Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Effect of Interface on Elastic Properties for Hybrid Smart Nanocomposites Using Micromechanics Based Mori Tanaka Technique


Affiliations
1 Mechanical Engineering Department, Rajasthan Technical University Kota 324 010, India
2 Mechanical Engineering Department, IIT(ISM) Dhanbad 826 004, India
3 Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad 500 043, India
4 Department of Mechanical and Industrial Engineering Technology, University of Johannesburg 2006, South Africa
 

Carbon nanotube (CNT) reinforced composites are an extensive and convoluted research domain, in particular their modelling and simulation. These nanocomposites have been continuously researched for enhanced mechanical properties. The interface is supposedly the layer created around the CNTs embedded in a matrix with easily distinguishable properties. To exploit the true potential of nanocomposites and their hybrids, the evaluation of their interface characteristics and their effect on mechanical properties is a crucial aspect. A new model consisting of a hybrid smart composite reinforced with CNTs and piezoelectric fibers has been proposed. Understanding the significance of interface in hybrid nano composites is the key concept of this paper. To analyse the mechanical performance in the proposed composite, the evaluation of interfaces is performed using the micromechanics-based Mori Tanaka technique. The results show that both the longitudinal and transverse elastic properties of hybrid smart nanocomposites increase significantly linearly with the use of interface and agree well with the micromechanics-based strength of materials approach. Taking this into consideration, the interface promotes prophecy of nanocomposites for novel structural and wearable smart textile applications.

Keywords

Piezoelectric Fiber, Carbon Nanotube, Mori Tanaka Technique, Interface, Nanocomposite.
User
Notifications
Font Size

  • Iijima S, Nature, 354 (1991) 56.

  • Jang Kyo K & Yiu Wing M, Compos Sci Tech, 41 (1991) 333.

  • Joshi M & Bhattacharyya A, Textile Prog, 43 (2011) 155.

  • Jia Lin T, Shi Hua T C & Yu Tsung, Compos Part B: Engg, 41 (2010) 106.

  • Sharma S K, Saxena K K, Malik V, Kahtan A M, Chander Prakash, Buddhi D & Dixit S, Crystals, 12 (2022) 1138.

  • Sharma S K & Saxena K K, Mater Today Proc, 56 (2022) 2278.

  • Balguri P K, Samuel D G H & Thumu U Mater Today Proc, 44 (2021) 346.

  • Hassanzadeh-Aghdam M K, Ansari R & Abolfazl D, Mech Adv Mater Struct, 26 (2019) 2047.

  • Godara S S & Sharma N, Handbook of Carbon Nanotubes (2021, Springer, Cham.

  • Aghdam M K H, Reza Ansari, & Abolfazl D, Int J Eng Sci, 130 (2018) 215.

  • Godara S S & Mahato P K, Mater Today Proc, 18 (2019) 5327.

  • Ray M C & Batra R C, J Appl Mech,76 (3) (2009) 0345031

  • Ray M C, Smart Mater Struct, 19 (2010) 035008.

  • Godara S S, & Mahato P K, Mech Adv Mater Struct, 29:14 (2022) 2065

  • Kundalwal S I & Ray M C, Int J Mech Mater Des, 7 (2011) 149.

  • Joshi P & Upadhyay S H, Comput Mater Sci, 87 (2014) 267.

  • Lina R, Lenaik B, Jean F C & Joliff Y, Compos Struct, 198 (2018) 109.

  • Li Y & Seidel G D, Comput Mater Sci, 153 (2018) 363.

  • Godara S S, Mahato P K & Saxena K K, Ind J Eng Sci, 29 (2022) 299.

  • Patel V, Joshi U, Joshi A, Oza AD, Prakash C, Linul E, Campilho RDSG, Kumar S & Saxena K K, Materials, 15(20) (2022) 7263.

  • Woigk W, Fuentes C A, Rion J, Hegemann D, Vuure A W, Dransfeld C, & Masania K, Compos Part A: App Sci Manuf, 122 (2019) 8.

  • Singh Thingujam, Jackson Samanta & Sutanu. Ind J Fib Tex Res, 42 (2017) 230.

  • Jonathan C, Agrawal A & Reza M, Comput Mater Sci, 178 (2020) 109621.

  • Ling L & Zhengming H, Acta Mech Solida Sin, 27 (2014) 234.

  • Benveniste Y, Mech Mater, 18 (1994) 183.

  • Chen T, Dvorak G J & Benveniste Y, ASME J Appl Mech, 59 (1992) 539.

  • Ebrahim S, Yangbo G, Daniel C, & Shim Victor P W, Int J Mech Sci, 180 (2020) 105699.

  • Guorui W, Luqi L & Zhong Z, Compos Part A: Appl Sci Manuf, 141 (2021) 106212.

  • Palizvan M, Homayuon Sadr M & Abadi Tahaye M, Mater Today Comm, 23 (2020) 100856.

  • Babu K Sivaji Rao, Mohana Raju K, Rama Chandra Murthy V, Bala Krishna Kumar & Niranjan M S R, Ind J Fibre Text Reser, 15 (2008) 382.

  • Hong Cai Xuan Li, Chenglin Chu, Feng Xue, Chao Guo, Qiangsheng Dong & Jing Bai, Compos Sci and Tech, 183 (2019) 107801.

  • Tran V P, Brisard S, Guilleminot J & Sab K, Inter J Solids Struct, 146 (2018) 55.

  • Anurag Namdev, Rajesh Purohit, Amit Telang, Ashish Kumar, Saxena K K, Sipokazi Mabuwa, Velaphi Msomi & Kahtan A Mohammed, Mater Res Express 9 (2022) 065303.

  • Yang Sun, Yifeng Hu & Mabao Liu, Mater & Des, 199 (2021) 109421.

  • Singha K, Kumar J & Pandit P, Mater Today Proc, 16 (2019) 1518.

  • Foroughi J, Mokhtari F, Cheng Z X, Raad R & J Xi, J, J Mater Chem A, 8 (2020) 9496.

  • Shen, Lianxi & Li Jackie, Phys Rev B, 69 (2004) 045414.

  • Mori T & Tanaka K, Acta Metall, 21(5) (1973) 571.

  • Dunn M L & Ledbetter H, J App Mech, 62 (1995) 1023.

  • Huang H Jin, J App Phy, 83 (1998) 5364.


Abstract Views: 78

PDF Views: 53




  • Effect of Interface on Elastic Properties for Hybrid Smart Nanocomposites Using Micromechanics Based Mori Tanaka Technique

Abstract Views: 78  |  PDF Views: 53

Authors

S. S. Godara
Mechanical Engineering Department, Rajasthan Technical University Kota 324 010, India
P. K. Mahato
Mechanical Engineering Department, IIT(ISM) Dhanbad 826 004, India
Indradeep Kumar
Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad 500 043, India
Mukul Shukla
Department of Mechanical and Industrial Engineering Technology, University of Johannesburg 2006, South Africa

Abstract


Carbon nanotube (CNT) reinforced composites are an extensive and convoluted research domain, in particular their modelling and simulation. These nanocomposites have been continuously researched for enhanced mechanical properties. The interface is supposedly the layer created around the CNTs embedded in a matrix with easily distinguishable properties. To exploit the true potential of nanocomposites and their hybrids, the evaluation of their interface characteristics and their effect on mechanical properties is a crucial aspect. A new model consisting of a hybrid smart composite reinforced with CNTs and piezoelectric fibers has been proposed. Understanding the significance of interface in hybrid nano composites is the key concept of this paper. To analyse the mechanical performance in the proposed composite, the evaluation of interfaces is performed using the micromechanics-based Mori Tanaka technique. The results show that both the longitudinal and transverse elastic properties of hybrid smart nanocomposites increase significantly linearly with the use of interface and agree well with the micromechanics-based strength of materials approach. Taking this into consideration, the interface promotes prophecy of nanocomposites for novel structural and wearable smart textile applications.

Keywords


Piezoelectric Fiber, Carbon Nanotube, Mori Tanaka Technique, Interface, Nanocomposite.

References