Nano Science & Nano Technology: An Indian Journal

Open Access Open Access  Restricted Access Subscription Access

Modeling Of A Reactor Preparation Ethylene From Methane


Affiliations
1 Samarkand State University, Bukhara Medical Institution, Uzbekistan
 

In this study, catalytic oxygenation of methane and the influence of various factors in the process of ethylene production were studied. Based on the results obtained, the optimal conditions and the structure of the catalyst were chosen : (Mn2O3)x ∙ (Na2MoO4)y ∙ (ZrO2)z. The process was thermodynamically evaluated to obtain the most appropriate technology for extracting ethylene from methane, and the effect of various technological parameters on its main characteristics for mathematical modeling of the reactor was investigated.

Keywords

temperature; bulk velocity; adiabatic reactor; contact time; conversion; diameter; film thickness; mass transfer
User
Notifications
Font Size

  • Daneshpayeh M, Khodadadi A, Talebizadeh A et al. Kinetic modeling of oxidative coupling of methane over Mn/Na2WO4/SiO2 catalyst. Fuel Processing Technology. 2009;90(3); 403-10.

  • Ji S. Surface WO4 tetrahedron: these sence of the oxidative coupling of methane over M–W–Mn/SiO2 catalysts. J Catal. 2003;220(1): 47-56.

  • Tyunyaev AA, Nipan GD, Koltsova TN, et al. Polymorphic ODM catalysts Mn / W / Na (K, Rb, Cs) / SiO2. Int J Inorg Chem. 2009;54(5):723-26.

  • Dedov AG, Loktev AS, Telpukhovskaya NO, et al. Oxidative condensation of methane in the presence of lanthanumcerium catalysts: fundamental character of the effect of nonadditivity. Chem Technol Fuels Oils. 2010;46(2): 43-46.

  • Makhlin VA, Podlesnaya MV, Dedov AG, et al. Oxidative dimerization of methane: Kinetics, mathematical modeling, and optimization with La/Ce catalysts. Russ Chem Bull. 2008;79(9): 73-79.

  • Dedov AG, Loktev AS, Telpukhovskaya NO, et al. Mesoporous amorphous rare earth silicates, new catalysts of methane oxidative coupling. Doklady Akademii Nauk. 2008;422(2): 253 -55.

  • Taheri Z, Seyed-Matin N, Safekordi A, et al. A comparative kinetic study on the oxidative coupling of methane over LSCF perovskite-type catalyst. Applied Catalysis. 2009; 354(1-2): 143-52.

  • Xin Y, Song Z, Tan YZ, et al.The directed relation graph method for mechanism reduction in the oxidative coupling of methane. Catalysis Today. 2008;131(1): 483-488.

  • Lomonosov VI, Usmanov TR, Sinev MYu, et al. Patterns of Ethylene Oxidation under the Conditions of the Oxidative Condensation of Methane. Kinetics and Catalysis. 2014;55(4): 498-505.

  • Magomedov RN, Proshina AYu, Peshnev BV, et al. The effect of the gas environment and heterogeneous factors on the gas-phase oxidative cracking of ethane. Kinetics and Catalysis. 2013;54(4): 413-19.

  • Lomonosov VI, Gordienko YuA., Sinev MYu. Kinetic laws of oxidative condensation of methane in the presence of model catalysts. Kinetics and Catalysis. 2013;54(4):474-86.

  • Ghose R, Hwang HT, Varma A. Oxidative coupling of methane using catalysts synthesized by solution combustion method. Applied Catalysis A:General. 2013; 452: 147-54.

  • Kus S, Otremba M., Taniewski M. The catalytic performance in oxidative coupling of methane and the surface basicity of La2O3, Nd2O3, ZrO2. J Fuel. 2003:82(11); 1331-1338.


Abstract Views: 219

PDF Views: 1




  • Modeling Of A Reactor Preparation Ethylene From Methane

Abstract Views: 219  |  PDF Views: 1

Authors

N.I. Fayzullayev
Samarkand State University, Bukhara Medical Institution, Uzbekistan
SH.B. Rakhmatov
Samarkand State University, Bukhara Medical Institution, Uzbekistan

Abstract


In this study, catalytic oxygenation of methane and the influence of various factors in the process of ethylene production were studied. Based on the results obtained, the optimal conditions and the structure of the catalyst were chosen : (Mn2O3)x ∙ (Na2MoO4)y ∙ (ZrO2)z. The process was thermodynamically evaluated to obtain the most appropriate technology for extracting ethylene from methane, and the effect of various technological parameters on its main characteristics for mathematical modeling of the reactor was investigated.

Keywords


temperature; bulk velocity; adiabatic reactor; contact time; conversion; diameter; film thickness; mass transfer

References