Open Access
Subscription Access
Open Access
Subscription Access
Study of build rate in laser directed energy deposition
Subscribe/Renew Journal
Laser directed energy deposition is an additive manufacturing process in which laser melted powder deposited at target spot. In the past few years, it has become more popular because it lets manufacturers make complex parts in small batches with a small number of post-processing steps. Fabrication of components in directed energy deposition takes lots of time. Therefore, it is necessary to study the build rate in laser directed energy deposition method. Optimum values of different powder feed rate, scan speed, and laser power on build rate are evaluated. It observed that the laser power is a significant process parameter in build rate followed by scan speed and powder feed rate for the printing of Inconel 718.
Keywords
DED, Inconel 718 Alloy, Process Parameters, Build Rate.
User
Subscription
Login to verify subscription
Font Size
Information
- Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011). High power Selective Laser Melting (HP SLM) of aluminum parts. Physics Procedia, 12, 271-278.
- Dass, A., & Moridi, A. (2019). State of the art in directed energy deposition: From additive manufacturing to materials design. Coatings, 9. https://doi.org/10.3390/COATINGS9070418
- Huang, Y., Khamesee, M. B., & Toyserkani, E. (2019). A new physics-based model for laser directed energy deposition (powder-fed additive manufacturing): From single-track to multi-track and multi-layer. Optics and Laser Technology, 109, 584-599.
- Jinoop, A. N., Paul, C. P., Nayak, S. K., Kumar, J. G., & Bindra, K. S. (2021). Effect of laser energy per unit powder feed on Hastelloy-X walls built by laser directed energy deposition based additive manufacturing. Optics and Laser Technology, 138. https://doi.org/10.1016/j.optlastec.2020.106845
- Nayak, S. K., Mishra, S. K., Paul, C. P., Jinoop, A. N., & Bindra, K. S. (2020). Effect of energy density on laser powder bed fusion built single tracks and thin wall structures with 100 μm preplaced powder layer thickness. Optics and Laser Technology, 125. https://doi.org/10.1016/j.optlastec.2019.106016
- Picasso, M., Marsden, C. F., Wagniere, J. D., Frenk, A., & Rappaz, M. (1994). A simple but realistic model for laser cladding. Metallurgical and Materials Transactions B, 25, 281-291.
- Rao, H., Giet, S., Yang, K., Wu, X., & Davies, C. H. J. (2016). The influence of processing parameters on aluminium alloy A357 manufactured by selective laser melting. Materials and Design, 109, 334-346.
- Spierings, A. B., Schoepf, M., Kiesel, R., & Wegener, K. (2014). Optimization of SLM productivity by aligning 17-4PH material properties on part requirements. Rapid Prototyping Journal, 20, 444-448.
- Strickland, J. D. (2016). Applications of Additive Manufacturing in the marine industry. PRADS 2016 - Proceedings of the 13th International Symposium on Practical Design of Ships and Other Floating Structures.
- Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016). Selective laser melting of stainless steel 316L with low porosity and high build rates. Materials and Design, 104, 197-204.
- Zhu, S., Chen, W., Ding, L., Zhan, X., & Chen, Q. (2019). A mathematical model of laser cladding repair. International Journal of Advanced Manufacturing Technology, 103, 3265-3278.
Abstract Views: 113
PDF Views: 0