Open Access Open Access  Restricted Access Subscription Access

Impact of Activated Carbon Contents on Cabin Air Filter Performance At Different Fume Flow Rates


Affiliations
1 Bannari Amman Institute of Technology, Sathyamangalam, Erode 638 401, India
2 Dr. B R Ambedkar National Institute of Technology, Jalandhar 144 011, India
 

The present study has been undertaken to analyze the filtration performance of two different nonwoven polypropylene filter media, viz. needle felt and spun-bonded sandwiched with granular activated carbon of varying concentration under different face velocities. The materials are studied on a laboratory based cabin air filter test rig. Spun bonded material reveals relatively lower emission and pressure drop. Interestingly, lower face velocity reveals relatively improved filter behavior in case of both the filter materials. Further, a reduction in downstream emission in terms of PM2.5 & PM10, number concentration and peal pressure drop is observed at higher concentration of activated carbon.

Keywords

Cabin Air Filter, Granular Activated Carbon, Nonwoven Needle Felt, Number Concentration, Pressure Drop, Polypropylene Filter, Spun-Bond Fabric.
User
Notifications
Font Size

  • Dockery DW, Pope CA, Xu XP, Spengler JD, Ware JH, Fay ME, Ferris BG & Speizer FE, New Engl J Med, 329 (1993) 1753.
  • Araki A, Kawai T, Eitaki Y, Kanazawa A, Morimoto K, Nakayama K, Shibata E, Tanaka M, Takigawa T, Yoshimura T, Chikara H, Saijo Y & Kishi R, Sci Total Environ, 408 (2010) 2208.
  • Klepeis NK, Nelson WC, Ott WR, Robinson JP, Tsang AM, Switzer P, Behar JV, Hern SC & Engelmann WH, J Expo Anal Environ Epidemiol, 11 (2001) 231.
  • Hudda N, Kostenidou E, Sioutas C, Delfino RJ & Fruin SA, Environ Sci Technol, 45 (2011) 8691.
  • Zhu Y, Eiguren-Fernandez A, Hinds WC & Miguel A, Environ Sci Technol, 41(2007) 2138.
  • Bigazzi A & Figliozzi M, Atmos Environ , 60 (2012) 495. 7 Knibbs LD, Cole-Hunter T & Morawska L, Atmos Environ, 45(2011)2611.
  • Leung PL & Harrison RM, Atmos Environ, 33(1999)191.
  • Geiss O, Tirendi S, Barrero-Moreno J & Kotzias D, Environ Int , 35 (2009)1188.
  • Mandalakis M, Stephanou EG, Horii Y & Kannan K, Environ Sci Technol, 42 (2008) 6431.
  • Xu B, Chen X & Xiong J, Indoor and Built Environ, 27 (2016) 1.
  • Fedoruk MJ & Kerger BD, J Exposure Anal Environ Epidemiol, 13 (2003) 31.
  • Yoshida T & Matsunaga I, Environ Int, 32 (2006)58.
  • You KW, Ge YS, Hu B, Ning ZW, Zhao ST, Zhang YN & Xie P, J Environ Sci, 19 (2007) 1208.
  • Chen XK, Feng LL, Luo HL & Cheng HM, Environ Sci Pollut Res, 21 (2014)12868.

Abstract Views: 192

PDF Views: 112




  • Impact of Activated Carbon Contents on Cabin Air Filter Performance At Different Fume Flow Rates

Abstract Views: 192  |  PDF Views: 112

Authors

Sudev Dutta
Bannari Amman Institute of Technology, Sathyamangalam, Erode 638 401, India
Arunangshu Mukhopadhyay
Dr. B R Ambedkar National Institute of Technology, Jalandhar 144 011, India
Tathagata Das
Dr. B R Ambedkar National Institute of Technology, Jalandhar 144 011, India

Abstract


The present study has been undertaken to analyze the filtration performance of two different nonwoven polypropylene filter media, viz. needle felt and spun-bonded sandwiched with granular activated carbon of varying concentration under different face velocities. The materials are studied on a laboratory based cabin air filter test rig. Spun bonded material reveals relatively lower emission and pressure drop. Interestingly, lower face velocity reveals relatively improved filter behavior in case of both the filter materials. Further, a reduction in downstream emission in terms of PM2.5 & PM10, number concentration and peal pressure drop is observed at higher concentration of activated carbon.

Keywords


Cabin Air Filter, Granular Activated Carbon, Nonwoven Needle Felt, Number Concentration, Pressure Drop, Polypropylene Filter, Spun-Bond Fabric.

References