Indian Journal of Fibre & Textile Research

Open Access Open Access  Restricted Access Subscription Access

Recycling of Waste PET for Functionalised Textile Finishing


Affiliations
1 Department of Fibres & Textile Processing Technology, Institute of Chemical Technology, Mumbai 400 019, India
 

The glycolysis of waste bottles made of polyethylene terephthalate (PET) has been carried out at 190°C for 8 h with sodium acetate catalyst. Products of reaction are then characterised by spectroscopy, thermogravimetry and calorimetry. The bis-hydroxyethyl terephthalate (BHET) obtained from the reaction is formulated using an emulsifying and dispersing agent and further utilised as an antistatic finishing chemical for imparting functional effect on polyester textile. The application has been performed by padding polyester fabric with a solution containing antistatic agents of different concertations (10, 20 and 40 g/L), followed by drying at 110° C for 60 s and then thermoset at 170°C for 40 s. The treated fabric is compared with a commercial antistatic agent for functional performance and then evaluated in terms of absorbency, wicking height, charge decay time, and hand feel. The results show that the fabric finished with 20 g/L BHET based formulation performs better than the commercial antistatic agent finished fabric, and the waste PET bottles can be effectively utilised as a textile finishing chemical.

Keywords

Antistatic Effect, Auxiliary Formulation, Functional Finishing, PET Valorisation, Polyethylene Terephthalate, Polyester Fabric, Waste Treatment.
User
Notifications
Font Size

  • Pang K, Kotek R & Tonelli A, Prog Polym Sci, 31 (2006) 11.

  • Patil H, Raichurkar P & Shivankar V, Int J Text Eng Proc, 3 (2017) 4.

  • Katsevman M, Pavlov A & Kruglov P, Reinforced Plastics, 62(6) (2018) 1.

  • Https://Plasticoceans.Org/the-Facts/ (accessed on 8 February 2022).

  • Palacios-Mateo C, van der Meer Y & Seide G, Environ Sci Eur, 33(1) (2021) 2.

  • Seghiri M, Boutoutaou D, Kriker A & Hachani M I, Energy Procedia, 119 (2017) 163.

  • Ahmad N F A, Razali S N M, Sahat S & Kaamin M, Proceedings, 3rd International Conference on Applied Science and Technology, Penang, Malaysia (AIP Publishing), 2018, 0200151.

  • Malik N, Kumar P, Shrivastava S & Ghosh S B, Int J Plastics Technol, 21(1) (2017) 1.

  • Pimpan V, Sirisook R & Chuayjuljit S, J Appl Polym Sci, 88(3) (2003) 788.

  • Ragaert K, Delva L & van Geem K, Waste Management, 69 (2017) 24.

  • https://www.precedenceresearch.com/textile-auxiliaries-market (accessed on 2 February 2022).

  • Kan C W & Yuen C W M, Nuclear Inst Meth Phys Res, 266(1) (2008) 127.

  • Yuan P, Liu B & Sun H, Crystal Res Technol, 56(11) (2021) 2100025.

  • Zhou X, Lu X, Wang Q, Zhu M, & Li Z, Pure Appl Chem, 84(3) (2012) 789.

  • Latifa B, Zohra F F & Said H, Adv Polym Technol, 2020 (2020) 1.

  • Al-Sabagh AM, Yehia FZ, Eissa AM, Moustafa ME, Eshaq G, Rabie AM & Elmetwally AE, Polym Degradation Stability, 110 (2014) 364.

  • Silva CV, Silva Filho EA, Uliana F, Jesus LF, Melo CV, Barthus RC, Rodrigues JG & Vanini G, Polímeros, 28(5) (2018) 450.


Abstract Views: 128

PDF Views: 104




  • Recycling of Waste PET for Functionalised Textile Finishing

Abstract Views: 128  |  PDF Views: 104

Authors

Kanhaya Lal Kumawat
Department of Fibres & Textile Processing Technology, Institute of Chemical Technology, Mumbai 400 019, India
Harshal Patil
Department of Fibres & Textile Processing Technology, Institute of Chemical Technology, Mumbai 400 019, India
Ashok Athalye
Department of Fibres & Textile Processing Technology, Institute of Chemical Technology, Mumbai 400 019, India

Abstract


The glycolysis of waste bottles made of polyethylene terephthalate (PET) has been carried out at 190°C for 8 h with sodium acetate catalyst. Products of reaction are then characterised by spectroscopy, thermogravimetry and calorimetry. The bis-hydroxyethyl terephthalate (BHET) obtained from the reaction is formulated using an emulsifying and dispersing agent and further utilised as an antistatic finishing chemical for imparting functional effect on polyester textile. The application has been performed by padding polyester fabric with a solution containing antistatic agents of different concertations (10, 20 and 40 g/L), followed by drying at 110° C for 60 s and then thermoset at 170°C for 40 s. The treated fabric is compared with a commercial antistatic agent for functional performance and then evaluated in terms of absorbency, wicking height, charge decay time, and hand feel. The results show that the fabric finished with 20 g/L BHET based formulation performs better than the commercial antistatic agent finished fabric, and the waste PET bottles can be effectively utilised as a textile finishing chemical.

Keywords


Antistatic Effect, Auxiliary Formulation, Functional Finishing, PET Valorisation, Polyethylene Terephthalate, Polyester Fabric, Waste Treatment.

References