Research Cell: An International Journal of Engineering Sciences

Open Access Open Access  Restricted Access Subscription Access

Study on Advanced Approaches in Abrasive Jet Machining (AJM)


Affiliations
1 Punjabi University, Patiala, Punjab, India
 

Abrasive Jet Machining (AJM) can be used for achieving highly accurate, sharp edges and precisely sized components for space, missile and nuclear industries. Abrasive Jet Machining (AJM) is an advanced machining process requiring low capital cost and operational cost because the investment cost on various equipments is less as compared to other non-traditional machining process. Abrasive Jet Machining (AJM) provides a better surface finish. In this paper, the extensive review and development on the Abrasive Jet Machining (AJM) are studied.

Keywords

Abrasive Jet Machining (AJM), Material Removal Rate (MRR), Stand-Off Distance (SOD), Kerf, Surface Finish.
User
Notifications
Font Size

  • Hocheng and K.R. Chang, “Material removal analysis in abrasive water jet cutting of ceramic plates “Journal of Materials Processing Technology”, 40(1994) 287-304.

  • Mahabalesh Palleda, “A study of taper angles and material removal rates of drilled holes in the abrasive water jet machining process “Journal of Materials Processing Technology” (2007) 292–295.

  • A. Alberdi, A. Suárez, T. Artaza, G. A. Escobar-Palafox, K. Ridgway, “Composite Cutting with Abrasive Water Jet,” The Manufacturing Engineering Society International Conference, MESIC2013, Procedia Engineering 63 (2013) 421 – 429.

  • C. Ma, R.T. Deam, “A correlation for predicting the kerf profile from abrasive water jet cutting,” Experimental Thermal and Fluid Science 30 (2006) 337–343.

  • M. Chithirai Pon Selvan, N. Mohana Sundara Raju, R. Rajavel, “Effects of Process Parameterson Depth of Cut in Abrasive Waterjet Cutting of Cast Iron,” International Journal of Scientific &Engineering Research Volume 2, Issue 9, September-2011.

  • Jiuan-Hung Ke, Feng-Che Tsai, Jung-Chou Hungb, Biing-HwaYan,“Characteristics study of flexible magnetic abrasive in abrasive jet machining” Pro. CIRP 1 (2012), pp. 679 – 680.

  • Kumar Abhishek, Somashekhar S Hiremathb, “Machining of Micro-holes on Soda lime Glass using Developed Micro-Abrasive Jet Machine (μ-AJM).”Pro.Techn. 25 (2016), pp. 1234 – 1241.

  • Kumar Abhishek and Somashekhar S Hiremath. “Improvement of Geometrical Accuracy of Micro Holes Machined Through Micro Abrasive Jet Machining”, Pro. CIRP 46 (2016). pp. 47 – 50.

  • D.V. Srikanth, Dr. M. SreenivasaRao,“Metal Removal and Kerf Analysis in Abrasive jet drilling of Glass Sheets”, Pro. Mater.Scie. 6 (2014), pp. 1303 – 1311 .

  • Vasanth S, Muthuramalingam T, Vinothkumar P, Geethapriyan T, Murali G, “Performance Analysis of Process Parameters on Machining Titanium(Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process” , Proce. CIRP 46 (2016), pp. 139 – 142.

  • Dirk Biermanna, Robert Amutha, Sebastian Schumann, Michael Rieger, Bernd Kuhlenkötte, “Wet abrasive jet machining to prepare and design the cutting edge micro shape”. Pro. CIRP 45 (2016), pp. 195 – 198

  • Vishal Guptaa , P.M. Pandeya, Mohinder Pal Garg , Rajesh Khannab, N.K. Batrab, “Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble”, Pro. Mate. Sci. 6 (2014), pp.140 – 149.


Abstract Views: 198

PDF Views: 0




  • Study on Advanced Approaches in Abrasive Jet Machining (AJM)

Abstract Views: 198  |  PDF Views: 0

Authors

Anil Jindal
Punjabi University, Patiala, Punjab, India

Abstract


Abrasive Jet Machining (AJM) can be used for achieving highly accurate, sharp edges and precisely sized components for space, missile and nuclear industries. Abrasive Jet Machining (AJM) is an advanced machining process requiring low capital cost and operational cost because the investment cost on various equipments is less as compared to other non-traditional machining process. Abrasive Jet Machining (AJM) provides a better surface finish. In this paper, the extensive review and development on the Abrasive Jet Machining (AJM) are studied.

Keywords


Abrasive Jet Machining (AJM), Material Removal Rate (MRR), Stand-Off Distance (SOD), Kerf, Surface Finish.

References