Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Investigation of Characteristics of Hybrid Al 7(075+178) Alloy Developed Through Die Casting


Affiliations
1 Poornima University, Jaipur, Rajasthan, India
2 MVSR Engineering College, Nadergul, Hyderabad, India
     

   Subscribe/Renew Journal


7XXX series aluminum alloys (Al 7XXX alloys) are widely used in bearing components, such as aircraft frame, spars and stringers, for their high specific strength, high specific stiffness, high toughness, excellent processing, and welding performance. One of the most commonly used aluminium alloy for structural applications is Al7075 alloy due to its attractive comprehensive properties such as low density, high strength, ductility, toughness and resistance to fatigue. Another important alloy in the Al 7XXX series is Al7178. It has exceptional uses in Aviation field, Automobile sector, and Structural industries. In the present research work an attempt is made to prepare a blend of these two alloys and get the optimum composition which yields high strength Al 7(075+178). A medium frequency induction furnace with graphite crucible was used for the melting. Mechanical properties like Tensile strength and Hardness are selected as the output response along with the Microstructural analysis. Taguchi method was adopted for designing experimental composition of the composite which is prepared.


Keywords

Al 7(075+178), Taguchi-DoE, Hybrid Alloy, Die Casting
User
Subscription Login to verify subscription
Notifications
Font Size

  • Advekar, A., Arunkumar, Y., & Srinath, M. S. (2015). Simulation of high pressure die casting process for identifying and minimising defects, International Journal of Engineering Research & Technology (IJERT) NCERAME – 2015, 3(17).

  • Ahamed, S., Roshan, J. D., & Shilpa, P. C. (2019). A literature review on Aluminium-7075 metal matrix composites, International Research Journal of Engineering and Technology (IRJET), 6(6), e-ISSN: 2395-0056.

  • Ajibola, A. S., Olayinka, D, M., & Olalekan, S. T. (2012). Production and microstructural analysis of as-cast and heat-treated aluminium alloy, (Al-20%wtMg). Advances in Applied Science Research, 3 (4):2196-2203.

  • Annigeri, U. (2017). Method of stir casting of Aluminum metal matrix Composites: A review. Materials Today: Proceedings, 4(2). 1140-1146. 10.1016/j.matpr.2017.01.130.

  • Chakrapani, P., & Suryakumari, T.S.A. (2021). Mechanical properties of aluminium metal matrix composites-A review. Materials Today: Proceedings, 45, 5960-5964.

  • Dahle, A. K., Lee, Y. C., Nave, M. D., Schaffer, P. L., & StJohn, D. H. (2001). Development of the as-cast microstructure in magnesium–aluminium alloys. Journal of Light Metals, 1(1), 61-72.

  • Fischer, C., Schweizer, C. (2021). Experimental investigation of the damage characteristics of two cast aluminium alloys: Part III – Influence of the local microstructure and initial defect size on the fatigue properties. International Journal of Fatigue, 152, 106388.

  • Jiaxin Lv. (2020). A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions, Metals, 10, 1516.

  • Krishna, M. V., & Xavior, A. M. (2014). An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites. Procedia Engineering, 97, 918-924.

  • Lehuy, H., Masounave, J. & Blain, J. (1985). Rheological behaviour and microstructure of stir-casting zinc-aluminium alloys. Journal of Material Science, 20, 105-113. https://doi. org/10.1007/BF00555904

  • Lv, J., Zheng, J.-H., Yardley, V. A., Shi, Z., & Lin, J. (2020). A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions. Metals, 10(11), 1516. https://doi.org/10.3390/met10111516 12. Mathivanan, S., Eniyavan, G., Ilavarasan, A., & Karthik. B. (2019). A Review Paper of Al 7075 Metal Matrix Composition, International Journal of Engineering Research & Technology (IJERT), ETEDM - 2019 Conference Proceedings, 7(6), 1-5.

  • Nagarjuna, M., Gajanana, S., & Krishnaiah, A. (2020). Analysis on mechanical properties of AA7178- Al2O3 composites in hot rolling technique using taguchi method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10(3), 7835-7842.

  • Ravikumar, M., Suresh, R., Reddappa, H. N., Ram Mohan, Y. S., Nagaraja, C. R., Babu, E. R. (2021). Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques. Frattura ed Integrità Strutturale, 56 (2021) 160-170.

  • Ravindran, S., Mani, N., Balaji, S., Abhijith, M., & Surendaran, K. (2019). Mechanical Behaviour of Aluminium Hybrid Metal Matrix Composites – A Review. Materials Today: Proceedings. 16, 1020- 1033. 10.1016/j.matpr.2019.05.191.

  • Savas, M. A., & Altintas, S. (1993). The microstructural control of cast and mechanical properties of zinc-aluminium alloys. Journal of Material Science, 28, 1775-1780. https://doi. org/10.1007/BF00595744 17. Singh, J., Chauhan, A. (2016). Characterization of hybrid aluminium matrix composites for advanced applications – A review. Journal of Materials Research and Technology, 5(2), 159-169.

  • Xavior, M. A., & Ajith Kumar, J. P. (2017). Machinability of Hybrid Metal Matrix Composite -A Review. Procedia Engineering, 174, 1110- 1118, ISSN 1877-7058.

  • Yusuf, A., Shafii, T., Dubey, K., & Gupta, U. (2016). Design and Analysis of Pressure Die Casting Die for Automobile Component. Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, 16(3). 1-8.

  • Zhou, M. Y., Ren. L. B., Fan, L. L., Zhang, Y. W. X., Lu, T. H., Quan, G. F., Gupta, M. (2020). Progress in research on hybrid metal matrix composites. Journal of Alloys and Compounds, 838, 155274.


Abstract Views: 119

PDF Views: 0




  • Investigation of Characteristics of Hybrid Al 7(075+178) Alloy Developed Through Die Casting

Abstract Views: 119  |  PDF Views: 0

Authors

Colonel Anuj Bindra
Poornima University, Jaipur, Rajasthan, India
S. Gajanana
MVSR Engineering College, Nadergul, Hyderabad, India
Devesh Kumar
Poornima University, Jaipur, Rajasthan, India
B. Ravikumar
MVSR Engineering College, Nadergul, Hyderabad, India
B. Suresh Kumar Reddy
MVSR Engineering College, Nadergul, Hyderabad, India

Abstract


7XXX series aluminum alloys (Al 7XXX alloys) are widely used in bearing components, such as aircraft frame, spars and stringers, for their high specific strength, high specific stiffness, high toughness, excellent processing, and welding performance. One of the most commonly used aluminium alloy for structural applications is Al7075 alloy due to its attractive comprehensive properties such as low density, high strength, ductility, toughness and resistance to fatigue. Another important alloy in the Al 7XXX series is Al7178. It has exceptional uses in Aviation field, Automobile sector, and Structural industries. In the present research work an attempt is made to prepare a blend of these two alloys and get the optimum composition which yields high strength Al 7(075+178). A medium frequency induction furnace with graphite crucible was used for the melting. Mechanical properties like Tensile strength and Hardness are selected as the output response along with the Microstructural analysis. Taguchi method was adopted for designing experimental composition of the composite which is prepared.


Keywords


Al 7(075+178), Taguchi-DoE, Hybrid Alloy, Die Casting

References