Research Cell: An International Journal of Engineering Sciences

Open Access Open Access  Restricted Access Subscription Access

Investigation on Optimal Placement and Sizing of Distributed Generation Units Using Optimization Technique


Affiliations
1 Deptt. of Electrical Engg, PEC University of Technology, Chandigarh, India
 

Distributed Generation (DG) has gained more importance to meet the increased load demand. Its integration in a distribution system in comparison to conventional system stacks numerous potential benefits related to losses reduction, improvement in voltage profile, etc. Few important issues involved with distributed generation are placement, sizing, its rating, mode of operation and technology etc. This paper focuses on one of the issue that is optimal placement of DG unit as the allocation of DG units at inappropriate places results in increase in system loss and also reduction in bus voltage profile. Alternative sources of energy based distributed generation has one of the considerable benefit as environmental friendliness. Hence, allocation of distributed generation units in proper place is an important aspect for maximizing the benefits stated above.
User
Notifications
Font Size

  • Griffin T, Tomosovic K, Secrest D, Law, “Placement of dispersed generations systems for reduced losses”, Proceedings of the 33rd Hawaii international conference on sciences, Hawaii, 2000.

  • Duong Quoc Hung, Mithulananthan, N., “Multiple Distributed Generator Placement in Primary Distribution Networks for Loss Reduction”, Industrial Electronics, IEEE Transactions April 2013.

  • Lopes, J. A., Hatziargyriou, N., Mutale, J. and Jenkins, N, “Integrating distributed generation into electric power system: A review of drivers, challenges and opportunities”, Electric Power Systems Research, vol.

  • , 2000.

  • Long T. Lama, Lee Branstetter and Inês M.L. Azevedo, “China's wind industry: Leading in deployment, lagging in innovation”, Energy Policy, pp 588-599, vol. 106, 2017.

  • Hale Cetiney, Fernando A Kuipers and A. Nazih Guvers, “Optimal siting and sizing of wind farms”, Renewable Energy, pp 51-58, vol. 101, 2017.

  • Surbhi Bakshi, Dr Tilak Thakur, Dr Rintu Khanna, “Analytical Approach for Loss Minimization in Distribution Systems by Optimum Placement and Sizing of Distributed Generation,” MATEC Web of Conferences, Advancements in Engineering & Technology-2016” (ICAET-2016), Vol. 57, April 2016.

  • Surbhi Bakshi, Dr Tilak Thakur, Dr Rintu Khanna, “Performance Analysis of a Novel Hybrid Optimization Technique for Sizing and Placement of DG units,” Published, Journal of Scientific and Industrial Research, April 2017.

  • Surbhi Bakshi, Dr Tilak Thakur, Dr Rintu Khanna, “Exploration of distributed generation for future distribution networks”, International Journal of Advanced Research in Computer Engineering & Technology (IJARCET) Volume 3 Issue 11, November 2014.

  • Scarlatache, F., “Using k-means clustering method in determination of the optimal placement of distributed generation sources in electrical distribution systems”, Optimization of Electrical and Electronic Equipment (OPTIM), 2012 13th International Conference ,24-26 May 2012.

  • Al Abri, R. S., “Optimal Placement and Sizing Method to Improve the Voltage Stability Margin in a Distribution System Using Distributed Generation”, Power Systems, IEEE Transactions on, Issue: 99, 2012.


Abstract Views: 205

PDF Views: 0




  • Investigation on Optimal Placement and Sizing of Distributed Generation Units Using Optimization Technique

Abstract Views: 205  |  PDF Views: 0

Authors

Surbhi Bakshi
Deptt. of Electrical Engg, PEC University of Technology, Chandigarh, India
Tilak Thakur
Deptt. of Electrical Engg, PEC University of Technology, Chandigarh, India
Rintu Khanna
Deptt. of Electrical Engg, PEC University of Technology, Chandigarh, India

Abstract


Distributed Generation (DG) has gained more importance to meet the increased load demand. Its integration in a distribution system in comparison to conventional system stacks numerous potential benefits related to losses reduction, improvement in voltage profile, etc. Few important issues involved with distributed generation are placement, sizing, its rating, mode of operation and technology etc. This paper focuses on one of the issue that is optimal placement of DG unit as the allocation of DG units at inappropriate places results in increase in system loss and also reduction in bus voltage profile. Alternative sources of energy based distributed generation has one of the considerable benefit as environmental friendliness. Hence, allocation of distributed generation units in proper place is an important aspect for maximizing the benefits stated above.

References