Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Tensile and Fracture Toughness Behavior of Centrifugally Cast Al/Al2O3 Functionally Graded Materials


Affiliations
1 Department of Mechanical Engineering, Institute of Technology, Gopeshwar, Chamoli 246 401, India
2 Govind Ballabh Pant Institute of Engineering and Technology, Pauri-Garhwal 246 194, India
3 Department of Mechanical Engineering, National Institute of Technology Srinagar (Garhwal), Uttarakhand 246 174, India
4 Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad, Telangana 500 043, India
 

The mechanical characteristics like tensile strength and fracture toughness of aluminium-based functionally graded material (FGM) have been studied in the present work and correlated with the variation in the quantity of reinforcing particles. Aluminium based FGM with various compositions of reinforcing particles Al2O3 has been produced in the centrifugal casting set up rotating at a constant speed. The composition of reinforcing particles Al2O3 has varied from 3.0 to 7.5 Vol. %. ASTM standard has followed to prepare the samples for mechanical testing i.e. tensile and 3-point bend testing. Tensile strength and fracture toughness were calculated on each sample to study the deformation behaviour of Al alloy and FGM samples. A significant enhancement in the values of tensile and fracture measuring parameters has reported with an increase in % vol. of Al2O3 particles.

Keywords

Matrix Composite, Functionally Graded Materials, Scanning Electron Microscopy, Fracture Toughness, Tensile Strength.
User
Notifications
Font Size

  • Arunkumar S, Sundaram M S & Vigneshwara S, Mater Today: Proc, 33 (2020)484.

  • Miracle D B, Compos Sci Technol, 65(15-16) ( 2005)2526.

  • Saleh B, Jiang J, Ma A, Song D, Yang D & Xu, Q, Met Mater Int,(2019)1.

  • Duque N B, Melgarejo Z H,& SUHREZ O M, Mater Charact, 55(2) (2005)167.

  • Sobczak J J, & Drenchev L, J Mater Sci Technol, 29(4) (2013) 297.

  • Koizumi M F G M, FGM activities in Japan. Compos Part B: Eng, 28(1-2)(1997) 1.

  • Udupa G, Rao S S, & Gangadharan K V, Procedia Mater Sci, 5(2014) 1291.

  • Naito K, J Mater Eng Perfor, 25(5) (2016) 2074.

  • Ceschini L, & Montanari R eds, Trans Tech Publications Ltd.(2011)

  • Rajan T P D, Pillai R M, & Pai B C , J mater Sci, 33(14) (1998) 3491.

  • Verma V & Kumar B.M, Mater Today: Proc, 4(2)(2017) 3062.

  • Tevatiaa A& Srivastava S. K., Indian J Eng Mater Sci, 27(2020)348.

  • Panwer N & Chauhan A., Sci Ind Res, 77 (2018) 646-651.

  • Mohapatra S, Sarangi H& Mohanty U.K, Manuf Rev, 7(2020)26.

  • Canakci A, Varol T, Özkaya S & Erdemir F, Univers J MaterSci, 2(5) (2014)90.

  • Bhavar V, Kattire P, Thakare S & Singh, R. K. P, Mater Sci Eng, Vol. 229(2017) 012.

  • Tripathy A, Sarangi S K & Chaubey A K, Int J Eng Technol, 7(2018).

  • Feng K, Chen H, Xiong JI & Guo Z, Mater Des, 46(2013)622.

  • Shariat B S, Meng Q, Mahmud A S, Wu Z, Bakhtiari R, Zhang J, Motazedian F, Yang H, Rio G, Nam T H & Liu Y, Mater Des, 124 (2017)225.

  • Erdemir F, Canakci A & Varol T, T Nonferr Metal Soc China, 25(11)(2015) 3569.

  • Cuppoletti J ed, Bo D–Books on Demand.(2011)

  • Eidel’man E D & Durnev M A, Tech Phy, 63(11) (2018) 1615.

  • Naebe M & Shirvanimoghaddam K, Appl Mater Today, 5 (2016) pp. 223.

  • Chirita G, Soares D & Silva F S,Mater Des29(1) (2008) 20.

  • Ulukoy A, Topcu M & Tasgetiren S, Proc I Mech E Part J: J EngTribol, 0(0) (2015)1.

  • Ramasamy M, Moorthy E S, Balasubramanian A, Kumaran P K S, Baig M B N, Alagappan S & Moorthy M, Indian J Eng Mater Sci, 28 (2021) 300.

  • El-GalyI M, Ahmed M H, Alex Eng J, (2017) 1.

  • Saadatmand M, & Aghaza deh Mohandesi J, The Indian Inst Met– IIM, (2014)

  • Guo J F, Liu J, Sun C N, Maleksaeedi S, G Bi, Tan M J, Wei, J, Mater Sci Engg:A,602 (2014) 143.

  • Shafiei Zarghani A, Kashani Bozorg S F, & Zarei Hanzaki A, Mater Sci Eng A, 500 (2009) 84.

  • Tohgo K, Suzuki T, & Araki H, Eng Frac Mech, 72 (2005) 2359.

  • Rousseau C E, & Tippur H V, Acta Mater, 48(2000) 4021.

  • Sathiskumar R, Mater Charact, (2013) 84.

  • Lin J S & Miyamoto Y, Acta Mater, 48(2000) 767.

  • Moon R J, Hoffman M, Hilden J, Bowman K J, Trumble K P, & Rodel, J,Eng Frac Mech, 69( 2002) 1647.

  • Rodriguez Castro R, Wetherhold R C, & Kelestemur M H, Mater Sci Eng A,323(2002). 445.

  • ASTM E399-05 American Society for Testing and Materials, Philadelphia, (2005).

  • Kumar B, Mer K K S, & Prasad L, Trends Mater Eng, (2019) 6

  • Thirtha Prasad H P, Chikkanna N, IJAET/Vol.II/ Issue IV, (2011) 161.

  • Vieira A C, Sequeira P D, Gomes J.R& Rocha L A,Wear, 267 (2009) 585.

  • Mutuka T,&GürbüzM, Indian J Eng Mater Sci, 27(2020), 1027.

  • UlukoyA, Topcu M, & TasgetirenS, Chapter 5, (2016).

  • Li CQ, Xu DK, Zu TT, et al. JMagnesAlloys,56(2) (2015) 106.

  • Yu Dai, Quan yang Ma, Wei ting Liu, et al, Mater Sci Technol, (2017).

  • Bhowmik A, Dey D & Biswas A, Indian J Eng Mater Sci, 28 (2021)46.

  • Singh, S & Chauhan N R, Indian J Eng Mater Sic, 28 (2021) 189.

  • Kim D, Park K, Chang M, Joo S, Hong S, Cho S & Kwon H, Met(2019) 8.

  • Jin Z H & Batra R C, J mech Phys Solids,44, 8 (1996) 1221.

  • Hohenwarter A, Pippen R, Scr. Mater, 64(2011) 982.

  • Hohenwarter A & Pippen R, Mater Sci Eng, A527(2010) 2649.

  • Amit J, Yogesha K K, Nikhil K & Jayaganthan R, Metallogr Microstruct Anal, 5, no. 6 (2016) 540.

  • ASTM, E. ‘‘399-05’’ (2005).

  • Watanabe Y & Fukui Y, Metall Mater Sci,4 (2000) 51.

  • Shaurya P, Amit J & Manoj K P, Metallogr Microstruct Anal, 8 no. 5 (2019): 581.

  • Wang Y M, Ma E, Acta Mater, 52(2004) 1699.

  • Lai M O, Eng Fract Mech, 27, 121 (1987)

  • TochaeeE B, Hosseini H R M & Reihani S M S, J Alloys Compd, 681, 1(2016) 2, A. E992, (1984).


Abstract Views: 187

PDF Views: 137




  • Tensile and Fracture Toughness Behavior of Centrifugally Cast Al/Al2O3 Functionally Graded Materials

Abstract Views: 187  |  PDF Views: 137

Authors

Bhupendra Kumar
Department of Mechanical Engineering, Institute of Technology, Gopeshwar, Chamoli 246 401, India
Amit Joshi
Govind Ballabh Pant Institute of Engineering and Technology, Pauri-Garhwal 246 194, India
Krishan Kant Singh Mer
Department of Mechanical Engineering, Institute of Technology, Gopeshwar, Chamoli 246 401, India
Lalta Prasad
Department of Mechanical Engineering, National Institute of Technology Srinagar (Garhwal), Uttarakhand 246 174, India
Indradeep Kumar
Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad, Telangana 500 043, India

Abstract


The mechanical characteristics like tensile strength and fracture toughness of aluminium-based functionally graded material (FGM) have been studied in the present work and correlated with the variation in the quantity of reinforcing particles. Aluminium based FGM with various compositions of reinforcing particles Al2O3 has been produced in the centrifugal casting set up rotating at a constant speed. The composition of reinforcing particles Al2O3 has varied from 3.0 to 7.5 Vol. %. ASTM standard has followed to prepare the samples for mechanical testing i.e. tensile and 3-point bend testing. Tensile strength and fracture toughness were calculated on each sample to study the deformation behaviour of Al alloy and FGM samples. A significant enhancement in the values of tensile and fracture measuring parameters has reported with an increase in % vol. of Al2O3 particles.

Keywords


Matrix Composite, Functionally Graded Materials, Scanning Electron Microscopy, Fracture Toughness, Tensile Strength.

References