Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Modeling and analysis of surface roughness in fused deposition modeling based on infill patterns


Affiliations
1 Government Engineering College, Bikaner, Rajasthan 334 004, India
2 D Y Patil College of Engineering and Technology, Kolhapur, Maharastra 416 006,, India

This paper presents an approach of modeling for surface roughness of Polylactic Acid (PLA) polymer components printed with Fused Deposition Modeling (FDM) based Additive Manufacturing (AM) process. With additive manufacturing technology one can build the components of metal, polymers and variety of composites with good dimensional accuracy. FDM is one of the additive manufacturing process which is used to build products of various polymers. In this investigation PLA components are built using FDM with different Infill Patterns viz. Zigzag, Triangles and Gyroid. Based on surface roughness measurement of components, predictive mathematical models for surface roughness are generated for different infill patterns. The analysis of surface roughness based on layer thickness and infill pattern is presented. The error between predictive surface roughness and experimental surface roughness ranges between 0.1 to 9.5%. For this investigation Gyroid infill pattern shows favourable results for surface roughness. The workable ranges for process parameter under investigation are infill percentage of 70 to 90 %, layer thickness of 0.2 to 0.22 mm and printing speed of 70 to 90 mm/s.
User
Notifications
Font Size

Abstract Views: 94




  • Modeling and analysis of surface roughness in fused deposition modeling based on infill patterns

Abstract Views: 94  | 

Authors

Pooja Patil
Government Engineering College, Bikaner, Rajasthan 334 004, India
Sunil J Raykar
D Y Patil College of Engineering and Technology, Kolhapur, Maharastra 416 006,, India
Jaiprakash Bham
Government Engineering College, Bikaner, Rajasthan 334 004, India
Dharmendra Singh
Government Engineering College, Bikaner, Rajasthan 334 004, India

Abstract


This paper presents an approach of modeling for surface roughness of Polylactic Acid (PLA) polymer components printed with Fused Deposition Modeling (FDM) based Additive Manufacturing (AM) process. With additive manufacturing technology one can build the components of metal, polymers and variety of composites with good dimensional accuracy. FDM is one of the additive manufacturing process which is used to build products of various polymers. In this investigation PLA components are built using FDM with different Infill Patterns viz. Zigzag, Triangles and Gyroid. Based on surface roughness measurement of components, predictive mathematical models for surface roughness are generated for different infill patterns. The analysis of surface roughness based on layer thickness and infill pattern is presented. The error between predictive surface roughness and experimental surface roughness ranges between 0.1 to 9.5%. For this investigation Gyroid infill pattern shows favourable results for surface roughness. The workable ranges for process parameter under investigation are infill percentage of 70 to 90 %, layer thickness of 0.2 to 0.22 mm and printing speed of 70 to 90 mm/s.