Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Measurement of Joint Angle for Physical Therapy using a Wearable Carbon Nanotube Based Sensor


Affiliations
1 UIET, Panjab University, Chandigarh, India
2 Bio-Nanotechnology Lab, Division: H-1, CSIR-Central Scientific Instruments Organisation, Chandigarh, India
     

   Subscribe/Renew Journal


This work presents the simulation and analysis of the circuit designed to capture angle of elevation of joint of index finger using flexible Multi walled Carbon Nano Tubes (MWCNT) / silicone vulcanized rubber composite. To determine the location of optimum strain on index finger, a 3-D model of the index finger is created using CAD tool. For joint angle measurement, an electronic circuit comprises of wheatstone bridge, microcontroller and LCD is designed using Proteus software. One arm of the Wheatstone bridge is replaced with wearable sensor and rest is fixed resistors. Simulation result shows that the resistance of sensor varies linearly with the joint angle of index finger. Joint angle measurement upto 60° is displayed on LCD. This work will be used to model a wearable human motion monitoring device, which will assist the physiotherapists in observing the angle of movement of joints, thereby, aiding rehabilitative health.

Keywords

Angle of Elevation, Solidworks, Proteus, MWCNT, Human Motion Monitoring and Physiotherapy.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Song, Y., Cheng, X., Chen, H., Han, M., Chen, X., Huang, J., Su, Z., & Zhang, H. (2016). Highly compression-tolerant folded carbon nanotube/paper as solid-state supercapacitor electrode. Micro and Nano Letters, 11(10), 586–590. https://doi.org/10.1049/mnl.2016.0255

  • Gao, B., Zhang, R., He, M., Sun, L., Wang, C., Liu, L., Cao, A. (2016). Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites. Composites Part A: Applied Science and Manufacturing, 90, 433–440. https://doi.org/10.1016/j.compositesa.2016.08.012

  • Majumder, S., Mondal, T., & Deen, M.J. (2017, January 12). Wearable sensors for remote health monitoring. Sensors, 17(1), 130 (Switzerland). MDPI AG. https://doi.org/10.3390/s17010130

  • Biometrics Ltd., Goniometer & Torsiometer, Biometrics Ltd., Ladysmith, VA, USA, 2014.

  • Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012). Review of wearable sensors and systems with application in rehabilitation. Journal of Neuro Engineering and Rehabilitation, 9(1), 21. https://doi.org/10.1186/1743-0003-9-21

  • Zhou, H., & Hu, H. (2008, January). Human motion tracking for rehabilitation-A survey. Biomedical Signal Processing and Control.

  • Ching, C.T.S., Liao, S.Y., Cheng, T.Y., Cheng, C.H., Sun, T.P., Yao, Y.D., & Chang, K.M. (2017). Mechanical sensor designed for dynamic joint angle measurement. Journal of Healthcare Engineering, 8465212,1-12.

  • Alamusi, H.N., Fukunaga, H., Atobe, S., Liu, Y., & Li, J. (2011, November). Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites. Sensors. (Basel, Switzerland), 11(11), 10691–10723. https://doi.org/10.3390/s111110691

  • Kim, J.H., Hwang, J.Y., Hwang, H.R., Kim, H.S., Lee, J.H., Seo, J.W., & Lee, S.H. (2018). Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics. Scientific Reports, 8(1), 1-11. https://doi.org/10.1038/s41598-017-18209-w

  • Watson, R.B. (2008). Bonded Electrical Resistance Strain Gages (283–334). Springer. https://doi.org/10.1007/978-0-387-30877-7_12

  • Kono, M., Taura, T., Sunaga, H., Kimura, K., Suzuki, T., Morimura, M., Okano, H., Iwasaki, M., Takuno, H., Suzuki, M., & Kobayashi, H. (2006). High-Precision AC Wheatstone Bridge Strain Gauge. In: 2006 IEEJ International Analog VLSI Workshop, 16-18 Nov, Hangzhou, China.

  • Tarnita, D., Petcu, A. I., Oncescu, A. T., Vaduva, R. C., Tenovici, M. C., Petrovici, I. L., & Tarnita, D. N. (2019, May 16-17). Experimental study of the treadmill inclination influence on the flexion angles of the lower limbs joints. In IOP Conference Series: Materials Science and Engineering (Vol. 572). Institute of Physics Publishing.https://doi.org /10.1088/1757899X/572/1/012096

  • Carse, B., Meadows, B., Bowers, R., & Rowe, P. (2013).Affordable clinical gait analysis: An assessment of the marker tracking accuracy of a new low-cost optical 3D motion analysis system. Physiotherapy (United Kingdom), 99(4), 347–351. https://doi.org/10.1016/j.physio.2013.03.001

  • Yang, S., & Lu, N. (2013). Gauge factor and stretchability of silicon-on-polymer strain gauges. Sensors (Switzerland), 13(7), 8577–8594. https://doi.org/10.3390/s130708577

  • Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011). Stretchable carbon nanotube strain sensor for human-motion detection. Nature Nanotechnology, 6(5), 296–301. https://doi.org/10.1038/nnano.2011.36

  • Park, S.J., Kim, J., Chu, M., & Khine, M. (2016). Highly Flexible Wrinkled Carbon Nanotube Thin Film Strain Sensor to Monitor Human Movement. Advanced Materials Technologies, 1(5), 1600053. https://doi.org/10.1002/admt.201600053

  • Ryu, S., Lee, P., Chou, J.B., Xu, R., Zhao, R., Hart, A.J., & Kim, S.G. (2015). Extremely Elastic Wearable Carbon Nanotube Fiber Strain Sensor for Monitoring of Human Motion. ACS Nano, 9(6), 5929–5936.https://doi.org/10.1021/acsnano.5b00599

  • Wang, Y., Wang, L., Yang, T., Li, X., Zang, X., Zhu, M., & Zhu, H. (2014). Wearable and highly sensitive graphene strain sensors for human motion monitoring. Advanced Functional Materials, 24(29), 4666–4670. https://doi.org/10.1002/adfm.201400379

  • Park, J.J., Hyun, W.J., Mun, S.C., Park, Y.T., & Park, O.O. (2015). Highly stretchable and wearable graphene strain sensors with controllable sensitivity for human motion monitoring. ACS Applied Materials and Interfaces, 7(11), 6317–6324. https://doi.org/10.1021/acsami.5b00695

  • Zhang, T., Wang, X.Q., Jiang, L., Wu, X., Feng, W., Zhou, D., & Liu, H. (2016). Biomechatronic design & control of an anthropomorphic artificial hand for prosthetic applications. Robotica, 34(10), 2291–2308.https://doi.org/10.1017/S0263574714002902


Abstract Views: 281

PDF Views: 0




  • Measurement of Joint Angle for Physical Therapy using a Wearable Carbon Nanotube Based Sensor

Abstract Views: 281  |  PDF Views: 0

Authors

Nitish Jolly
UIET, Panjab University, Chandigarh, India
Garima Gupta
UIET, Panjab University, Chandigarh, India
Kanishka
UIET, Panjab University, Chandigarh, India
Gaurav Sapra
UIET, Panjab University, Chandigarh, India
Parveen Kumar
Bio-Nanotechnology Lab, Division: H-1, CSIR-Central Scientific Instruments Organisation, Chandigarh, India

Abstract


This work presents the simulation and analysis of the circuit designed to capture angle of elevation of joint of index finger using flexible Multi walled Carbon Nano Tubes (MWCNT) / silicone vulcanized rubber composite. To determine the location of optimum strain on index finger, a 3-D model of the index finger is created using CAD tool. For joint angle measurement, an electronic circuit comprises of wheatstone bridge, microcontroller and LCD is designed using Proteus software. One arm of the Wheatstone bridge is replaced with wearable sensor and rest is fixed resistors. Simulation result shows that the resistance of sensor varies linearly with the joint angle of index finger. Joint angle measurement upto 60° is displayed on LCD. This work will be used to model a wearable human motion monitoring device, which will assist the physiotherapists in observing the angle of movement of joints, thereby, aiding rehabilitative health.

Keywords


Angle of Elevation, Solidworks, Proteus, MWCNT, Human Motion Monitoring and Physiotherapy.

References