Open Access
Subscription Access
Nd Modified BiFeO3 Perovskites: Investigations on their Structural, and Magnetic Properties
The present work focuses on the examination of the structural and magnetic characteristics of Bi1-XNdXFeO3 (0≤x≤0.12) nanoparticles prepared using an efficient wet chemical method, Pechini's modified sol-gel route via auto combustion. BiFeO3 (BFO) is a perovskite multiferroic material which is generally termed as ABO3 where A is Bi or any Rare earth element and B is usually Fe3+ or Mn3+are looked with great hopes due to its wide possible potential applications such as data storage devices, sensors, Na+ion batteries, spintronics, and magnetoelectric devices. The BFO has sometimes termed a futuristic semiconductor material as a replacement for Silicon by the scientific community. The synthesis process of the nanoparticles involves obtaining the pristine single-phase Bismuth Ferrite (BFO) followed by Nd3+ substitutions at the Bisite to investigate the effects of Nd3+ doping in the perovskite system. Characterization techniques such as X-ray diffraction (XRD) are performed in order to confirm the formation of single-phase materials with the desired crystal structure and phase purity. High-Resolution Transmission Electron Microscopy (HRTEM) reveals the formation of distorted rhombohedral structures of NPs with average particle sizes ranging between 18 nm to 50 nm. The magnetic properties are evaluated using a vibrating sample magnetometer (VSM) and Electron Spin Resonance (ESR) to assess the influence of Nd3+ doping on the magnetic behavior of the nanoparticles. The experimental results demonstrate the significant impact of Nd3+ doping on the magnetic ordering and saturation magnetization of BiFeO3. This research contributes valuable insights into the structural and magnetic properties of Nd-doped BFO nanoparticles, paving the way for the development of advanced magnetoelectric devices with enhanced magnetic functionality.
Keywords
Bismuth Ferrite (BFO), Multiferroics, Rare earth doped BFO, ME memory devices.
User
Font Size
Information
- Iorgu A I,Maxim F,Matei C, Ferreira L P,Ferreira P, Cruz M M, and Berger D, J Alloys Compd, 629(2015)62.
- Preethi A Joana, Sharmili T, Vigneshwaran J, Jose S P, and Ragam M, Mater Sci Eng B, 290(2023)116296.
- Jain P, Shankar S, & Thakur O P, Mater Today Proce, 67(2022)742.
- Irandoust RandGholizadeh A, Solid State Sci, 101(2020) 106142.
- Sahu A K, Satpathy S K, Rout S K, and Behera B, Trans Electr Electron Mater, 21(2020)217.
- Sati P Chandra, Arora M, Chauhan S, Kumar M, and Chhoker S, J Phys Chem Solids, 75(2014)105.
- Gaur A, Singh P, Choudhary N, Kumar D, Shariq M, Singh K, Kaur N, and Kaur D, Phys B Condens Matter, 406(2011)1877.
- Sharma S, Kumar A & Thakur O P, J Mater Sci: Mater Electron, 34(2023)2050.
- Shankar S, Maurya I, Raj A, Singh S, Thakur O P, Appl Phys A, 126(2020)686.
- L Phor, and V Kumar, J Adv Ceram, 9(2020)243.
- Kumar P and Kar M, Phys B Condens Matter, 448(2014)90.
- Kumar M, Shankar S, Parkash O, Thakur O P, J Mater Sci: Mater Electron, 25(2014)888
- Hernández N, González-González V A, Dzul-Bautista I B, Gutiérrez J, Barandiarán J M, Larramendi I Ruiz De, Cienfuegos-Pelaes R F, and Ortiz-Méndez U, J Alloys Compd, 638(2015)282.
- Kumar K S, RamuS, Sudharani A, Ramanadha M, Murali G, and VijayalakshmiR P, Phys E Low-Dimensional Syst Nanostructures, 115(2020)113689.
- Gautam A, Singh K , Sen K, Kotnala R K, and Singh M, Mater Lett, 65(2011)591.
Abstract Views: 116
PDF Views: 73