Indian Journal of Fibre & Textile Research

Open Access Open Access  Restricted Access Subscription Access

Development of Two Novel Methods Using Sensors to Operate the Industrial Over-Lock Machine for Loco-Motor Disabled Person


Affiliations
1 Department of Fashion Technology, Sona College of Technology, Salem 636 005, India
 

In this research, two sensor-based methods have been developed to operate industrial over-lock sewing machine, especially for loco-motor disabled person. Generally, the over-lock sewing machine is operated using foot pedal and this sensor based method eliminates the foot pedal and use alternative ways to sew garment. The method-1 uses a flex-touch sensor and method-2 uses a textile sensor integrated wearable hand glove to operate the over-lock sewing machine. The seam efficiency of over-lock stitches performed using both the methods (1 & 2) has been assessed and compared with that of normal foot pedal method. A variety of woven and knitted garments are sewed by implementing both the methods, and results are evaluated to calibrate and standardize the sensors/methods to encourage loco-motor disabled persons as self-employed sewing operators.

Keywords

Conductive Fabric, Loco-Motor Disabled Persons, Over-Locksewing Machine, Textile Sensor, Touch Sensor, Wearable Hand Gloves.
User
Notifications
Font Size

  • SureshSS, Raja D& Mani K, Indian J Fibre Text Res, 44 (3) (2019) 314

  • Misios I H, Koustoumpardis P N & Aspragathos N A, AdvIntelligent Systems Computing, 980 (2020)104

  • Book Wayne J, Winck Ryder C, Killpack Marc D, Huggins James D, Dickerson Stephen L, Jayaraman Sundaresan, Collins Thomas R&Prado Ronald J,. Proceedings, International Symposium on Flexible Automation (ISFA), 12-14 July 2010.

  • Zhou P, Xu K& Wang D,IEEE Access, 6(2018) 16423

  • Yoshimi T, Takezawa K & Hirayama M, IFAC Papers On Line, 51(22)(2018) 1.

  • Sawato T,Yamada H &Takikoshi K, U S Pat 5,208,520, 4May1993.

  • Katsuhiro Fujikawa, U S Pat 4,915,045, 10 April1990.

  • Tim Lewis, Studies Design Education J, 13(2)(1981) 201.

  • Curry Z D &Leamon T B, National Center for Biotechnol Information J, 24(4)(1993)284.

  • Li G, Haslegrave C M & Corlett E N, Appl Ergonomics J, 26(1)(1995)35

  • Satomi Yamauchi, U S Pat 4,840,135, 20 June1989.


Abstract Views: 66

PDF Views: 73




  • Development of Two Novel Methods Using Sensors to Operate the Industrial Over-Lock Machine for Loco-Motor Disabled Person

Abstract Views: 66  |  PDF Views: 73

Authors

S S Suresh
Department of Fashion Technology, Sona College of Technology, Salem 636 005, India
D Raja
Department of Fashion Technology, Sona College of Technology, Salem 636 005, India

Abstract


In this research, two sensor-based methods have been developed to operate industrial over-lock sewing machine, especially for loco-motor disabled person. Generally, the over-lock sewing machine is operated using foot pedal and this sensor based method eliminates the foot pedal and use alternative ways to sew garment. The method-1 uses a flex-touch sensor and method-2 uses a textile sensor integrated wearable hand glove to operate the over-lock sewing machine. The seam efficiency of over-lock stitches performed using both the methods (1 & 2) has been assessed and compared with that of normal foot pedal method. A variety of woven and knitted garments are sewed by implementing both the methods, and results are evaluated to calibrate and standardize the sensors/methods to encourage loco-motor disabled persons as self-employed sewing operators.

Keywords


Conductive Fabric, Loco-Motor Disabled Persons, Over-Locksewing Machine, Textile Sensor, Touch Sensor, Wearable Hand Gloves.

References