Open Access Open Access  Restricted Access Subscription Access

Ultrasonic Characterization of Extractant for Rare Earth Elements


Affiliations
1 Department of Physics, Veer Surendra Sai University of Technology, Sambalpur-768018, Odisha, India
 

The most important application of rare earth element materials (REE) is in use as source of nuclear energy. Reprocessing consists of dissolution of spent nuclear fuel in acid medium and subsequent recovery of fissile materials and other materials by solvent extraction technique. The appearance of 'third phase' and its formation is one of the major problems encountered during extraction of rare earth elements materials. The treatment of suitable extractants and diluents with knowledge of their intermolecular interaction in the third phase is an important step in the extraction process. The extractant like methyl iso butyl ketone (MIBK) with diluents like toluene and kerosene has been undertaken for the study of third phase. The ultrasonic study has been done with binary mixture at temperature 303 K for different frequencies. The ultrasonic velocities, density, viscosity are measured experimentally. The different physico-acoustical parameters computed and explained in terms of molecular interaction. The variation of each parameter provides the optimum suitable blends of the mixture for extraction of REE materials. The efficiency of the extraction is calculated using Nernst distribution law. The result shows good extraction efficiency for blends of MIBK and toluene as compared to kerosene.

Keywords

Rare Earth Elements, Extractant, Diluent, Ultrasonic Velocity, Viscosity.
User
Notifications
Font Size

  • Ali A., Nain A.K. and Kamil M., Physical-chemical studies of non-aqueous binary liquid mixtures at various temperatures, Thermochim. Acta., 274 (1996) 209.
  • Ali A. and Nain A.K., Ultrasonic study of molecular interactions in N, N-dimethylacetamide+ethanol binary mixtures at various temperatures, Acoust. Lett., 19 (1996) 181.
  • Tuck D.G., Viscosity measurement on the system nitric acid + tri-n-butyl phosphate, Trans. Faraday Soc., 57 (1961) 1297.
  • Kannappan A.N. and Rajendran V., Ultrasonic studies on carboxylic acids with amine in a polar Solvent, Indian J. Phys., 65 (1991) 266.
  • Petek A. and Dolecek V., Excess molar volumes of binary liquid mixtures of cyclohexane-carbon tetrachloride and toluene-benzene at various temperatures, Acta Chim. Slov. 45 (1998) 153-160.
  • Ali A., Nain A.K., Sharma V.K. and Ahmad S., Study of molecular interaction in ternary mixtures through ultrasonic speed measurements, Phys. Chem. Liq., 42 (2004) 375-383.
  • De A.K., Khopkar S.M. and Chalmers R.A., Solvent Extraction of Metals. Van Nostrand, London, (1970).
  • Nath G. and Paikaray R., Effect of frequency on acoustic parameters in a binary mixture of polar liquids, Indian J. of Phys., 83 (2009) 1567-1574.
  • Habashi F., A Text book of hydrometallurgy, Metallurgie Extractive Quebec", Enr, (1993).

Abstract Views: 174

PDF Views: 6




  • Ultrasonic Characterization of Extractant for Rare Earth Elements

Abstract Views: 174  |  PDF Views: 6

Authors

Ranjeeta Giri
Department of Physics, Veer Surendra Sai University of Technology, Sambalpur-768018, Odisha, India
Ganeswar Nath
Department of Physics, Veer Surendra Sai University of Technology, Sambalpur-768018, Odisha, India

Abstract


The most important application of rare earth element materials (REE) is in use as source of nuclear energy. Reprocessing consists of dissolution of spent nuclear fuel in acid medium and subsequent recovery of fissile materials and other materials by solvent extraction technique. The appearance of 'third phase' and its formation is one of the major problems encountered during extraction of rare earth elements materials. The treatment of suitable extractants and diluents with knowledge of their intermolecular interaction in the third phase is an important step in the extraction process. The extractant like methyl iso butyl ketone (MIBK) with diluents like toluene and kerosene has been undertaken for the study of third phase. The ultrasonic study has been done with binary mixture at temperature 303 K for different frequencies. The ultrasonic velocities, density, viscosity are measured experimentally. The different physico-acoustical parameters computed and explained in terms of molecular interaction. The variation of each parameter provides the optimum suitable blends of the mixture for extraction of REE materials. The efficiency of the extraction is calculated using Nernst distribution law. The result shows good extraction efficiency for blends of MIBK and toluene as compared to kerosene.

Keywords


Rare Earth Elements, Extractant, Diluent, Ultrasonic Velocity, Viscosity.

References