Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Regression and Cluster Analysis of GGBS Based Geopolymer Compositeat Different Proportion of Ceramic Dust


Affiliations
1 Department of Civil Engineering, National Institute of Technology Delhi, Delhi 110 036, India
2 Department of Civil Engineering, GLA University, Mathura 281 406, India
3 Division of Research and Development, Lovely Professional University, Punjab 144 411, India
4 Department of Mechanical Engineering, Institute of Aeronautical Engineering, Hyderabad 500 043, India
5 Department of Mechanical Engineering, New Horizon College of Engineering, Bangalore 560 037, India
6 Visvesvaraya Technological University, Belagavi 590 018, India
7 Department of Mathematics and Information Technologies, Tashkent State Pedagogical University, Bunyodkor avenue, 27, Tashkent, 100 070, Uzbekistan

In compare to Portland cement, geopolymer have much lower CO2 emissions, which led to growing interest in their use as an environmentally sustainable binder. The investigation of the strength in compression and durability characteristics of geopolymer composite produced at various calcined clay and ground granulated blast furnace slag (GGBS) proportions (up to 50:50) with 12M of sodium hydroxide and ratio of sodium silicate to sodium hydroxide as 2. The strength of the produced composites was evaluated after 7, 28, 56 and 90 days of ambient air curing. The durability characteristics were evaluated using Rapid Chloride Permeability Test (RCPT), acid and sulfate attack using 5% MgSO4 and 5% H2SO4 solutions respectively and for the integrity using ultrasonic pulse velocity (UPV) test. Test results showed that the developed GPC (Geopolymer composite) has several advantages over standard concrete. The strength in compression (MPa) of the SC100 (standard concrete) as compared to Geopolymer Concrete in Compressive strength was increased by replacing GGBS with calcined clay up to 10%. At 56 and 90 days, the compressive strength of 10% calcined clay samples were improved by 20.15% and 21.60% respectively as compared to the SC100. Correlations showed that strength is having a strong relationship with the chloride ion permeability and the pulse velocities.

Keywords

Sustainable environment, Geopolymer composite, Chloride ion permeability, Acid attack; Sulfate attack
User
Notifications
Font Size

Abstract Views: 72




  • Regression and Cluster Analysis of GGBS Based Geopolymer Compositeat Different Proportion of Ceramic Dust

Abstract Views: 72  | 

Authors

Arun Kumar Parashar
Department of Civil Engineering, National Institute of Technology Delhi, Delhi 110 036, India
Ajay Kumar
Department of Civil Engineering, National Institute of Technology Delhi, Delhi 110 036, India
Nakul Gupta
Department of Civil Engineering, GLA University, Mathura 281 406, India
Kuldeep K Saxena
Division of Research and Development, Lovely Professional University, Punjab 144 411, India
Naveenkrishna Alla
Department of Mechanical Engineering, Institute of Aeronautical Engineering, Hyderabad 500 043, India
Rakesh Chandrashekar
Department of Mechanical Engineering, New Horizon College of Engineering, Bangalore 560 037, India
Vinayak Malik
Visvesvaraya Technological University, Belagavi 590 018, India
Dilsora Abduvalieva
Department of Mathematics and Information Technologies, Tashkent State Pedagogical University, Bunyodkor avenue, 27, Tashkent, 100 070, Uzbekistan

Abstract


In compare to Portland cement, geopolymer have much lower CO2 emissions, which led to growing interest in their use as an environmentally sustainable binder. The investigation of the strength in compression and durability characteristics of geopolymer composite produced at various calcined clay and ground granulated blast furnace slag (GGBS) proportions (up to 50:50) with 12M of sodium hydroxide and ratio of sodium silicate to sodium hydroxide as 2. The strength of the produced composites was evaluated after 7, 28, 56 and 90 days of ambient air curing. The durability characteristics were evaluated using Rapid Chloride Permeability Test (RCPT), acid and sulfate attack using 5% MgSO4 and 5% H2SO4 solutions respectively and for the integrity using ultrasonic pulse velocity (UPV) test. Test results showed that the developed GPC (Geopolymer composite) has several advantages over standard concrete. The strength in compression (MPa) of the SC100 (standard concrete) as compared to Geopolymer Concrete in Compressive strength was increased by replacing GGBS with calcined clay up to 10%. At 56 and 90 days, the compressive strength of 10% calcined clay samples were improved by 20.15% and 21.60% respectively as compared to the SC100. Correlations showed that strength is having a strong relationship with the chloride ion permeability and the pulse velocities.

Keywords


Sustainable environment, Geopolymer composite, Chloride ion permeability, Acid attack; Sulfate attack