Journal of Pure and Applied Ultrasonics

Open Access Open Access  Restricted Access Subscription Access

Ultrasonic Study of Aqueous Solution of Cellulose with NaOH for Surface Modification of Natural Fiber


Affiliations
1 Department of Physics, Ravenshaw University, Cuttack-753003, India
2 Department of Physics, Veer Surendra Sai Univesity of Technology, Sambalpur-768018, India
 

The important issue in composite technology is the interfacial strength between the fiber and matrix. The strong bonding in the interfacial region is essential for achieving high mechanical performances of biocomposites. Therefore, a number of chemical and physical treatment studies on a variety of natural fibers have been devoted to understand and enhance the interfacial adhesion between the natural fibers and the polymer matrix and to further improve the composite properties. In the present study, sodium hydroxide was independently used as fiber surface treatment media. Ultrasonic technique can be utilized as a dynamic treatment to understand the basic mechanism in chemical treatment of natural fiber. Ultrasonic velocity, and density have been measured in the aqueous solutions of Cellulose with sodium hydroxide, with a view to understand the nature of interaction between the cellulose and sodium hydroxide at temperature 303K. The acoustical parameters such as adiabatic compressibility, intermolecular free length, acoustic impedance are calculated. These parameters provide valuable information regarding achieving of high mechanical performances of natural fiber. The SEM and FTIR data of untreated and treated date palm fiber clearly shows the improvement of surface of date palm leaf.


Keywords

Natural Fiber, Cellulose, Surface Treatment, Ultrasonic Wave, Acoustic Parameters.
User
Notifications
Font Size

  • Swamy K.M. and Narayana K.L., Intensification of leaching process by dual-frequency ultrasound, Ultrason. Sonochem. 8 (2001), 341-346.

  • Nath G., Sahu S. and Paikaray R., Effect of frequency on acoustic parameters in a binary mixture of polar liquids, Ind. J. Phys. 83 (2009), 1567-1574.

  • Nath G., Sahu S. and Paikaray R., Study of acoustic parameters of binary mixtures of a nonpolar liquid with polar liquid at different frequencies, Ind. J. Phys. 4 (2009), 429-436.

  • Sarangi A., Nath G., Swain S.K. and Paikaray R., Chemical modification of natural fibers with acetone blended alcohols Adv. Sci. Lett. 20(4) (2014), 570-573.

  • Kumar D.S. and Rao D.K., Ultrasonic velocity in mixture of some alkanols with aqueous propylene glycol, Indian J. Pure Appl. Phys. 45 (2007), 210-220.

  • Nath G., Tripathy A. and Paikaray R., Study of acoustic parameters in binary mixture at variable frequencies, Int. J. Thermophys. 11 (2013), 2160-2172.

  • Li X., Tabil L. G. and Panigrahi S., Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A Review, J. Polym. Environ. 15(1) (2007), 25-33.

  • Alawar A., Hamed A. and Al-Kaabi K., Characterization of treated date palm tree fiber as composite reinforcement, Composites Part B 40(7) (2009), 601-606.


Abstract Views: 247

PDF Views: 1




  • Ultrasonic Study of Aqueous Solution of Cellulose with NaOH for Surface Modification of Natural Fiber

Abstract Views: 247  |  PDF Views: 1

Authors

Gyana Ranjan Mishra
Department of Physics, Ravenshaw University, Cuttack-753003, India
Ganeswar Nath
Department of Physics, Veer Surendra Sai Univesity of Technology, Sambalpur-768018, India
Rita Paikaray
Department of Physics, Ravenshaw University, Cuttack-753003, India

Abstract


The important issue in composite technology is the interfacial strength between the fiber and matrix. The strong bonding in the interfacial region is essential for achieving high mechanical performances of biocomposites. Therefore, a number of chemical and physical treatment studies on a variety of natural fibers have been devoted to understand and enhance the interfacial adhesion between the natural fibers and the polymer matrix and to further improve the composite properties. In the present study, sodium hydroxide was independently used as fiber surface treatment media. Ultrasonic technique can be utilized as a dynamic treatment to understand the basic mechanism in chemical treatment of natural fiber. Ultrasonic velocity, and density have been measured in the aqueous solutions of Cellulose with sodium hydroxide, with a view to understand the nature of interaction between the cellulose and sodium hydroxide at temperature 303K. The acoustical parameters such as adiabatic compressibility, intermolecular free length, acoustic impedance are calculated. These parameters provide valuable information regarding achieving of high mechanical performances of natural fiber. The SEM and FTIR data of untreated and treated date palm fiber clearly shows the improvement of surface of date palm leaf.


Keywords


Natural Fiber, Cellulose, Surface Treatment, Ultrasonic Wave, Acoustic Parameters.

References