 2017, 20-23.

  • Narayana Reddy, B; Hema, P; Padmanabhan, G: ‘Proceedings of the 1st International Congress on latest innovations in Materials Engineering & Technology’, Lendi Institute of Engineering & Technology, June 2018, 24.

  • Arun Kumar, S; Paulraj, S: ‘Optimisation of Process Parameters for Gas Tungsten Arc Welding of Incoloy 800HT Using TOPSIS, 'Materials Today: Proceedings', vol. 4, 2017, 2031–2039.

  • Sandeep Singh; Sanjeev Kumar; Harvant Singh; Lovedeep Singh: Experimental Investigation on AISI 304l & AISI 310 Alloys Welded by Gas Metal Arc Welding (GMAW) Process, 'ARME, vol. 3, no. 2, 2014, 9-13.

  • Naffakha, H; Shamaniana, M; Ashrafizadeha F: ‘Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657, 'Journal of Materials Processing Technology', vol. 209, 2009, 3628-3639.

  • Pascua, A; Stanciua, E M; Voiculescub, I; Țiereana M H; Roatăa, L C; Ocaña, J L: Chemical and Mechanical Characterisation of AISI 304 and AISI 1010 Laser Welding, 'Materials and Manufacturing Processes', 2015.

  • Elena, MS; Alexandru, P; Mircea, HT; Ionut CR; Ionelia V; Iosif, H; Catalin, C: Dissimilar Laser Welding of AISI 321 and AISI 1010, 'Technical Gazette', vol. 25, no.2, 2018, 344-349.

  • Subramanya, RP; Arun, S; Mervin, H; Shrikantha Rao: Multi Response Optimization of Friction Stir Welding Process Variables using TOPSIS approach, 'IOP Conf. Series: Materials Science and Engineering', vol. 376 (012134), 2018, 1-7


Abstract Views: 306

PDF Views: 0




  • Experimental Study on the Influence of LBW Process Parameters on Mechanical Properties of Dissimilar Metal Joints

Abstract Views: 306  |  PDF Views: 0

Authors

B. Narayana Reddy
Department of Mechanical Engineering, Sri Venkateswara University, Tirupati, India
P. Hema
Department of Mechanical Engineering, Sri Venkateswara University, Tirupati, India
G. Padmanabhan
Department of Mechanical Engineering, Sri Venkateswara University, Tirupati, India

Abstract


Laser Beam Welding technique is applied to conduct experiments on joining of dissimilar metals, AISI 4130 and AISI 310 steels so as to study the influence of process parameters on mechanical properties of joints. Taguchi L25 Orthogonal Array is selected to join 2mm thick dissimilar steels by varying Laser Power, Welding Speed, Beam Incident Angle, Focal Point Position and Focal Length. Output results of Ultimate Tensile Strength (UTS) and Impact Strength (IS) are measured. ANOVA is carried out to obtain the levels of influence of process parameters and statistical evolution of the results. TOPSIS optimization is applied to transmogrify a multi-criteria optimization problem into a single-criterion problem, so as to obtain optimal combination of process parameters of Laser Beam Welding. Then UTS and IS are maximised. Results have revealed that the proposed method is appropriate for solving multi-criteria optimization of process parameters.

Keywords


Laser Beam Welding, Ultimate Tensile Strength, Impact Strength, Analysis of Variance, TOPSIS.

References