International Journal of Advanced Studies in Computer Science and Engineering

Open Access Open Access  Restricted Access Subscription Access

Accurate Modified Transmission Line Model For Inset-Fed Antennas Array Design


Affiliations
1 Telecommunications Laboratory (Faculty of Technology) Department of Physic, Faculty of Sciences, Abou-Bekr Belkaïd University, Tlemcen 13000, Algeria
2 STIC Laboratory (Faculty of Technology) Department of Telecommunications, Faculty of Technology, Abou-Bekr Belkaïd University, Tlemcen 13000, Algeria
 

The work presented in this paper proposes the design of single Inset-fed antenna and antennas array with corporate feed network based on accurate modified transmission line model. The model developed is simple, accurate and takes into account all the characteristics of the antenna array and their feed system. To test this proposed model, the results obtained are compared with those obtained by the moment’s method (Agilent Momentum). The paper confirms the validity of the developed model by presenting several simulation results. The results obtained are then exposed and discussed.

Keywords

Printed Inset-fed antenna, antennas array, transmission line model, moment’s method (Momentum).
User
Notifications
Font Size

  • R. A. Sainati, 1996, "CAD of Microstrip Antenna for Wireless Applications", Artech House, Icc.

  • S. Gao and A. Sambell, 2006, "A Simple Broadband Printed Antenna", Progress in Electromagnetics Research, PIER 60, pp. 119–130.

  • P. M. Mendes, M. Bartek, J. N. Burghartz, J. H. Correia, 2003, "Design and Analysis of a 6 GHz Chip Antenna on Glass Substrates for Integration with RF/Wireless Microsystems", IEEE proceeding.

  • Wi. Sang-Hyuk, 2007, "Wideband microstrip patch antenna with U-shaped parasitic", IEEE Trans Antennas Propag, 55(4):1196-9.

  • D. M. Pozar and D.H. Schaubert (eds.), 1995, "Microstrip Antennas, the Analysis and Design of Microstrip Antennas and Arrays", IEEE Press, New York, NY.

  • C.A. Balanis, 1997, "Antenna Theory Analysis and Design, Second Edition". United States of America. John Wiley & Sons, p734.

  • Abri M., Boukli-hacene N., Bendimerad. F.T. & Cambiaggio E. , May 2006, "Design of a Dual Band Ring Printed Antennas Array", Microwave journal, vol. 49, n. 5, pp. 228-232.

  • S. Yang, , E. Adel, S. Lin, A. E. Fathy, A. Kamel, and H. Elhennawy, 2007, "A highly efficient Vivaldi antenna array design on thick substrate and fed by SIW structure with integrated GCPW feed", IEEE Antennas and Propagation Society International Symposium, pp. 1985–1988.

  • M.F. Bendahmane, M. Abri, F.T. Bendimerad and N. Boukli-Hacene, September 2010, "A Simple Modified Transmission Line Model for Inset-fed Antenna Design", International Journal of Computer Science Issues (IJCSI), ISSN (Online): 1694-0784, vol. 7, Issue 5, pp. 331-335.

  • J. F. Zurcher & F. E. Gardiol, "Broadband Patch Antenna", Artech House, Boston. London.

  • M. Abri, H. Abri Badaoui, M. A. Belhadi and I. Kalai, 2012, "Log periodic Bow-Tie Antennas (LPA) Design Using the Transmission Line Model", Journal of Radio Electronics, N°7.

  • S. Didouh, M. Abri, and F.T. Bendimerad, 2012, "Corporate-Feed Multilayer Bow-Tie Antenna Array Design Using a Simple Transmission Line Model", Modelling and Simulation in Engineering, Volume 2012, Article ID 327901, doi:10.1155/2012/327901, 8pages.

  • M. Abri, H. Abri Badaoui, H. Dib and A. S. E. Gharnaout, July 2012, "Bi-Band Bow-Tie antennas array design using a simple equivalent transmission line model", International Journal of Computer Networks & Communications (IJCNC), Vol.4, No.4, pp. 279-290.

  • M. Abri, N. Boukli-hacene, F.T. Bendimerad and M. Bousahla, March 2010, "A flexible transmission line model for series-line antennas array design", International Journal of Microwave and Optical Technology, Vol.5, No.2, pp. 69-75.

  • EO. Hammerstad, 1975, "Equations of Microstrip Circuit Design", Proc. Fifth European Microwave Conf., pp. 268-272.

  • Ying Hu, David R. Jackson, Jeffery T. Williams, Stuart A. Long, and Varada Rajan Komanduri, October 2008, "Characterization of the Input Impedance of the Inset-Fed Rectangular Microstrip Antenna", IEEE Transactions on Antennas and Propagation, Vol. 56, No. 10, pp. 3314-3318.

  • M. Ramesh and K.B. Yip, 12 December 2003, "Design inset fed microstrip antenna", Microwaves and RF Letters, 42.

  • M. Dwivedi et al., July 2012, "Design of a wideband inset feed microstrip patch antenna", International Journal of Engineering Science and Technology (IJEST), Vol. 4, No. 7, pp.3212-3218.

  • Priya Upadhyay and Richa Sharma, January 2013, "Design and study of inset feed square microstrip patch antenna for S-band application", International Journal of Application or Innovation in Engineering & Management (IJAIEM), ISSN: 2319-4847, Vol. 2, Issue 1, pp. 256-262.

  • N. Hassaine, September 2001, "Conception de modèles équivalents pour analyse et synthèse d’antennes microrubans en réseaux périodiques et non périodiques", Thèse de Magister, Faculté de Technologie - Université de Tlemcen (Algérie).

  • H. Pues and A. Van de Capelle, December 1984, "Accurate transmission line model for the rectangular microstrip antenna", IEE Microwaves, Optics and Antennas Proceedings, Vol. 131, No. 6, pp.334-340.

  • B.C. Wadell, 1991, "Transmission line design handbook", Artech House, Boston, London.

  • Y.M. Jo, 1998, "Theoretical analysis of microstrip patch antenna using transmission line models", ASL Technical Report, Florida Institute of Technology, No. 17.

  • Y.T. Lo, D. Solomon and W.F. Richards, March 1979, "Theory and experiment on microstrip antenna", IEE Microwaves, Antennas and Propagation Proceedings, Vol. AP-27, No. 2, pp.137-145.

  • A. G. Derneryd, November 1976, "Linearly Polarized Microstrip Antennas", IEEE Trans. AP., pp. 846-851.

  • AG. Derneryd, 1978, "A Theoretical Investigation of the Rectangular Microstrip Antenna", IEEE Trans AP, 26(4), pp. 532-535.

  • JM. Ribero, R. Staraj, JP. Damiano, 1997, "Analytical models for fast analysis and synthesis of various printed Antennas", Antennas and associated systems for mobile satellite communication, pp. 508-515.

  • K. F. Lee and W. Chen, 1997, "Advances in Microstrip and Printed Antennas", Wiley & Sons.

  • Y. Hu, D.R. Jackson et al. , October 2008, "Characterization of the Input Impedance of the Inset-Fed Rectangular Microstrip Antenna", IEEE Transactions on Antennas and Propagation, Vol. 56, No. 10, pp.3314-3318.

  • R. Q. Lee, K. F. Lee, 1990, "Experimental study of the two-layer electromagnetically coupled rectangular patch antenna", IEEE Trans Antennas Propag., Vol. 38, pp. 1298–1302.

  • Z. Liu, P. Kooi, L. Mook-Seng, 1999, "A method for designing broad-band microstrip antennas in multilayered planar structures", IEEE Trans Antennas Propag., Vol. 47, pp. 1416–1420.

  • A. Hongming, K. J. C. Nauwelaers, A. R. Van de Chapelle, 1994, "Broadband active microstrip antenna design with the simplified real frequency technique". IEEE Trans Antennas Propag., Vol. 42, pp. 1612–1619.

  • M.A. Matin and A.I. Sayeed, January 2010, "A Design Rule for Inset-fed Rectangular Microstrip Patch Antenna", WSEAS Transactions on Communications, ISSN: 1109-2742, Vol. 9, Issue 1, pp. 63-72.

  • M. M. Alam, August 2009, "Design and performance analysis of microstrip array antenna", In Progress in Electromagnetic Research Symposium Proceedings, Moscow, Russia.

  • M. Himdi, J. P. Daniel, C. Terret, 1989, "Transmission line analysis of aperture-coupled microstrip antenna", Electronics Letters, Vol. 25, No. 18, pp. 1229–1230.

  • S.-C.Wu, N.G. Alexopoulos, O. Fordham, October 1992, "Feeding structure contribution to radiation by patch antennas with rectangular boundaries", IEEE Trans. Antennas Propag., Vol. 40, pp. 1245– 1249.


Abstract Views: 143

PDF Views: 82




  • Accurate Modified Transmission Line Model For Inset-Fed Antennas Array Design

Abstract Views: 143  |  PDF Views: 82

Authors

BENDAHMANE Mohammed Fawzi
Telecommunications Laboratory (Faculty of Technology) Department of Physic, Faculty of Sciences, Abou-Bekr Belkaïd University, Tlemcen 13000, Algeria
ABRI Mehadji
STIC Laboratory (Faculty of Technology) Department of Telecommunications, Faculty of Technology, Abou-Bekr Belkaïd University, Tlemcen 13000, Algeria

Abstract


The work presented in this paper proposes the design of single Inset-fed antenna and antennas array with corporate feed network based on accurate modified transmission line model. The model developed is simple, accurate and takes into account all the characteristics of the antenna array and their feed system. To test this proposed model, the results obtained are compared with those obtained by the moment’s method (Agilent Momentum). The paper confirms the validity of the developed model by presenting several simulation results. The results obtained are then exposed and discussed.

Keywords


Printed Inset-fed antenna, antennas array, transmission line model, moment’s method (Momentum).

References